MMM-Domoticz-ext: interact with Domoticz

peterh

Hi

rooms: [
                                    { idx: "17", name: "Status" },  // can only show switch status,, breaks if temp. in room?
                                    //{ idx: "14", name: "Testing" },
                 ],

I have a “room” plan set in Domoticz that contains various virtual devices, if i add a temperature device to it, the list of devices shown in MM stops at that device.

With “mote” (temp & humidity) sensor in the room

With no mote in the room.

Please note: I have used custom css to shrink the members of the room to a more compact left justified list, rather than spread across the whole width of the screen.

regards Peter

goedh452

@peterh

I can have a look at the temp/hum issue. I have several of these sensors myself and they do work in this layout. I would need the JSON-output of the specified device to figure out the problem.

goedh452

@peterh

I tried, but am unable to reproduce your problem. If you would like me to have a look, please post the JSON result for the device “mote”.

peterh

@goedh452

Hi
Sorry for the delayed response.
It appears that the issue occurs when there is no temperature or humidity data in the json output.
the sensor had no data while i was initially testing. After collecting some data it works as expected.
sample json data:

pi@MM-lite:~$ curl "http://10.60.2.252:8080/json.htm?type=devices&rid=196"
{
        "ActTime" : 1623221642,
        "AstrTwilightEnd" : "18:46",
        "AstrTwilightStart" : "05:45",
        "CivTwilightEnd" : "17:46",
        "CivTwilightStart" : "06:45",
        "DayLength" : "10:07",
        "NautTwilightEnd" : "18:16",
        "NautTwilightStart" : "06:15",
        "ServerTime" : "2021-06-09 14:54:02",
        "SunAtSouth" : "12:16",
        "Sunrise" : "07:12",
        "Sunset" : "17:19",
        "app_version" : "2020.2 (build 12917)",
        "result" :
        [
                {
                        "AddjMulti" : 1.0,
                        "AddjMulti2" : 1.0,
                        "AddjValue" : 0.0,
                        "AddjValue2" : 0.0,
                        "BatteryLevel" : 255,
                        "CustomImage" : 0,
                        "Data" : "0, 27.0",
                        "Description" : "temperature and humidity in my office. polled from mqtt",
                        "Favorite" : 0,
                        "HardwareDisabled" : false,
                        "HardwareID" : 3,
                        "HardwareName" : "virtual hardware",
                        "HardwareType" : "Dummy (Does nothing, use for virtual switches only)",
                        "HardwareTypeVal" : 15,
                        "ID" : "14114",
                        "LastUpdate" : "2021-01-04 17:58:14",
                        "Name" : "mote",
                        "Notifications" : "false",
                        "PlanID" : "0",
                        "PlanIDs" :
                        [
                                0
                        ],
                        "Protected" : false,
                        "ShowNotifications" : true,
                        "SignalLevel" : "-",
                        "SubType" : "THGN122/123/132, THGR122/228/238/268",
                        "Timers" : "false",
                        "Type" : "Temp + Humidity",
                        "TypeImg" : "temperature",
                        "Unit" : 1,
                        "Used" : 1,
                        "XOffset" : "0",
                        "YOffset" : "0",
                        "idx" : "196"
                }
        ],
        "status" : "OK",
        "title" : "Devices"
}

With Temperature and humidity

pi@MM-lite:~$ curl "http://10.60.2.252:8080/json.htm?type=devices&rid=196"
{
        "ActTime" : 1623222662,
        "AstrTwilightEnd" : "18:46",
        "AstrTwilightStart" : "05:45",
        "CivTwilightEnd" : "17:46",
        "CivTwilightStart" : "06:45",
        "DayLength" : "10:07",
        "NautTwilightEnd" : "18:16",
        "NautTwilightStart" : "06:15",
        "ServerTime" : "2021-06-09 15:11:02",
        "SunAtSouth" : "12:16",
        "Sunrise" : "07:12",
        "Sunset" : "17:19",
        "app_version" : "2020.2 (build 12917)",
        "result" :
        [
                {
                        "AddjMulti" : 1.0,
                        "AddjMulti2" : 1.0,
                        "AddjValue" : 0.0,
                        "AddjValue2" : 0.0,
                        "BatteryLevel" : 14,
                        "CustomImage" : 0,
                        "Data" : "32.2 C, 34 %",
                        "Description" : "temperature and humidity in my office. polled from mqtt",
                        "DewPoint" : "14.35",
                        "Favorite" : 0,
                        "HardwareDisabled" : false,
                        "HardwareID" : 3,
                        "HardwareName" : "virtual hardware",
                        "HardwareType" : "Dummy (Does nothing, use for virtual switches only)",
                        "HardwareTypeVal" : 15,
                        "HaveTimeout" : false,
                        "Humidity" : 34,
                        "HumidityStatus" : "Comfortable",
                        "ID" : "14114",
                        "LastUpdate" : "2021-06-09 15:10:35",
                        "Name" : "mote",
                        "Notifications" : "false",
                        "PlanID" : "0",
                        "PlanIDs" :
                        [
                                0
                        ],
                        "Protected" : false,
                        "ShowNotifications" : true,
                        "SignalLevel" : "-",
                        "SubType" : "THGN122/123/132, THGR122/228/238/268",
                        "Temp" : 32.19,
                        "Timers" : "false",
                        "Type" : "Temp + Humidity",
                        "TypeImg" : "temperature",
                        "Unit" : 1,
                        "Used" : 1,
                        "XOffset" : "0",
                        "YOffset" : "0",
                        "idx" : "196",
                        "trend" : 1
                }
        ],
        "status" : "OK",
        "title" : "Devices"
}

mote sensor appears now, above the snake enclosure light.

thanks again for your attention

maxs

Hi tanks for great module. I have a small problem with the counter today from the power consumption. this doesn’t show me the amount of use of the day. Gas and water working fine. see screenshot. Do you have a solution, or where I have to search? !! Schermafbeelding 2021-07-24 om 20.59.12.jpg

majsoft

This post is deleted!

goedh452

@maxs

Alle data is retrieved from the JSON response. Could you post it for the electricity counter?

majsoft

Hi everyone, please help with setting up customs.css
Can anyone advise me how to change the font and icon size only for the first three rooms? (Red marked)
I would also need to delete the dividing lines marked in green.
I will be very grateful for more detailed advice.

customs.css

.domoCellState {
  text-align: right;
vertical-align: center;
  padding-left: 10px;
font-size: 300%; 			/* velikost čísla teploměru */
color: #FFFFFF; 
line-height: 100%;

}

.domoIconDiv {
  padding-right: 5px;
  font-size: 200%;                        /* velikost ikony teploměru */
  vertical-align: center;
}

.domoCell {
  text-align: left;
  vertical-align: center;
 font-size: 200%;			/* velikost pisma popisku teplomeru - vedle ikony teploměru */
line-height: 100%;
}


.domoRoomCell {
  vertical-align: center;
  padding-right: 20px;
font-size: 0%;			/* velikost pisma nadpisu room */
}

Config.js
the room numbers for which I would like to change the font size are idx 1, 8, 9

{
  module: "MMM-Domoticz-ext",
  
  position: "bottom_bar",
  config: {
    apiBase: "192.168.2.80",
    apiPort: "8081",
        updateInterval: 15,
displayType: "room",
          alwaysShowDashboard: false,
          alwaysShowActions: false,
          showButtons: false,
                 horizontal: true,
          columnCount: 3,
          dashboardColumnCount: 12,
          maxTitleLength: 18,

  				
     rooms: [
      { idx: "1" },
{ idx: "9" },
{ idx: "8" },
{ idx: "11" },
{ idx: "12" },
{ idx: "13" },
    ],


  }
},

Another question is whether it is possible to replace the character C with ° (character Celsius)

goedh452

@majsoft

I don’t think it is possible to just change the font for the first lines. All are in the same class.

majsoft

@majsoft

How to remove the lines (marked in green) I have already come.
using this code

hr.domoDivider {
  display: none;
}

If it is not possible to change the font size of only the first three sensors, it is possible to run 2 instances of the module in config.js, but I do not know how to distinguish these instances in customs.css