Read the statement by Michael Teeuw here.
MMM-Domoticz-ext: interact with Domoticz
-
@goedh452
I don’t know where the buttons should be? Are these the icons on my dashboard?
Here is my config and thank you.{ module: 'MMM-Domoticz-ext' , header: "DOMOTICZ" , position: "middle_center" , config: { apiBase: "xxx.xxx.x.xx" , apiPort: "xxxx" , updateInterval: 10 , animationSpeed: 0 , displayType: "actions" , alwaysShowDashboard: false , alwaysShowActions: true , showButtons: true , showTotals: true , showIcons: true , dashboardRooms: [ "1","2","3","4","5","6","7","8","9","10","11","12","13" ], buttonAllLabel: "Tous" , buttonTypeLabel: "Par Types d'appareils" , buttonRoomLabel: "Par Pièces" , buttonBothLabel: "Par Types/Pièces" , buttonFloorLabel: "Par Types/Niveaux" , buttonDashboardLabel: "Tableau de Bord" , horizontal: true , columnCount: 15 , dashboardColumnCount: 15 , maxTitleLenght: 25 , switchLabel: "Lumières" , dimmerLabel: "Interrupteurs" , temperatureLabel: "Température Intérieure" , humidityLabel: "Humidité" , usageLabel: "Electricité Maison" , rooms: [ { idx: "7" , name: "Cellier" }, { idx: "6" , name: "Buanderie" }, { idx: "1" , name: "Salon" }, { idx: "2" , name: "Salle à Manger" }, { idx: "3" , name: "Cuisine" }, { idx: "8" , name: "Ch.Parents" }, { idx: "9" , name: "Ch.Adèle" }, { idx: "10" , name: "Ch.Louis" }, { idx: "4" , name: "Bureau" }, { idx: "11" , name: "Salle de Bain" }, { idx: "12" , name: "Salle d'Eau" }, { idx: "13" , name: "Couloir-Entrée" }, { idx: "5" , name: "Terrasse" }, ], floors: [ { name: "Rez de Chaussée" , rooms: [ "1" , "2" , "3" , "6" , "7" , "8" , "11" , "13" ] }, { name: "Etage" , rooms: [ "4" , "9" , "10" , "12" ] }, { name: "Extérieurs" , rooms: [ "5" ] }, ], utilities: { utilityLabel: "Electricité Générale Maison" , showLabel: true , devices: [ { idx: "119" , deviceHeader: "Consommation Electrique" , useHeaderSymbol: false , headerSymbol: "plug" , counterTodayLabel: "Aujourd'hui" , counterTodayAppendText: "Kwh" , gaugeMinValue: -3000 , gaugeMaxValue: 3000 , gaugeAppendText: "Watts" , gaugeWidth: 190 , lineWidth: 20 , markerWidth: 20 , markerColor: "#F4D03F" }, { idx: "121" , deviceHeader: "Consommation Electrique Nette" , useHeaderSymbol: false , headerSymbol: "plug" , counterTodayLabel: "Aujourd'hui" , counterTodayAppendText: "Kwh" , gaugeMinValue: -3000 , gaugeMaxValue: 3000 , gaugeAppendText: "Watts" , gaugeWidth: 190 , lineWidth: 20 , markerWidth: 20 , markerColor: "#F4D03F" } , { idx: "117" , deviceHeader: "Production Solaire" , useHeaderSymbol: false , headerSymbol: "sun" , counterTodayLabel: "Aujourd'hui" , counterTodayAppendText: "Kwh" , gaugeMinValue: 0 , gaugeMaxValue: 3000 , gaugeAppendText: "Watts" , gaugeWidth: 190 , lineWidth: 20 , markerWidth: 20 , markerColor: "#70db70" }, { idx: "43" , deviceHeader: "Production Eau Chaude" , useHeaderSymbol: false , headerSymbol: "faucet" , counterTodayLabel: "Aujourd'hui" , counterTodayAppendText: "Kwh" , gaugeMinValue: 0 , gaugeMaxValue: 2800 , gaugeAppendText: "Watts" , gaugeWidth: 190 , lineWidth: 20 , markerWidth: 20 , markerColor: "#1E90FF" }, { idx: "46" , deviceHeader: "Pompe à Chaleur" , useHeaderSymbol: false , headerSymbol: "hot-tub" , counterTodayLabel: "Aujourd'hui" , counterTodayAppendText: "Kwh" , gaugeMinValue: 0 , gaugeMaxValue: 2000 , gaugeAppendText: "Watts" , gaugeWidth: 190 , lineWidth: 20 , markerWidth: 20 , markerColor: "#f4763f" } , ], }, custonGauges: { headerLabel: "Autres" , showLabel: true , devices: [ { idx: "25" , deviceHeader: "Voltage" , useHeaderSymbol: true , headerSymbol: "bolt" , gaugeAppendText: "volts" , gaugeMinValue: 210 , gaugeMaxValue: 260 , gaugeWidth: 150 , lineWidth: 16 , markerWidth: 16 , markerColor: "#f4763f" }, ], }, weather: { devices: [ "140" ], weatherLabel: "Températures", gaugewidth: 60, gaugeAppendText: "°C", }, Actions: [ { label: "Lumiere Exter Cuisine Shelly", url: "http://xxx.xxx.x.xx:xxxx/json.htm?type=command¶m=switchlight&idx=66&switchcmd=On" } , { label: "Lumiere Exter Cuisine Shelly", url: "http://xxx.xxx.x.xx:xxxx/json.htm?type=command¶m=switchlight&idx=66&switchcmd=Off" } , { label: "Lumiere Exter Entree Shelly", url: "http://xxx.xxx.x.xx:xxxx/json.htm?type=command¶m=switchlight&idx=62&switchcmd=On" } , { label: "Lumiere Exter Entree Shelly", url: "http://xxx.xxx.x.xx:xxxx/json.htm?type=command¶m=switchlight&idx=62&switchcmd=Off" } , { label: "Prise Commandée 1", url: "http://xxx.xxx.x.xx:xxxx/json.htm?type=command¶m=switchlight&idx=69&switchcmd=Toggle" } , ], }, }, -
I’m not sure if this is the problem, but there are two typos in the config: custonGauges should be customGauges en Actions should be actions (lower case a).
-
@goedh452
moron that I am, a fresh expert’s eyes and the problem is solved.
Big thanksFab
-
Great! Enjoy the module!
-
@goedh452
I just have to order all that! ;-) -
@goedh452
Hello,
Sorry to come back,
I have 2 buttons for each “action / label” I created, is this normal?Fab
-
No, that’s not normal. In the config I see 5 buttons. Am I correct that the module displays 10?
-
@goedh452
yes, when I pass “displayType: actions”, I have all the buttons in duplicate (on 2 lines) but in “all”, I have the list of devices and a line of buttons below … (can be the second line is hidden for lack of space!)
I couldn’t go on tonight.
Sorry.Fab
-
@fabaude
I think this is a bug. At the moment I do not have a pi running the mirror and module, so debugging is a bit difficult. If I find some time, I’ll see if I can install it and debug. If you only want to display the actions, there should be other modules that do this. -
@sdetweil Hi, I will try this after my travel, i’m not at home… Thank you !
-
Hi,
Does anyone know if it is possible to show the values of a smart meter without using a Gauge?
I would like to show the values in a different layout, for example a room layout, I can’t manage to do this now without using a Gauge.
I hope someone can help me!
Regards, Bliepie
-
Hi,
Does anyone know if it is possible to show different gauge colors depending on the value, for example:
- temperature in the range of -10 to 10 degrees in blue
- temperature in the range of 11 to 20 degrees in green
- temperature in the range of 21 to 30 degrees in yellow
-temperature in the range of 31 to 40 degrees in red
Of course, it would be nice to use such color meters for other measurements.
Hope someone can help me!
I greet Arthur
-
@ArturB I’m the developer of the module. This is not possible at the moment. Since I don’t own a magic mirror anymore I kind of stopped the development of this module. Feel free to clone it and make your own modifications to the code.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login