Read the statement by Michael Teeuw here.
Which modules with Home Assistant currently work?
-
I am trying to use this:
but I am having the following problem :(:
https://forum.magicmirror.builders/topic/11972/mmm-homeassistant-sensors-erro
-
You are using:
https://github.com/leinich/MMM-homeassistant-sensorsI said this one works:
-
I tried it, I was unsuccessful. I have no net at the moment. (Problems with a Supplier) When I return, I will try this module again. Hope it works. I will post here.
-
I am having the following problem with him.
pi@raspberrypi:~/MagicMirror $ ^C pi@raspberrypi:~/MagicMirror $ npm start > magicmirror@2.10.0 start /home/pi/MagicMirror > ./run-start.sh [21:26:31.205] [LOG] Starting MagicMirror: v2.10.0 [21:26:31.239] [LOG] Loading config ... [21:26:31.258] [LOG] Loading module helpers ... [21:26:31.265] [LOG] No helper found for module: alert. [21:26:31.449] [LOG] Initializing new module helper ... [21:26:31.452] [LOG] Module helper loaded: updatenotification [21:26:31.457] [LOG] No helper found for module: clock. [21:26:32.663] [LOG] Initializing new module helper ... [21:26:32.665] [LOG] Module helper loaded: MMM-Screencast [21:26:34.035] [LOG] Initializing new module helper ... [21:26:34.037] [LOG] Module helper loaded: calendar [21:26:34.039] [LOG] No helper found for module: compliments. [21:26:35.266] [LOG] Initializing new module helper ... [21:26:35.268] [LOG] Module helper loaded: MMM-DarkSkyForecast [21:26:35.410] [LOG] Initializing new module helper ... [21:26:35.412] [LOG] Module helper loaded: newsfeed [21:26:35.524] [LOG] Initializing new module helper ... [21:26:35.526] [LOG] Module helper loaded: MMM-HASS [21:26:35.529] [LOG] All module helpers loaded. [21:26:35.534] [LOG] Starting server on port 8080 ... [21:26:35.643] [LOG] Server started ... [21:26:35.649] [LOG] Connecting socket for: updatenotification [21:26:35.654] [LOG] Connecting socket for: MMM-Screencast [21:26:35.659] [LOG] Connecting socket for: calendar [21:26:35.663] [LOG] Starting node helper for: calendar [21:26:35.669] [LOG] Connecting socket for: MMM-DarkSkyForecast [21:26:35.675] [LOG] ====================== Starting node_helper for module [MMM-DarkSkyForecast] [21:26:35.681] [LOG] Connecting socket for: newsfeed [21:26:35.686] [LOG] Starting module: newsfeed [21:26:35.689] [LOG] Connecting socket for: MMM-HASS [21:26:35.693] [LOG] Sockets connected & modules started ... [21:26:35.696] [LOG] Ready to go! Please point your browser to: http://localhost:8080 Starting chromium browser now, have patience, it takes a minute --disable-quic --enable-tcp-fast-open --ppapi-flash-path=/usr/lib/chromium-browser/libpepflashplayer.so --ppapi-flash-args=enable_stagevideo_auto=0 --ppapi-flash-version= events.js:174 throw er; // Unhandled 'error' event ^ Error [ERR_STREAM_DESTROYED]: Cannot call write after a stream was destroyed at doWrite (_stream_writable.js:411:19) at writeOrBuffer (_stream_writable.js:399:5) at Socket.Writable.write (_stream_writable.js:299:11) at Console.con.(anonymous function) [as log] (/home/pi/MagicMirror/node_modules/console-stamp/main.js:150:46) at process.<anonymous> (/home/pi/MagicMirror/js/app.js:40:10) at process.emit (events.js:198:13) at process._fatalException (internal/bootstrap/node.js:497:27) ^C pi@raspberrypi:~/MagicMirror $load MM, but all modules have msg of loading …
NOTE: I was missing. Because I was without internet for 05 days.
-
what prevents you to prepare a dedicated hass lovelace tab and display that with module smartwebdisplay?
-
@dvbit said in Which modules with Home Assistant currently work?:
smartwebdisplay
I don’t know this module (smartwebdisplay). And I already have a lovelace on my tablet.
-
@cyberphox said in Which modules with Home Assistant currently work?:
You are using:
https://github.com/leinich/MMM-homeassistant-sensorsI said this one works:
It’s not working either.
https://forum.magicmirror.builders/topic/12014/erro-mmm-hass/4
-
@iorifly What is not working? Your MagicMirror itself?
Or can you just not add this module?Does your Mirror work fine without this module loaded?
-
@cyberphox his problem in unrelated to module. I am debugging
-
@sdetweil I figured it might not be!
Thanks!!! You rock as always -
Yes, my mirror works perfectly without the module.
I have some topics here. look at my problems:
https://forum.magicmirror.builders/topic/12014/erro-mmm-hass/4
-
@iorifly fix reported in other topic
-
With the help of @sdetweil , I was able to solve problems with MM.
Now I am having trouble accessing HA with MMM-HASS.
If anyone can help I will be happy.
My HA configuration looks like this configuration.yam:
homeassistant: whitelist_external_dirs: - /tmp - /config/temp/ auth_providers: - type: legacy_api_password api_password: "juere3027" - type: trusted_networks trusted_networks: - 192.168.1.0/24 - 127.0.0.1 - ::1 allow_bypass_login: true - type: homeassistantconfig.js
{ module: "MMM-HASS", position: "middle_center", config: { host: "192.168.1.158", port: "8123", apipassword: "juere3027", hassiotoken: true, https: false, devices: [ { deviceLabel: "Quintal", deviceReadings: [ { sensor: "sensor.caixa_dagua", icon: "mdi:waves", suffix: "%"} ] } ] } },The mirror executes loads the other modules, but HASS does not load. I have the following output:
> magicmirror@2.10.1 start /home/pi/MagicMirror > ./run-start.sh [22:26:04.896] [LOG] Starting MagicMirror: v2.10.1 [22:26:04.931] [LOG] Loading config ... [22:26:04.951] [LOG] Loading module helpers ... [22:26:04.959] [LOG] No helper found for module: alert. [22:26:05.139] [LOG] Initializing new module helper ... [22:26:05.146] [LOG] Module helper loaded: updatenotification [22:26:05.151] [LOG] No helper found for module: clock. [22:26:06.647] [LOG] Initializing new module helper ... [22:26:06.650] [LOG] Module helper loaded: calendar [22:26:06.653] [LOG] No helper found for module: compliments. [22:26:07.888] [LOG] Initializing new module helper ... [22:26:07.890] [LOG] Module helper loaded: MMM-DarkSkyForecast [22:26:08.030] [LOG] Initializing new module helper ... [22:26:08.035] [LOG] Module helper loaded: newsfeed [22:26:08.129] [LOG] Initializing new module helper ... [22:26:08.133] [LOG] Module helper loaded: MMM-HASS [22:26:08.137] [LOG] All module helpers loaded. [22:26:08.143] [LOG] Starting server on port 8080 ... [22:26:08.251] [LOG] Server started ... [22:26:08.256] [LOG] Connecting socket for: updatenotification [22:26:08.261] [LOG] Connecting socket for: calendar [22:26:08.265] [LOG] Starting node helper for: calendar [22:26:08.268] [LOG] Connecting socket for: MMM-DarkSkyForecast [22:26:08.271] [LOG] ====================== Starting node_helper for module [MMM-DarkSkyForecast] [22:26:08.275] [LOG] Connecting socket for: newsfeed [22:26:08.278] [LOG] Starting module: newsfeed [22:26:08.282] [LOG] Connecting socket for: MMM-HASS [22:26:08.288] [LOG] Sockets connected & modules started ... [22:26:08.293] [LOG] Ready to go! Please point your browser to: http://localhost:8080 Starting chromium browser now, have patience, it takes a minute [22:26:08.451] [ERROR] { Error: listen EADDRINUSE: address already in use 127.0.0.1:8080 at Server.setupListenHandle [as _listen2] (net.js:1280:14) at listenInCluster (net.js:1328:12) at GetAddrInfoReqWrap.doListen [as callback] (net.js:1461:7) at GetAddrInfoReqWrap.onlookup [as oncomplete] (dns.js:61:10) code: 'EADDRINUSE', errno: 'EADDRINUSE', syscall: 'listen', address: '127.0.0.1', port: 8080 } [22:26:08.444] [LOG] Whoops! There was an uncaught exception... [22:26:08.510] [LOG] MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection? [22:26:08.512] [LOG] If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues --disable-quic --enable-tcp-fast-open --ppapi-flash-path=/usr/lib/chromium-browser/libpepflashplayer.so --ppapi-flash-args=enable_stagevideo_auto=0 --ppapi-flash-version= [22:26:22.272] [LOG] Use existing news fetcher for url: https://noticias.r7.com/rio-de-janeiro/feed.xml [22:26:22.303] [LOG] Request URL: http://192.168.1.158:8123/api/states/sensor.caixa_dagua?api_password=juere3027 [22:26:22.388] [LOG] { undefined: undefined, label: 'Quintal' } -
I see that the module tries to connect to the Home assistant.
-
@iorifly said in Which modules with Home Assistant currently work?:
EADDRINUSE
U already have some application using that port, and are trying to start another
-
I don’t know what it would be. It is not related to MMM-HASS.
Even with a simple config.js I have this msg. I think I should restart my raspberry.
-
@iorifly does mm start on boot?
-
Do not. I restarted and the msg stopped. Now I’m fighting with MMM-HASS.I take back what I said. He did give me more information!
The mistake I have is in the development of the module. The error is in the connection of the module to the HA system.
I can’t do anything but wait for the developer’s announcement.[14:23:57.773] [LOG] Create new news fetcher for url: https://noticias.r7.com/rio-de-janeiro/feed.xml - Interval: 300000 [14:23:57.895] [LOG] { deviceLabel: 'Quintal', deviceReadings: [ { sensor: 'sensor.caixa_dagua', icon: 'wi wi-thermometer', suffix: '%' } ] } [14:23:57.919] [LOG] 192.168.1.158:8123/api/states/sensor.caixa_dagua?api_password=juere3027 [14:23:57.920] [LOG] Request URL: http://192.168.1.158:8123/api/states/sensor.caixa_dagua?api_password=juere3027 [14:23:58.215] [ERROR] (node:18860) [DEP0005] DeprecationWarning: Buffer() is deprecated due to security and usability issues. Please use the Buffer.alloc(), Buffer.allocUnsafe(), or Buffer.from() methods instead. [14:23:58.440] [LOG] null [14:23:58.443] [LOG] 401: Unauthorized [14:23:58.445] [LOG] { undefined: undefined, label: 'Quintal' } [14:23:59.415] [LOG] Refreshed access token because it has expired. Expired at: 14:23:57 now is: 14:23:59 [14:23:59.450] [LOG] Refreshed access token because it has expired. Expired at: 15:23:59 now is: 14:23:59 [14:23:59.487] [LOG] Refreshed access token because it has expired. Expired at: 15:23:59 now is: 14:23:59 pi@raspberrypi:~/MagicMirror $ -
I tried this option but also to no avail.
-
@iorifly to dvbit point you could just use fullpageos if you just want to display a Lovelace tab…
Also, I have had homeassistany sensors working recently…if you want to give some more detail of what you’ve done and what the problem is. And share you relevant code I can try to help…
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login