mail module problem

[mumblebaj]

@papinel Hi. Your config looks wrong. Can you try changing it to match the below?

{
module: 'email',
position: 'top_left',
header: 'Email'
config: {
	accounts: [
	user: 'xxxxx@gmail.com',
	password: 'xxxxx',
  host: 'imap.gmail.com',
  port: 993,
  tls: true,
  authTimeout: 10000,
  numberOfEmails: 5,
	],
  fade: true
     }
}

[papinel]

Hello sir
could you tell me if I use the right orders? with the terminal
cd ~ / MagicMirror / modules
git clone https://github.com/ronny3050/email-mirror.git
cd email
npm install
because when i install your answer in my config.js
I have my black page with the error message
please create config file
if you this message is ready for your config file probaly contains an error
this message only happens when I install
in the config.js
Thank you very much for your help
papinel

[strawberry 3.141]

@papinel you didnt install it properly, the instructions say git clone https://github.com/ronny3050/email-mirror.git email, either start from scratch or rename the directory email-mirror to email and install the dependencies again.

[mumblebaj]

@papinel I just installed the module and set it up and it works perfect with the setings that I gave you above. As @strawberry-3-141 mentioned, you may want to start from scratch with the module installation.

• git clone https://github.com/ronny3050/email-mirror.git email

• cd email

• npm install

[papinel]

Hello,
I’m sorry, but really sorry I still did not pay the email module for my magicmirror I did everything you told me
first the 3 orders by the terminal

git clone https://github.com/ronny3050/email-mirror.git email
cd email
npm install

return by image

pi @ raspberrypi: ~ $ git clone https://github.com/ronny3050/email-mirror.git emailCloning in ‘email’ …
remote: Enumerating objects: 3, done.
remote: Counting objects: 100% (3/3), done.
remote: Compressing objects: 100% (3/3), done.
remote: Total 63 (delta 0), reused 0 (delta 0), pack-reused 60
Unpacking objects: 100% (63/63), done.
pi @ raspberrypi: ~ $ cd email
pi @ raspberrypi: ~ / email $ npm install
(node: 2831) [DEP0022] DeprecationWarning: os.tmpDir () is deprecated. Use os.tmpdir () instead.
npm WARN package.json email@0.0.1 No repository field.
npm WARN package.json email@0.0.1 No license field.
npm WARN deprecated mailparser@0.6.2: Mailparser versions older than v2.3.0 are deprecated
npm WARN deprecated mimelib@0.3.1: This project is unmaintained
underscore@1.9.1 node_modules / underscore

debug@2.6.9 node_modules / debug
└── ms@2.0.0

imap@0.8.19 node_modules / imap
├── utf7@1.0.2 (semver@5.3.0)
└── readable-stream@1.1.14 (string_decoder@0.10.31, isarray@0.0.1, inherits@2.0.4, core-util-is@1.0.2)

mailparser@0.6.2 node_modules / mailparser
├── mime@1.6.0
├── mimelib@0.3.1 (addressparser@1.0.1)
├── uue@3.1.2 (escape-string-regexp@1.0.5, extend@3.0.2)
└── encoding@0.1.12 (iconv-lite@0.4.24)
pi @ raspberrypi: ~ / email $

as indicate by
 mumblebaj

then I copy in config.js

{
module: ‘email’,
position: ‘top_left’,
header: ‘Email’
config: {
accounts: [
user: ‘xxxxx@gmail.com’,
password: ‘xxxxx’,
  host: ‘imap.gmail.com’,
  port: 993,
  tls: true,
  authTimeout: 10000,
  numberOfEmails: 5,
]
  fade: true
     }
}

as indicated by
mumblebaj

in my home / pi I have an email folder, but when I run pm2 start mm, I find my page that marks me errors, I really do not know or I make a mistake I am to the letter your advice

I really do not know where I am making a mistake I am on the letter your advice
I will stop bothering you with my problem, I will not use the clone mail
I pass you all this through a .odt file
thank you so much
papinel

[sdetweil]

@papinel ALWAYS git clone ONLY with the MagicMirror/modules folder as the current folder, u have them all over the place…

[papinel]

Hello
thank you for your answer, but could develop a little more because I have trouble understanding to execute this module
thank you so much
papinel

[sdetweil]

@papinel when someone tells u to install a module on MagicMirror
you do

cd ~/MagicMirror
cd modules
git clone .....
cd ../config
nano config.js
... add the config info for this module
... save the updated config (ctrl-o to write, ctrl-x to exit nano)
cd ..

either use pm2 to  start MagicMirror again or the installers/mm.sh

in general, you should not need to change anything IN the module folder itself

[papinel]

@sdetweil

[sdetweil]

@papinel yes?