error: Pulling is not possible because you have unmerged files.

DazTypeR

It is called MagicMirror…

pi@raspberrypi:~/MagicMirror

sdetweil

@DazTypeR ok, show me the log ~/upgrade.log or ~/MagicMirror/installers/upgrade.log

sdetweil

the upgrade script does this at the beginning

# if the MagicMirroe folder exists
if [ -d ~/MagicMirror ]; then
	# put the log where the script is located
	logdir=$(dirname $($cmd -f "$0"))
	# if the script was execute from the web
	if [[ $logdir != *"MagicMirror/installers"* ]]; then
		# use the MagicMirror/installers folder
		cd ~/MagicMirror/installers >/dev/null
		logdir=$(pwd)
		cd - >/dev/null
	fi
	logfile=$logdir/upgrade.log

DazTypeR

I can’t find an upgrade.log either in home or in the MagicMirror/installers folder.

sdetweil

@DazTypeR well then

so, when u run it it says

It appears MagicMirror has not been installed on this system  
please run the installer, "raspberry.sh" first

if so, rerun the script like this

bash -c -x  "$(curl -sL https://www.dropbox.com/s/lxzwyzohg61sppu/upgrade-script.sh?dl=0)"

DazTypeR

Hang on, I just ran this command…

(curl -sL https://www.dropbox.com/s/lxzwyzohg61sppu/upgrade-script.sh?dl=0)

Should I have run this command…

bash -c “$(curl -sL https://www.dropbox.com/s/lxzwyzohg61sppu/upgrade-script.sh?dl=0)”

No idea what the bash -c does?

Would this have made a difference?

sdetweil

@DazTypeR yes… if you do it without bash -c, then it downloads the file, and throws it away

if you do the bash -c, then it executes the script (single command -c)

watch out for the double quotes… sometimes those turn into MS word document quotes, which linux shells don’t like

DazTypeR

OK, so its official, I am a numpty :)

This is what I get now when I run it…

the log will be /home/pi/MagicMirror/installers/upgrade.log
doing test run = true
update log will be in /home/pi/MagicMirror/installers/upgrade.log

saving custom.css
upgrading from version 2.9.0 to 2.9.0
fetching latest revisions
bash: line 159: On branch master: command not found
there are 28 local files that are different than the master repo

.eslintrc.json
.gitignore
.travis.yml
CHANGELOG.md
LICENSE.md
installers/raspberry.sh
js/main.js
modules/default/calendar/vendor/ical.js/node-ical.js
modules/default/clock/clock.js
modules/default/currentweather/currentweather.js
modules/default/newsfeed/newsfeed.js
modules/default/updatenotification/node_helper.js
modules/default/updatenotification/updatenotification.js
modules/default/weather/providers/darksky.js
modules/default/weather/providers/openweathermap.js
modules/default/weather/providers/ukmetoffice.js
modules/default/weather/providers/weathergov.js
modules/default/weather/weather.js
modules/default/weather/weatherprovider.js
modules/default/weatherforecast/weatherforecast.js
package.json
run-start.sh
tests/e2e/vendor_spec.js
translations/en.json
translations/es.json
translations/translations.js
vendor/package-lock.json
package-lock.json

any *-lock.json files do not need to be saved
do you want to save these files for later (Y/n)?n
skipping restore for .eslintrc.json, doing test run
skipping restore for .gitignore, doing test run
skipping restore for .travis.yml, doing test run
skipping restore for CHANGELOG.md, doing test run
skipping restore for LICENSE.md, doing test run
skipping restore for installers/raspberry.sh, doing test run
skipping restore for js/main.js, doing test run
skipping restore for modules/default/calendar/vendor/ical.js/node-ical.js, doing test run
skipping restore for modules/default/clock/clock.js, doing test run
skipping restore for modules/default/currentweather/currentweather.js, doing test run
skipping restore for modules/default/newsfeed/newsfeed.js, doing test run
skipping restore for modules/default/updatenotification/node_helper.js, doing test run
skipping restore for modules/default/updatenotification/updatenotification.js, doing test run
skipping restore for modules/default/weather/providers/darksky.js, doing test run
skipping restore for modules/default/weather/providers/openweathermap.js, doing test run
skipping restore for modules/default/weather/providers/ukmetoffice.js, doing test run
skipping restore for modules/default/weather/providers/weathergov.js, doing test run
skipping restore for modules/default/weather/weather.js, doing test run
skipping restore for modules/default/weather/weatherprovider.js, doing test run
skipping restore for modules/default/weatherforecast/weatherforecast.js, doing test run
skipping restore for package.json, doing test run
skipping restore for run-start.sh, doing test run
skipping restore for tests/e2e/vendor_spec.js, doing test run
skipping restore for translations/en.json, doing test run
skipping restore for translations/es.json, doing test run
skipping restore for translations/translations.js, doing test run
skipping restore for vendor/package-lock.json, doing test run
skipping restore for package-lock.json, doing test run
processing dependency changes for active modules with package.json files

processing for module MMM-GooglePhotos please wait

skipped processing for MMM-GooglePhotos, doing test run
processing complete for module MMM-GooglePhotos

restoring custom.css

It then put me back to the command line.

sdetweil

@DazTypeR cool,just like it should have… altho… line 159 bothers me

can you run it again without apply, and use the debug flag

bash -c -x "$(curl -sL https://www.dropbox.com/s/lxzwyzohg61sppu/upgrade-script.sh?dl=0)"

you will have to scroll back up in the terminal window, but I’d like to see the few lines above/below the error line 159

thx

DazTypeR

Hope this has everything you need…

echo current branch = master
++ git status
‘On branch master’ ‘Your branch and ‘'‘origin/master’'’ have diverged,’ ‘and have 4 and 76 different commits each, respectively.’ ’ (use “git pull” to merge the remote branch into yours)’ ‘You have unmerged paths.’ ’ (fix conflicts and run “git commit”)’ ’ (use “git merge --abort” to abort the merge)’ ‘Changes to be committed:’ ’ modified: .eslintrc.json’ ’ modified: .gitignore’ ’ modified: .travis.yml’ ’ modified: CHANGELOG.md’ ’ modified: LICENSE.md’ ’ deleted: css/custom.css’ ’ modified: installers/raspberry.sh’ ’ modified: js/main.js’ ’ modified: modules/default/calendar/vendor/ical.js/node-ical.js’ ’ modified: modules/default/clock/clock.js’ ’ modified: modules/default/currentweather/currentweather.js’ ’ modified: modules/default/newsfeed/newsfeed.js’ ’ modified: modules/default/updatenotification/node_helper.js’ ’ modified: modules/default/updatenotification/updatenotification.js’ ’ modified: modules/default/weather/providers/darksky.js’ ’ modified: modules/default/weather/providers/openweathermap.js’ ’ modified: modules/default/weather/providers/ukmetoffice.js’ ’ modified: modules/default/weather/providers/weathergov.js’ ’ modified: modules/default/weather/weather.js’ ’ modified: modules/default/weather/weatherprovider.js’ ’ modified: modules/default/weatherforecast/weatherforecast.js’ ’ modified: package.json’ ’ modified: run-start.sh’ ’ new file: tests/configs/modules/weather/currentweather_default.js’ ’ new file: tests/configs/modules/weather/currentweather_options.js’ ’ new file: tests/configs/modules/weather/currentweather_units.js’ ’ new file: tests/configs/modules/weather/forecastweather_default.js’ ’ new file: tests/configs/modules/weather/forecastweather_options.js’ ’ new file: tests/e2e/modules/mocks/index.js’ ’ new file: tests/e2e/modules/mocks/weather_current.js’ ’ new file: tests/e2e/modules/mocks/weather_forecast.js’ ’ new file: tests/e2e/modules/weather_spec.js’ ’ modified: tests/e2e/vendor_spec.js’ ’ new file: tests/node_modules/webdriverajaxstub/index.js’ ’ modified: translations/en.json’ ’ modified: translations/es.json’ ’ new file: translations/ms-my.json’ ’ modified: translations/translations.js’ ’ new file: untrack-css.sh’ ’ modified: vendor/package-lock.json’ ‘Unmerged paths:’ ’ (use “git add …” to mark resolution)’ ’ both modified: package-lock.json’ ‘Untracked files:’ ’ (use “git add …” to include in what will be committed)’ ’ css/save_custom.css’ ’ installers/dumpactivemodules.js’
bash: line 159: On branch master: command not found
++ git status
++ grep modified
++ awk -F: ‘{print $2}’
diffs=’ .eslintrc.json
.gitignore
.travis.yml
CHANGELOG.md
LICENSE.md
installers/raspberry.sh
js/main.js
modules/default/calendar/vendor/ical.js/node-ical.js

sdetweil

@DazTypeR cool, can u try that one more time (without apply) to see if I fixed the line 159 problem

DazTypeR

Just ran it again without the extra logging and a block of the output shows this…

saving custom.css
upgrading from version 2.9.0 to 2.9.0
fetching latest revisions
bash: line 159: On branch master: command not found
there are 28 local files that are different than the master repo

sdetweil

@DazTypeR can I beg one more try?

DazTypeR

saving custom.css
upgrading from version 2.9.0 to 2.9.0
fetching latest revisions
bash: line 154: [: missing `]’
MagicMirror git fetch failed
restoring custom.css

sdetweil

@DazTypeR one last time

DazTypeR

Nearly…

saving custom.css
upgrading from version 2.9.0 to 2.9.0
fetching latest revisions
bash: line 161: On branch master: command not found
there are 28 local files that are different than the master repo

sdetweil

@DazTypeR ok, last time… hard to see the side effects

$(git status 2>&1) >>$logfile

that means execute the git status command , and THEN execute the results of THAT , and pass THOSE results to the log

what I wanted was

git status 2>&1 >>$logfile

exec the git status command, and pass ITS results to the log

DazTypeR

OK nice one, that has come back with no errors or anything. :)

Guessing I am correct in replying N to the question regarding lock.json files needed to be saved, I have no idea if I need them or not - lol?

sdetweil

@DazTypeR u should have seen a message

	any *-lock.json files do not need to be saved

DazTypeR

Of course, sorry, my bad, I did read that.

So am I OK to run this now with the apply option and it should update me to 2.9.0?

Also, on the slim chance this mucks up, I backed up my SD card prioe to doing all this, guess I will be OK to just reflash the card with that backup image?