Which modules with Home Assistant currently work?

iorifly

I tried it, I was unsuccessful. I have no net at the moment. (Problems with a Supplier) When I return, I will try this module again. Hope it works. I will post here.

iorifly

I am having the following problem with him.

pi@raspberrypi:~/MagicMirror $ ^C
pi@raspberrypi:~/MagicMirror $ npm start

> magicmirror@2.10.0 start /home/pi/MagicMirror
> ./run-start.sh

[21:26:31.205] [LOG] Starting MagicMirror: v2.10.0
[21:26:31.239] [LOG] Loading config ...
[21:26:31.258] [LOG] Loading module helpers ...
[21:26:31.265] [LOG] No helper found for module: alert.
[21:26:31.449] [LOG] Initializing new module helper ...
[21:26:31.452] [LOG] Module helper loaded: updatenotification
[21:26:31.457] [LOG] No helper found for module: clock.
[21:26:32.663] [LOG] Initializing new module helper ...
[21:26:32.665] [LOG] Module helper loaded: MMM-Screencast
[21:26:34.035] [LOG] Initializing new module helper ...
[21:26:34.037] [LOG] Module helper loaded: calendar
[21:26:34.039] [LOG] No helper found for module: compliments.
[21:26:35.266] [LOG] Initializing new module helper ...
[21:26:35.268] [LOG] Module helper loaded: MMM-DarkSkyForecast
[21:26:35.410] [LOG] Initializing new module helper ...
[21:26:35.412] [LOG] Module helper loaded: newsfeed
[21:26:35.524] [LOG] Initializing new module helper ...
[21:26:35.526] [LOG] Module helper loaded: MMM-HASS
[21:26:35.529] [LOG] All module helpers loaded.
[21:26:35.534] [LOG] Starting server on port 8080 ...
[21:26:35.643] [LOG] Server started ...
[21:26:35.649] [LOG] Connecting socket for: updatenotification
[21:26:35.654] [LOG] Connecting socket for: MMM-Screencast
[21:26:35.659] [LOG] Connecting socket for: calendar
[21:26:35.663] [LOG] Starting node helper for: calendar
[21:26:35.669] [LOG] Connecting socket for: MMM-DarkSkyForecast
[21:26:35.675] [LOG] ====================== Starting node_helper for module [MMM-DarkSkyForecast]
[21:26:35.681] [LOG] Connecting socket for: newsfeed
[21:26:35.686] [LOG] Starting module: newsfeed
[21:26:35.689] [LOG] Connecting socket for: MMM-HASS
[21:26:35.693] [LOG] Sockets connected & modules started ...
[21:26:35.696] [LOG]
Ready to go! Please point your browser to: http://localhost:8080
Starting chromium browser now, have patience, it takes a minute
 --disable-quic --enable-tcp-fast-open --ppapi-flash-path=/usr/lib/chromium-browser/libpepflashplayer.so --ppapi-flash-args=enable_stagevideo_auto=0 --ppapi-flash-version=
events.js:174
      throw er; // Unhandled 'error' event
      ^

Error [ERR_STREAM_DESTROYED]: Cannot call write after a stream was destroyed
    at doWrite (_stream_writable.js:411:19)
    at writeOrBuffer (_stream_writable.js:399:5)
    at Socket.Writable.write (_stream_writable.js:299:11)
    at Console.con.(anonymous function) [as log] (/home/pi/MagicMirror/node_modules/console-stamp/main.js:150:46)
    at process.<anonymous> (/home/pi/MagicMirror/js/app.js:40:10)
    at process.emit (events.js:198:13)
    at process._fatalException (internal/bootstrap/node.js:497:27)
^C
pi@raspberrypi:~/MagicMirror $

load MM, but all modules have msg of loading …

NOTE: I was missing. Because I was without internet for 05 days.

dvbit

what prevents you to prepare a dedicated hass lovelace tab and display that with module smartwebdisplay?

iorifly

@dvbit said in Which modules with Home Assistant currently work?:

smartwebdisplay

I don’t know this module (smartwebdisplay). And I already have a lovelace on my tablet.

iorifly

@cyberphox said in Which modules with Home Assistant currently work?:

You are using:
https://github.com/leinich/MMM-homeassistant-sensors

I said this one works:

https://github.com/aserramonner/MMM-HASS

It’s not working either.

https://forum.magicmirror.builders/topic/12014/erro-mmm-hass/4

cyberphox

@iorifly What is not working? Your MagicMirror itself?
Or can you just not add this module?

Does your Mirror work fine without this module loaded?

sdetweil

@cyberphox his problem in unrelated to module. I am debugging

cyberphox

@sdetweil I figured it might not be!
Thanks!!! You rock as always

iorifly

@cyberphox

Yes, my mirror works perfectly without the module.

I have some topics here. look at my problems:

https://forum.magicmirror.builders/topic/12014/erro-mmm-hass/4

sdetweil

@iorifly fix reported in other topic

iorifly

With the help of @sdetweil , I was able to solve problems with MM.

Now I am having trouble accessing HA with MMM-HASS.

If anyone can help I will be happy.

alt text

My HA configuration looks like this configuration.yam:

homeassistant:
  whitelist_external_dirs:
    - /tmp
    - /config/temp/
  auth_providers:
      - type: legacy_api_password
        api_password: "juere3027"
  
      - type: trusted_networks
        trusted_networks:
          - 192.168.1.0/24
          - 127.0.0.1
          - ::1
        allow_bypass_login: true
      - type: homeassistant

config.js

{
                module: "MMM-HASS",
                position: "middle_center",
                config: {
                        host: "192.168.1.158",
                        port: "8123",
                        apipassword: "juere3027",
                        hassiotoken: true,
                        https: false,
                        devices: [
                        { deviceLabel: "Quintal",
                                deviceReadings: [
                                { sensor: "sensor.caixa_dagua", icon: "mdi:waves", suffix: "%"}
                                
                                ]
                          }
                        
                               ]
                        }       
        
             },

The mirror executes loads the other modules, but HASS does not load. I have the following output:

> magicmirror@2.10.1 start /home/pi/MagicMirror
> ./run-start.sh

[22:26:04.896] [LOG] Starting MagicMirror: v2.10.1
[22:26:04.931] [LOG] Loading config ...
[22:26:04.951] [LOG] Loading module helpers ...
[22:26:04.959] [LOG] No helper found for module: alert.
[22:26:05.139] [LOG] Initializing new module helper ...
[22:26:05.146] [LOG] Module helper loaded: updatenotification
[22:26:05.151] [LOG] No helper found for module: clock.
[22:26:06.647] [LOG] Initializing new module helper ...
[22:26:06.650] [LOG] Module helper loaded: calendar
[22:26:06.653] [LOG] No helper found for module: compliments.
[22:26:07.888] [LOG] Initializing new module helper ...
[22:26:07.890] [LOG] Module helper loaded: MMM-DarkSkyForecast
[22:26:08.030] [LOG] Initializing new module helper ...
[22:26:08.035] [LOG] Module helper loaded: newsfeed
[22:26:08.129] [LOG] Initializing new module helper ...
[22:26:08.133] [LOG] Module helper loaded: MMM-HASS
[22:26:08.137] [LOG] All module helpers loaded.
[22:26:08.143] [LOG] Starting server on port 8080 ...
[22:26:08.251] [LOG] Server started ...
[22:26:08.256] [LOG] Connecting socket for: updatenotification
[22:26:08.261] [LOG] Connecting socket for: calendar
[22:26:08.265] [LOG] Starting node helper for: calendar
[22:26:08.268] [LOG] Connecting socket for: MMM-DarkSkyForecast
[22:26:08.271] [LOG] ====================== Starting node_helper for module [MMM-DarkSkyForecast]
[22:26:08.275] [LOG] Connecting socket for: newsfeed
[22:26:08.278] [LOG] Starting module: newsfeed
[22:26:08.282] [LOG] Connecting socket for: MMM-HASS
[22:26:08.288] [LOG] Sockets connected & modules started ...
[22:26:08.293] [LOG]
Ready to go! Please point your browser to: http://localhost:8080
Starting chromium browser now, have patience, it takes a minute
[22:26:08.451] [ERROR]  { Error: listen EADDRINUSE: address already in use 127.0.0.1:8080
    at Server.setupListenHandle [as _listen2] (net.js:1280:14)
    at listenInCluster (net.js:1328:12)
    at GetAddrInfoReqWrap.doListen [as callback] (net.js:1461:7)
    at GetAddrInfoReqWrap.onlookup [as oncomplete] (dns.js:61:10)
  code: 'EADDRINUSE',
  errno: 'EADDRINUSE',
  syscall: 'listen',
  address: '127.0.0.1',
  port: 8080 }
[22:26:08.444] [LOG]    Whoops! There was an uncaught exception...
[22:26:08.510] [LOG]    MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
[22:26:08.512] [LOG]    If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues
 --disable-quic --enable-tcp-fast-open --ppapi-flash-path=/usr/lib/chromium-browser/libpepflashplayer.so --ppapi-flash-args=enable_stagevideo_auto=0 --ppapi-flash-version=
[22:26:22.272] [LOG]    Use existing news fetcher for url: https://noticias.r7.com/rio-de-janeiro/feed.xml
[22:26:22.303] [LOG]    Request URL: http://192.168.1.158:8123/api/states/sensor.caixa_dagua?api_password=juere3027
[22:26:22.388] [LOG]    { undefined: undefined, label: 'Quintal' }

iorifly

I see that the module tries to connect to the Home assistant.

https://imgur.com/oHjP479

sdetweil

@iorifly said in Which modules with Home Assistant currently work?:

EADDRINUSE

U already have some application using that port, and are trying to start another

iorifly

I don’t know what it would be. It is not related to MMM-HASS.

Even with a simple config.js I have this msg. I think I should restart my raspberry.

sdetweil

@iorifly does mm start on boot?

iorifly

~~Do not. I restarted and the msg stopped. Now I’m fighting with MMM-HASS.~~

I take back what I said. He did give me more information!

The mistake I have is in the development of the module. The error is in the connection of the module to the HA system.

I can’t do anything but wait for the developer’s announcement.

[14:23:57.773] [LOG]    Create new news fetcher for url: https://noticias.r7.com/rio-de-janeiro/feed.xml - Interval: 300000
[14:23:57.895] [LOG]    { deviceLabel: 'Quintal',
  deviceReadings:
   [ { sensor: 'sensor.caixa_dagua',
       icon: 'wi wi-thermometer',
       suffix: '%' } ] }
[14:23:57.919] [LOG]    192.168.1.158:8123/api/states/sensor.caixa_dagua?api_password=juere3027
[14:23:57.920] [LOG]    Request URL: http://192.168.1.158:8123/api/states/sensor.caixa_dagua?api_password=juere3027
[14:23:58.215] [ERROR]  (node:18860) [DEP0005] DeprecationWarning: Buffer() is deprecated due to security and usability issues. Please use the Buffer.alloc(), Buffer.allocUnsafe(), or Buffer.from() methods instead.
[14:23:58.440] [LOG]    null
[14:23:58.443] [LOG]    401: Unauthorized
[14:23:58.445] [LOG]    { undefined: undefined, label: 'Quintal' }
[14:23:59.415] [LOG]    Refreshed access token because it has expired. Expired at: 14:23:57 now is: 14:23:59
[14:23:59.450] [LOG]    Refreshed access token because it has expired. Expired at: 15:23:59 now is: 14:23:59
[14:23:59.487] [LOG]    Refreshed access token because it has expired. Expired at: 15:23:59 now is: 14:23:59
pi@raspberrypi:~/MagicMirror $

iorifly

I tried this option but also to no avail.

https://github.com/aserramonner/MMM-HASS/pull/13

darbos

@iorifly to dvbit point you could just use fullpageos if you just want to display a Lovelace tab…

Also, I have had homeassistany sensors working recently…if you want to give some more detail of what you’ve done and what the problem is. And share you relevant code I can try to help…

iorifly

@darbos

I would love to know how to display only one lovelace tab. But still it would be the whole screen or I can go down the screen to show only what I want.

I have my problem report here too:

https://community.home-assistant.io/t/magic-mirror/8443/59

what do you need ? I can pass everything !!!

dvbit

You can use a custom card called custom header to minimize the top and right bar . also having it happen just for the mm through user agent recognition