MMM-MotionEye - surveillance video stream on your mirror!

Cato

@lolobyte As long as the software can provide a “motion jpeg”-stream, it can be supported.

Basically, you can test it your selv by making a local .html-file with <img src="xxxxx" />

emos

For some reason i just get a “broken” picture icon, and if i try to open http://MotionEyeIP/motioneye/1 the site just says:

{"error": "not found"}

I have disable the password for the ‘Surveillance Username’ so no login is required.

I know the cam is available and motioneyos is working as normal. If i open http://192.168.1.200:8080/picture/1/current/ in my browser i can see the last snapshot, but not doing me any good…

Any suggestion?

{
	module: 'MMM-MotionEye',
	position: 'bottom_right',
	config: {
		url: "http://192.168.1.200:8080/motioneye/1",
		debug: false
		}
},

shashank

@emos hi, try changing the port (8080) in MM or camera , both MM and camera with 8080 will not work

Cato

@emos The URL you are using in your config seems to be the “web hook”-URL that you have to configure inside MotionEye if you want to automatically show video stream when motion is detected.

The URL should be configured like this (from documentation): Video Streaming URL. You find it in Motion Eye in the Video Streaming Section under Usefull URLs by by clicking the Streaming URL link. It should look something like this: http://motioneye:8081 (probably an IP instead of hostname).

emos

reinstalled motioneye on my other r.pi and now im able to view a stream from http://MotionEyeOS:8081, but only from cam 1.
With http://MotionEyeOS:8081/motioneye/2 i still just get cam 1. Get the feeling im not understanding something.

		{
			module: 'MMM-MotionEye',
			position: 'lower_third',
			config: {
				url: "http://192.168.1.200:8081/motioneye/2",
				autoHide: false,
				debug: false
			}
		},

Snille

Hi @emos I’m also using different cameras from the same MotionEye install.
I have my cameras set on different ports like this.
http://MotionEyeOS:8081
http://MotionEyeOS:8082
http://MotionEyeOS:8083
I think that the default way…
Then you have the motiontrigger url like this in MotionEyeOS/Camera (for example):
http://MagicMirror:8080/motioneye/1
http://MagicMirror:8080/motioneye/2
http://MagicMirror:8080/motioneye/3

That’s it. :)

emos

@Snille
My second camera is a remote camera, not a local one on my LAN.
Also http://MagicMirror:8080/motioneye/1 and http://MagicMirror:8080/motioneye/2 is the same livestream. changing from motioneye/1 to motioneye/2 does nothing.

Snille

@emos you need to add it in to MotionEyeOS. So it knows about it. I have 3 cameras in the same way. You can add any “network-camera”.
rtsp://yourcam:port/whatever-format in the “add” dialog in MotionEyeOS. :)

emos

@Snille
Camera is added to MotionEye
Under MotionEyeOS Settings>Video Device>Camera ID the ID is 1 and 2 :/

Snille

@emos Here is one of mine: