MMM-Domoticz-ext: interact with Domoticz

Shaitan

@goedh452
I started from zero to be sure that it is not a problem between your module and another program on my pi.
So I did a new installation of MM on another Raspberry Pi with a clean raspian.

Above, there is only your modules installed (I just copy my config.js from my other MM).
Here is the MM launch screen with SSH :

Nouvelle ie bitmap.png

goedh452

@shaitan

The errors indicate that Domiticz cannot be reached. Would it be possible to temporarily disable the authentication in Domoticz and test it again?

Shaitan

@goedh452 I don’t know how to remove the authentication on domoticz, I just added its IP to the whitelist and I got this: Nouvelle ie bitmap.png

goedh452

@shaitan

Just remove the username en password and save the settings. Schermafbeelding 2021-12-06 om 13.47.23.png

Shaitan

@goedh452 Same screen

sdetweil

@shaitan said in MMM-Domoticz-ext: interact with Domoticz:

I just added its IP to the whitelist

I just want to add for this and other folks…

when integrating multiple systems , 1st thing to do is disable all ip filtering/firewalls
in MagicMirror this is

address:"0.0.0.0", // let any outside system connect , "localhost" means ONLY apps INSIDE this same machine can connect
ipWhitelist:[],   // no restrictions on specific systems connecting.

once working, then u can add back whatever u might need… ,

and if it impacts the integration, then u will know as it is the last change…

Fabaude

Hello and thank you for this great module,
The installation and the settings went well but I can’t see my action buttons on my touch mirror.
The overview change buttons work well!
I integrated it into a page of MMM-Caroussel and MMM-GoogleAssistant operates my devices well but I cannot control the lights and others with touch buttons!
I hope to be clear and in the right place.

If you have any ideas…
Fab

goedh452

@fabaude

Could you post your config of the module please? And are buttons not displayed at all or aren’t they working when you click them?

Fabaude

@goedh452
I don’t know where the buttons should be? Are these the icons on my dashboard?
Here is my config and thank you.

{
				    module: 'MMM-Domoticz-ext' ,
				    header: "DOMOTICZ" ,
				    position: "middle_center" ,

				    config: {
					    apiBase: "xxx.xxx.x.xx" ,
					    apiPort: "xxxx" ,
					    updateInterval: 10 ,
					    animationSpeed: 0 ,
					    displayType: "actions" ,
					    alwaysShowDashboard: false ,
					    alwaysShowActions: true ,
					    showButtons: true ,
					    showTotals: true ,
					    showIcons: true ,
					    dashboardRooms: [ "1","2","3","4","5","6","7","8","9","10","11","12","13" ],
					    
					    buttonAllLabel: "Tous" ,
					    buttonTypeLabel: "Par Types d'appareils" ,
					    buttonRoomLabel: "Par Pièces" ,
				        buttonBothLabel: "Par Types/Pièces" , 
					    buttonFloorLabel: "Par Types/Niveaux" ,
					    buttonDashboardLabel: "Tableau de Bord" ,
					    horizontal: true ,
					    
					    columnCount: 15 ,
					    dashboardColumnCount: 15 ,
					    maxTitleLenght: 25 ,
					    switchLabel: "Lumières" ,
					    dimmerLabel: "Interrupteurs" ,
					    temperatureLabel: "Température Intérieure" ,
					    humidityLabel: "Humidité" ,
					    usageLabel: "Electricité Maison" ,
					    
					    rooms: [
						    { idx: "7" , name: "Cellier" },
						    { idx: "6" , name: "Buanderie" },
						    { idx: "1" , name: "Salon" },
						    { idx: "2" , name: "Salle à Manger" },
						    { idx: "3" , name: "Cuisine" }, 
						    { idx: "8" , name: "Ch.Parents" },
						    { idx: "9" , name: "Ch.Adèle" },
						    { idx: "10" , name: "Ch.Louis" },
						   	{ idx: "4" , name: "Bureau" },
						    { idx: "11" , name: "Salle de Bain" },
						    { idx: "12" , name: "Salle d'Eau" },
						    { idx: "13" , name: "Couloir-Entrée" },
						    { idx: "5" , name: "Terrasse" },
						    						    
					    ],

					    floors: [
						     { name: "Rez de Chaussée" ,
							    rooms: [ "1" , "2" , "3" , "6" , "7" , "8" , "11" , "13" ]
						    },
						     { name: "Etage" ,
							    rooms: [ "4" , "9" , "10" , "12" ]
						    },
						     { name: "Extérieurs" ,
							    rooms: [ "5" ]
						    },
					    ],

					    utilities: {
						    utilityLabel: "Electricité Générale Maison" ,
						    showLabel: true ,
						    devices: [
						    { idx: "119" ,
						      deviceHeader: "Consommation Electrique" ,
						      useHeaderSymbol: false ,
						      headerSymbol: "plug" ,
						      counterTodayLabel: "Aujourd'hui" ,
						      counterTodayAppendText: "Kwh" ,
						      gaugeMinValue: -3000 ,
						      gaugeMaxValue: 3000 ,
						      gaugeAppendText: "Watts" ,
						      gaugeWidth: 190 ,
						      lineWidth: 20 ,
						      markerWidth: 20 ,
						      markerColor: "#F4D03F"
						    },
						    
						    { idx: "121" ,
						      deviceHeader: "Consommation Electrique Nette" ,
						      useHeaderSymbol: false ,
						      headerSymbol: "plug" ,
						      counterTodayLabel: "Aujourd'hui" ,
						      counterTodayAppendText: "Kwh" ,
						      gaugeMinValue: -3000 ,
						      gaugeMaxValue: 3000 ,
						      gaugeAppendText: "Watts" ,
						      gaugeWidth: 190 ,
						      lineWidth: 20 ,
						      markerWidth: 20 ,
						      markerColor: "#F4D03F"
						    } ,

						    { idx: "117" ,
						      deviceHeader: "Production Solaire" ,
						      useHeaderSymbol: false ,
						      headerSymbol: "sun" ,
						      counterTodayLabel: "Aujourd'hui" ,
						      counterTodayAppendText: "Kwh" ,
						      gaugeMinValue: 0 ,
						      gaugeMaxValue: 3000 ,
						      gaugeAppendText: "Watts" ,
						      gaugeWidth: 190 ,
						      lineWidth: 20 ,
						      markerWidth: 20 ,
						      markerColor: "#70db70"
						    },

						    { idx: "43" ,
						      deviceHeader: "Production Eau Chaude" ,
						      useHeaderSymbol: false ,
						      headerSymbol: "faucet" ,
						      counterTodayLabel: "Aujourd'hui" ,
						      counterTodayAppendText: "Kwh" , 
						      gaugeMinValue: 0 ,
						      gaugeMaxValue: 2800 ,
						      gaugeAppendText: "Watts" ,
						      gaugeWidth: 190 ,
						      lineWidth: 20 ,
						      markerWidth: 20 ,
						      markerColor: "#1E90FF"
						    },
						    { idx: "46" ,
						      deviceHeader: "Pompe à Chaleur" ,
						      useHeaderSymbol: false ,
						      headerSymbol: "hot-tub" ,
						      counterTodayLabel: "Aujourd'hui" ,
						      counterTodayAppendText: "Kwh" ,
						      gaugeMinValue: 0 ,
						      gaugeMaxValue: 2000 ,
						      gaugeAppendText: "Watts" ,
						      gaugeWidth: 190 ,
						      lineWidth: 20 ,
						      markerWidth: 20 ,
						      markerColor: "#f4763f"
						    } ,
						    
						    
						    ],
					    },

						    custonGauges: {
								    headerLabel: "Autres" ,
								    showLabel: true ,
								    devices: [
									    { idx: "25" ,
							  deviceHeader: "Voltage" ,
							  useHeaderSymbol: true ,
							  headerSymbol: "bolt" ,
							  gaugeAppendText: "volts" ,
							  gaugeMinValue: 210 ,
							  gaugeMaxValue: 260 ,
							  gaugeWidth: 150 ,
							  lineWidth: 16 ,
							  markerWidth: 16 ,
							  markerColor: "#f4763f" 
							},
									    ],
								    }, 
							weather: {
										devices: [ "140" ],
										weatherLabel: "Températures", 
										gaugewidth: 60,
										gaugeAppendText: "°C",
									},
									
									Actions: [
											{ label: "Lumiere Exter Cuisine Shelly",
											url: "http://xxx.xxx.x.xx:xxxx/json.htm?type=command&param=switchlight&idx=66&switchcmd=On"
											} ,
											{ label: "Lumiere Exter Cuisine Shelly",
											url: "http://xxx.xxx.x.xx:xxxx/json.htm?type=command&param=switchlight&idx=66&switchcmd=Off"
											} ,
											{ label: "Lumiere Exter Entree Shelly",
											url: "http://xxx.xxx.x.xx:xxxx/json.htm?type=command&param=switchlight&idx=62&switchcmd=On"
											} ,
											{ label: "Lumiere Exter Entree Shelly",
											url: "http://xxx.xxx.x.xx:xxxx/json.htm?type=command&param=switchlight&idx=62&switchcmd=Off"
											} ,	
											{ label: "Prise Commandée 1",
											url: "http://xxx.xxx.x.xx:xxxx/json.htm?type=command&param=switchlight&idx=69&switchcmd=Toggle"
											} ,
											],					 				    
						},
					},

goedh452

@fabaude

I’m not sure if this is the problem, but there are two typos in the config: custonGauges should be customGauges en Actions should be actions (lower case a).

Fabaude

@goedh452
moron that I am, a fresh expert’s eyes and the problem is solved.
Big thanks

Fab

goedh452

@fabaude

Great! Enjoy the module!

Fabaude

@goedh452
I just have to order all that! ;-)

Fabaude

@goedh452
Hello,
Sorry to come back,
I have 2 buttons for each “action / label” I created, is this normal?

Fab

goedh452

@fabaude

No, that’s not normal. In the config I see 5 buttons. Am I correct that the module displays 10?

Fabaude

@goedh452
yes, when I pass “displayType: actions”, I have all the buttons in duplicate (on 2 lines) but in “all”, I have the list of devices and a line of buttons below … (can be the second line is hidden for lack of space!)
I couldn’t go on tonight.
Sorry.

Fab

goedh452

@fabaude
I think this is a bug. At the moment I do not have a pi running the mirror and module, so debugging is a bit difficult. If I find some time, I’ll see if I can install it and debug. If you only want to display the actions, there should be other modules that do this.

Shaitan

@sdetweil Hi, I will try this after my travel, i’m not at home… Thank you !

Bliepie

Hi,

Does anyone know if it is possible to show the values of a smart meter without using a Gauge?

I would like to show the values in a different layout, for example a room layout, I can’t manage to do this now without using a Gauge.

I hope someone can help me!

Regards, Bliepie

ArturB

Hi,

Does anyone know if it is possible to show different gauge colors depending on the value, for example:

temperature in the range of -10 to 10 degrees in blue
temperature in the range of 11 to 20 degrees in green
temperature in the range of 21 to 30 degrees in yellow
-temperature in the range of 31 to 40 degrees in red

Of course, it would be nice to use such color meters for other measurements.

Hope someone can help me!

I greet Arthur