MMM-ProfileSwitcher, A Profile/User/Layout Switching Module

tosti007

@Snille Thank you very much :) was about to ask :D

tosti007

@tosti007 said in MMM-ProfileSwitcher, A Profile/User/Layout Switching Module:

I will update the line numbers aswell, thank you! I will let you know when I changed it.

@Snille Updated :) You have to remove only a few lines more and then it should work like before! Also added your translations :) thank you once more

tosti007

@All Hello everybody! Version 2 is out now :D You can set a timer to switch from one profile to another after a certain amount of time! For an explanation on how to configure them check the README. After a feature request of @shashank.

Mar

So i’ve added the MMM-ProfileSwitcher to the config file along with “classes: ‘default xyz’” etc to each module under the config file. With one module having only a class of “PAGE2”.

Using MMM-Buttons i have it successfully pushing a notification saying PAGE2 but nothing is happening on my MM, also all the modules are showing up? When the notification is pushed in the pm2 logs i see all the modules receiving the notification but i dont ever see profileswitcher in that list.

I honestly dont know what im doing wrong, the profileswitcher is loading according to the pm2 logs (with an error) but for instance one of my modules I have a unique class set so it should only be visible for that profile but it still shows up when the mirror loads on the default page.

edit:
Noticed this error on pm2 logs x

0|mm       | ** Message: console message: http://localhost:8080/modules/MMM-ProfileSwitcher//MMM-ProfileSwitcher.js @87: SyntaxError: Unexpected token '>'

Line reads:

self.config.ignoreModules.some((m) => classes.includes(m)) || // Should this module be ignored?

Also same at line 204/108 wondering if it should be an =, >=, or perhaps a < =? It also doesnt seem to like line 205 return statement (but im not sure what this one means).

shashank

@tosti007 Hi, Thanks a Lot, Profile switch timer is working fine, tested the same.

tosti007

@Mar After a helpfull pull request by @Jopyth this line got removed. Try pulling the new changes and let me know if still gives problems! Thank you for letting me know that bug.

@All The module uses lockstrings now! This due to some problems in combination with other modules. Give the README configurables a look if you want to disable this.

Edit: Ugh I just noticed I made a terrible mistake in that line. the => should have been >==. Thanks again!
Edit 2: Double ugh, read it again and it was right.

Mar

@tosti007 Thanks for the updates, still looks like lines 214 & 218 contain the “=>” were these supposed to be switched to >== also?

So just getting those error so far, but still no luck on the switcher. Im really not sure what I’m doing wrong. I’ve simplified my config file to the following to try make it load the default profile and just switch to ‘PAGE2’. But when the MM loads I get both the clock and weather still on the screen.

modules: [
                {
                        module: 'alert',
                },
                {
                        module: "updatenotification",
                        position: "top_bar"
                },
                {
                        module: 'MMM-ProfileSwitcher',
                        config: {
                                // See 'Configuration options' for more information.
                        }
                },
                {
                        module: 'MMM-Buttons',
                        config: {
                        buttons: [
                                {
                                        pin: 5,
                                        name: "power",
                                        shortPress: {
                                                notification: "PROFILE_SWITCH",
                                                payload: {action: "PAGE2"}
                                        }
                                }
                        ]
                        }
                },
                {
                        module: 'clock',
                        classes: 'default',
                        position: 'top_left',
                },
                {
                        module: 'currentweather',
                        classes: 'PAGE2',
                        position: 'top_right',
                        config: {
                                location: '...',
                                locationID: '...',
                                appid: '...'
                        }
                },
        ]

and when i press the button pm2 logs only shows this but nothing happens on the screen.

0|mm       | ** Message: console message: [native code] @0: clock received a module notification: PROFILE_SWITCH from sender: MMM-Buttons

edit: On the main HDMI cable monitor the mirror is showing both modules, but if i go via chrome on my laptop it only shows the clock (but still doesnt switch when pressing the button). The inspector in Chrome shows that its hiding non-default modules…seems like Midori doesnt get to this (but I have no way to check)

strawberry 3.141

@Mar => are big arrow functions from ecmascript6, which is the newest standard of javascript

Mar

@strawberry-3.141 Thanks, I never seem to have had any issues with these before but only on my pi zero. Loading up the latest profile switcher (using my simple 2 module) i get this error relating to that line

0|mm       | ** Message: console message: http://localhost:8080/modules/MMM-ProfileSwitcher//MMM-ProfileSwitcher.js @214: SyntaxError: Unexpected token '>'

But it seems to work via a remote browser (i.e chrome but switching doesnt work) and not the pi’s midori which still shows both modules.

strawberry 3.141

@Mar for me electron is supporting all those es6 features, just heard of that some users had problems with some of my modules with the midori browser