Extension of MMM-Tools (Bugsounet)

MiPraSo

I would like to extend the module.
I would like to display both IP addresses.
What I have already done:

Changed the cmdline.txt to show a wlan0 as interface name again (ifconfig)

In node-helper.js I added the following:

IP: "ip -4 a show lo | grep inet",
IP_LAN: "ip -4 a show eth0 | grep inet"
IP_WLAN: "ip -4 a show wlan0 | grep inet"

Implemented these two functions:

 getIP_WLAN : function() {
    exec (this.scripts['IP_WLAN'], (err, stdout, stderr)=>{
      if (err == zero) {
        this.WLAN = stdout.trim().match(/\b\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}\b/)
      }
    })
  },

  getIP_LAN : function() {
    exec (this.scripts['IP_LAN'], (err, stdout, stderr)=>{
      if (err == zero) {
        var matched = stdout.trim().match(/\b\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}\b/)
        this.IP_LAN = (matched) ? matched[0] : "Unknown"
      }
    })
  },

Unfortunately, I did not get any further, I can’t manage to output the values. My goal is what is written there:

IP       eth0: 192.168.1.xx, wlan0: 192.168.1.yy

Since I have no experience with JS, I am now stucking here…
Is anyone interested in helping me with this?

Greetings

sdetweil

@MiPraSo in mm, the node_helper is the data ( ip addresses) collector,
and the modulename.js is the data presenter. See the getDom() routine which builds the html content to be displayed

A Former User

Hi, thanks for you feedback ;)

don’t worry about this !
I will start the MMM-Tools v2 in a few days !
I will start this module with new code and a new tool without sh script :)
of course it will have news functionally like yours

MiPraSo

Hi @Bugsounet,
I’ll be patient and I’ll wait…
Let me be your alpha and beta tester. :lady_beetle:

Thanks for your feedback.

A Former User

In the last update I add uptime and uptime Record

now, I be back for some news !

I changed the code by the new library without sh / bash script and here is the performance:

[2020-08-11 01:32:07.710] [LOG]    CPU Usage 9
[2020-08-11 01:32:07.724] [LOG]    CPU Temp: 44
[2020-08-11 01:32:07.726] [LOG]    Mem Total 7934
[2020-08-11 01:32:07.726] [LOG]    Mem used 3212
[2020-08-11 01:32:07.726] [LOG]    Mem % 40

so very good react ;)

now i will try:

display info about / partition and /home partition (choice of user of course)
display ALL used ip adress (and trafic if you want)
maybe determinate % of cpu used with MagicMirror (maybe because not tested)
what 'is the users connected
display RPI version

Sure, all info will not displayed in config by default. You can enable (or disable) it as you want ;)

After, the question is :
I keep the current visual or I change !?

A Former User

Hi !

MMM-Tools fetch all info needed : (tested on my dev platform and not definitive)

[2020-08-13 17:55:13.191] [LOG]    Send this Status: {
  OS: 'Debian 10 (buster)',
  SYS: 'Core™ i5-3350P',
  NETWORK: [
    enp3s0: { ip: '192.168.0.17', type: 'wired', default: true },
    wlx98ded00d0521: { ip: '192.168.0.193', type: 'wireless', default: false }
  ],
  MEMORY: [ total: '7934Mb', used: '2613Mb', percent: '40' ],
  STORAGE: [
    '/': { size: '39.98Go', used: '10.33Go', use: 25.84 },
    '/home': { size: '383.49Go', used: '53.64Go', use: 13.99 },
    '/boot/efi': { size: '96.00Mo', used: '31.57Mo', use: 32.89 },
    '/media/Data': { size: '540.76Go', used: '96.68Go', use: 17.88 }
  ],
  CPU: [ temp: '44.0', usage: '23' ],
  UPTIME: '1 jour 17 heures 25 minutes',
  RECORD: '27 jours 18 heures 49 minutes',
  SCREEN_STATUS: 'OFF'
}

of course SYS info is the result of CPU type or RPI type
exemple for a RPI 4:

SYS: 'Raspberry Pi 4 Model B Rev 1.1'

RPI 3:

SYS: 'Raspberry Pi 3 Model B Plus Rev 1.3'

Now, i will do a new visual for displaying all information received ;)
Note: If somebody need other information to display, just tell me :)

A Former User

This is current information and visual fetched in my dev branch

Raspberry:

My dev platform:

Of course, you can hide, if you want, not needed partitions info.
if you have multiple network, the default network is represented with a star

You can try the dev branch with this command:

(assumed that v1 is installed)

cd ~/MagicMirror/modules/MMM-Tools
git checkout -f dev
npm install

to return to v1:

cd ~/MagicMirror/modules/MMM-Tools
git checkout -f master
npm install

do not hesitate to give me feedback.
if any other informations is missing, just tell me :)

MiPraSo

@Bugsounet

Looks good…
Here’s some issues:

Is there an example for the config.cfg?
The alignment is now right again, in the old version I was able to adjust it to the left?
How do I get the display wider, in the old version I could adjust it?
How can I change the label, from UPTIME to Laufzeit or *LAN to eth0?
And what are “Go” and “Mo” which should be about “GB” and “MB”?

Regards,

Michael

A Former User

I force all value to display, I don’t really add some feature to personalize actually
you can’t actually config:
recordUptime: true, to record and display : record uptime
partitionExclude : [], fo exclude partition to display
sample: partitionExclude : [ "/boot" ], if you don’t want display info about /boot partition
I have to ajust css code
not coded yet (personal feature will be coded in the end)
I’m trying to do a translation file (wait a while ;) )
just tell me what value to translate (and translation needed)
For Lan to eth0. I have fetch the name info by not displayed actually (because in my dev the WLAN interface have a very very long name)
so i have planned a feature for name choice displaying (native or WLAN/LAN)
I will do dual code (actually it’s a test)

I will be back to you when i have done some totentials change

A Former User

Yeah !

I have just commit some change on dev branch
I add the new configuration part in Readme
I correct some css code
I correct unit Go to Gb
added translation file (de too)
actually supported : en, fr, de (thx to @lxne), id (80% done) and sv (thx to @el97 from github), it (thx to @MrDondoT from github)
I can add other language just help me to do the translate file
added telegramBot command /status

MagicMirror:

TelegamBot: