MagicMirror Pimatic (Home Automation) Dashboard

[Peter]

pi@magicrpi:~/MagicMirror/modules/MMM-Pimatic $ npm install
npm WARN enoent ENOENT: no such file or directory, open '/home/pi/MagicMirror/modules/package.json'
npm WARN enoent ENOENT: no such file or directory, open '/home/pi/MagicMirror/modules/node_modules/node_helper/package.json'
npm WARN modules No description
npm WARN modules No repository field.
npm WARN modules No README data
npm WARN modules No license field.

And I have no idea what to do (how to install) socket.io-client.
Peter

[Mr.Sponti]

@Peter , you can ignore these Warnings, but you need to install the socket.io-client modul:

cd  ~/MagicMirror/modules/MMM-Pimatic
npm install socket.io-client

[ganther]

Hello,

I also installed your great module to observe the pimatic-sensor data on my MM.
The normal systemsensor-temps are perfectly shown. But how can I get the values of my dht22-sensor because the class dhtsensor has no attributes. It delivers 2 values (Temp and humidity).

Is there any solution?

Thanks a lot.
Sandy

[Mr.Sponti]

@ganther said in MagicMirror Pimatic (Home Automation) Dashboard:

dhtsensor

Hi Sandy, how is your dht22-sensor connected? Is the sensor direct connected to the Rasperry GPIO pins and you use the plugin “dht-sensors”?
What shows up for the sensor if you create a listing of “variables” from your pimatic menu?

[ganther]

@Mr.Sponti
Thanks for your response.
Yes, i use the dht-sensors plugin. It is directly connected to GPIO-Pin22

Here is a Screenshot of a part of the device-config. Perhaps it‘s helpful.

Thank you
Sandy

[ganther]

And the second menu area:

[ganther]

Oh sorry, I didn‘t recognize the variables menue entry before oO🤦‍♂️

It shows $dht22.temperature and .humidity

I will try these ones in config.

[ganther]

Yes, Temperatur is shown.
But with 13 digits behind ‚.‘ just like 24.1234567890123

Is there a way to cut after 1 or 2 digits behind ‚.‘?
And a way to select another unit (% instead of degree) or do i have to move it to the notification board?

Thanks again
Sandy

[Mr.Sponti]

Rounding of the values is not a big issue as there is a method '.toFixed(2) ’ available. At the moment the unit specified in the config file is assigned to all values in the table. To implement the value rounding and a individual unit for every value I need to enhance the code. I will put it on my action list for the next version.

[ganther]

@Mr.Sponti said in MagicMirror Pimatic (Home Automation) Dashboard:

Rounding of the values is not a big issue as there is a method '.toFixed(2) ’ available. At the moment the unit specified in the config file is assigned to all values in the table. To implement the value rounding and a individual unit for every value I need to enhance the code. I will put it on my action list for the next version.

Thank you very much!