[Electron] display en screen after installing MMM-PIR-Sensor

sdetweil

@RIKKO14 that is dev window open on forum page, not MM page

RIKKO14

that’s te problem…
you ask me to do ctrl+shift+i on the mirror keyboard :
but the screen is powered off so nothing displayed, i don’t know if it’s displayed something, I can’t see it…
or i don’t anderstand to acceed MM page with my pc, I have only this :
Sans titre.png

sdetweil

@RIKKO14 edit the config.js on the mirror

change address and ipWhitelist like this

address:"0.0.0.0",
ipWhitelist:[],

restart mm…

now on your pc you can do
http://pi_ip:8080

and then u can open the dev window on that page

i thought you said earlier you had removed the command to make your mirror screen turn off
so you know which code is issuing the command… tell where that was

RIKKO14

But I have only acces to my MM with SSH, so how to edit the config.js on the mirror with ssh ?

sdetweil

@RIKKO14 on the ssh terminal, (its a terminal window, same as works on pi)

cd MagicMirror/config
nano config.js

fix the text (move the cursor with the arrow keys and type and backspace
then ctrl-o to write the changes back out and ctrl -x to exit nano
then type pm2 restart 0

for your windows box, get winscp, then u can connect to pi as both terminal window (for commands)
and a file system view, like windows, double click on folder to go in, or file to edit… use your favorite pc editor (I use notepad++_)

RIKKO14

I do this :
Sans titre.png
and type pm2 restart 0, but my screen of MM is steel powered off…

sdetweil

@RIKKO14 now on your PC, open browser to
http://pi_ip:8080

same up address u used for ssh

now see magic mirror

sdetweil

@sdetweil and disable the PIR module in config.js, and manually turn screen back on

I’d this a Pi4. the off command works, the old on command doesn’t. I have seen others fight this but don’t remember any solution

RIKKO14

I reinstalled everything last night except the GA module and had the same problem.
This morning I start all over again with the MMM-PIR module and the [Electron] screen is displayed instead of my MM screen.
My pm2 log indicated that there is a Node.js version pb: I am in version 73 while the require version is version 64.
So I put an issue on the link of this module to request an update of the module with Node.js version 73, hoping that there is only that.
In the meantime I put aside this module and reinstall all the modules for the X time.
my pm2 log :

0|mm       | was compiled against a different Node.js version using
0|mm       | NODE_MODULE_VERSION 64. This version of Node.js requires
0|mm       | NODE_MODULE_VERSION 73. Please try re-compiling or re-installing
0|mm       | the module (for instance, using `npm rebuild` or `npm install`).```


Thank you very much however for all your help and patience.

sdetweil

@RIKKO14 same instructions as post 5 of the topic