Help please!!

sdetweil

innovation

@sdetweil GNU bash, version 5.0.3(1)-release (arm-unknown-linux-gnueabihf)
These shell commands are defined internally. Type help' to see this list. Type help name’ to find out more about the function name'. Use info bash’ to find out more about the shell in general.
Use man -k' or info’ to find out more about commands not in this list.

A star (*) next to a name means that the command is disabled.

job_spec [&] history [-c] [-d offset] [n] or history -anrw >
(( expression )) if COMMANDS; then COMMANDS; [ elif COMMANDS; t>
. filename [arguments] jobs [-lnprs] [jobspec …] or jobs -x command>
: kill [-s sigspec | -n signum | -sigspec] pid |>
[ arg… ] let arg [arg …]
[[ expression ]] local [option] name[=value] …
alias [-p] [name[=value] … ] logout [n]
bg [job_spec …] mapfile [-d delim] [-n count] [-O origin] [-s >
bind [-lpsvPSVX] [-m keymap] [-f filename] [-q > popd [-n] [+N | -N]
break [n] printf [-v var] format [arguments]
builtin [shell-builtin [arg …]] pushd [-n] [+N | -N | dir]
caller [expr] pwd [-LP]
case WORD in [PATTERN [| PATTERN]…) COMMANDS > read [-ers] [-a array] [-d delim] [-i text] [->
cd [-L|[-P [-e]] [-@]] [dir] readarray [-d delim] [-n count] [-O origin] [->
command [-pVv] command [arg …] readonly [-aAf] [name[=value] …] or readonly>
compgen [-abcdefgjksuv] [-o option] [-A action]> return [n]
complete [-abcdefgjksuv] [-pr] [-DEI] [-o optio> select NAME [in WORDS … ;] do COMMANDS; done
compopt [-o|+o option] [-DEI] [name …] set [-abefhkmnptuvxBCHP] [-o option-name] [–]>
continue [n] shift [n]
coproc [NAME] command [redirections] shopt [-pqsu] [-o] [optname …]
declare [-aAfFgilnrtux] [-p] [name[=value] …> source filename [arguments]
dirs [-clpv] [+N] [-N] suspend [-f]
disown [-h] [-ar] [jobspec … | pid …] test [expr]
echo [-neE] [arg …] time [-p] pipeline
enable [-a] [-dnps] [-f filename] [name …] times
eval [arg …] trap [-lp] [[arg] signal_spec …]
exec [-cl] [-a name] [command [arguments …]] > true
exit [n] type [-afptP] name [name …]
export [-fn] [name[=value] …] or export -p typeset [-aAfFgilnrtux] [-p] name[=value] …
false ulimit [-SHabcdefiklmnpqrstuvxPT] [limit]
fc [-e ename] [-lnr] [first] [last] or fc -s [p> umask [-p] [-S] [mode]
fg [job_spec] unalias [-a] name [name …]
for NAME [in WORDS … ] ; do COMMANDS; done unset [-f] [-v] [-n] [name …]
for (( exp1; exp2; exp3 )); do COMMANDS; done until COMMANDS; do COMMANDS; done
function name { COMMANDS ; } or name () { COMMA> variables - Names and meanings of some shell v>
getopts optstring name [arg] wait [-fn] [id …]
hash [-lr] [-p pathname] [-dt] [name …] while COMMANDS; do COMMANDS; done
help [-dms] [pattern …] { COMMANDS ; }

This is what it says

sdetweil

@innovation what did u type??

qrcp

should have replied

sam@galliumos:~/MagicMirror/modules/uploadPics$ qrcp
Error: requires at least 1 arg(s), only received 0
Run `qrcp help` for help.

anf then, if the file was present

ls qrcp.json

should have replied

sam@galliumos:~/MagicMirror/modules/uploadPics$ ls qrcp.json
qrcp.json

innovation

@sdetweil
pi@smart:~ $ qrcp
Error: requires at least 1 arg(s), only received 0
Run qrcp help for help.

sdetweil

@innovation and for the file?

innovation

@sdetweil
pi@smart:~ $ ls qrcp.json
ls: cannot access ‘qrcp.json’: No such file or directory
pi@smart:~ $

sdetweil

@innovation ok, then do these two commands

ip link show
iwconfig

show the results

mine look like this

sam@galliumos:~/MagicMirror/modules/uploadPics$ ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
9: wlp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DORMANT group default qlen 1000
    link/ether a4:c4:94:66:7e:b1 brd ff:ff:ff:ff:ff:ff
sam@galliumos:~/MagicMirror/modules/uploadPics$ iwconfig
wlp1s0    IEEE 802.11  ESSID:"fubar"  
          Mode:Managed  Frequency:5.745 GHz  Access Point: 24:05:88:41:B5:08   
          Bit Rate=650 Mb/s   Tx-Power=22 dBm   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:on
          Link Quality=70/70  Signal level=-34 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:52   Missed beacon:0

lo        no wireless extensions.

innovation

This post is deleted!

innovation

@sdetweil
pi@smart:~/MagicMirror/modules/uploadPics $ ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN mode DEFAULT group default qlen 1000
link/ether b8:27:eb:9b:20:c3 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DORMANT group default qlen 1000
link/ether b8:27:eb:ce:75:96 brd ff:ff:ff:ff:ff:ff
pi@smart:~/MagicMirror/modules/uploadPics $ iwconfig
eth0 no wireless extensions.

lo no wireless extensions.

wlan0 IEEE 802.11 ESSID:“ssk3”
Mode:Managed Frequency:2.422 GHz Access Point: CC:32:E5:E9:02:27
Bit Rate=24 Mb/s Tx-Power=31 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:on
Link Quality=42/70 Signal level=-68 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:10 Invalid misc:0 Missed beacon:0

pi@smart:~/MagicMirror/modules/uploadPics $

sdetweil

@innovation ok,

postinstall should be 43 lines long
if so do this

./postinstall

the check for qrcp.json again

innovation

@sdetweil Yes the file is there now

pi@smart:~/MagicMirror/modules/uploadPics $ ls qrcp.json
qrcp.json

sdetweil

@innovation ok, start mm

innovation

@sdetweil I am getting the same “default message if none supplied in the config.js”

sdetweil

@innovation weird

ok, add
debug: true,

to the module definition
and then do

npm start >somefile
once mm comes up u can stop it and then we can look at somefile

innovation

@sdetweil npm start >somefile
npm ERR! missing script: start

npm ERR! A complete log of this run can be found in:
npm ERR! /home/pi/.npm/_logs/2021-03-26T16_26_09_848Z-debug.log

Yes, the program started then I ended it

sdetweil

@innovation from the magicmirror folder please

innovation

@sdetweil Yes it opened. Where is the somefile?

sdetweil

@innovation in the magicmirror folder

> means put all the terminal window content of the pgm into the file
(same as for windows)

innovation

@sdetweil Nothing shows up in the terminal when I run in though

sdetweil

@innovation don’t understand, mm puts out messages
looks like this

> magicmirror@2.14.0 start /home/sam/MagicMirror
> DISPLAY="${DISPLAY:=:0}" ./node_modules/.bin/electron js/electron.js

[26.03.2021 11:17.39.334] [LOG]   Starting MagicMirror: v2.14.0
[26.03.2021 11:17.39.338] [LOG]   Loading config ...
[26.03.2021 11:17.39.343] [LOG]   Loading module helpers ...
[26.03.2021 11:17.39.345] [LOG]   No helper found for module: alert.
[26.03.2021 11:17.39.483] [LOG]   Initializing new module helper ...
[26.03.2021 11:17.39.483] [LOG]   Module helper loaded: updatenotification
[26.03.2021 11:17.39.484] [LOG]   No helper found for module: clock.
[26.03.2021 11:17.39.843] [LOG]   Initializing new module helper ...
[26.03.2021 11:17.39.843] [LOG]   Module helper loaded: calendar
[26.03.2021 11:17.39.844] [LOG]   No helper found for module: currentweather.
[26.03.2021 11:17.39.845] [LOG]   No helper found for module: weatherforecast.
[26.03.2021 11:17.39.865] [LOG]   Initializing new module helper ...
[26.03.2021 11:17.39.866] [LOG]   Module helper loaded: newsfeed
[26.03.2021 11:17.39.867] [LOG]   init module helper undefinedundefined
[26.03.2021 11:17.39.868] [LOG]   Module helper loaded: uploadPics