MMM-homeassistant-sensors no icons after MM upgrade to 2.19.0

karsten13

@Snille works only with latest mm release, you can test this before coding with "default": "http://localhost:8080/cors?url=http://your_not_working_url" (you have to adjust params to https or other port if necassary).

You find the corresponding PR here.

Snille

@karsten13 Hm… Not sure if that works, the “picture” is different depending om what the “sensor” is sending, so it’s not possible to set the “url=http://your_not_working_url” to something static… I’ll have to read up on it… :) Thank you!

sdetweil

@Snille you should be able to see the CORS error in the dev window.

however the url gets built now for the image, should be able to change it

wmx

@karsten13 , @Snille
Sorry for the delay, but hanks for your feedback.

Yes, I’m running MM on a raspi 3.
One more point I figured out:
The display connected to the raspi an showing THE mm on the wall has these problems with missing images.
If I connect with a browser from my desltop to the mm URL the images are visible.

I’ll try to test your given notes this weekend and return the results back here.

wmx

@Snille said in MMM-homeassistant-sensors no icons after MM upgrade to 2.19.0:

  icons: [{
  	"default": "https://www.snille.net/img/magicmirror/users/jane.png"
  }]

(think in the example there is one closing bracket missing “]”)

Had the time right now to test this one issue. I insertet the URL to the image from ha :-) (which is a static one here)

http://<my-ha-url>:8123/local/images/hem.png

but after restart of MM the problem still exists.

karsten13

@wmx

should be

icons: [{
  "default": "http://localhost:8080/cors?url=http://<my-ha-url>:8123/local/images/hem.png"
}]

wmx

@karsten13
Ok, tried this new config, but it does not change anything. :-(

borrmi

@karsten13

I tried this(in the brackets)

default": "http://mm_url:8080/cors?url=http://ha_url:8123/media/borrmi.png but this doesn’t work. :-(

can i also use a local path on my mm instead? (e.g. ‘~/MagicMirror/pictures/person.png’)

sdetweil

@borrmi said in MMM-homeassistant-sensors no icons after MM upgrade to 2.19.0:

http://ha_url:8123/media/borrmi.png

does that work from a browser or curl on the system running MagicMirror?

curl -sL http://ha_url:8123/media/borrmi.png >borrmi.png

borrmi

@sdetweil said in MMM-homeassistant-sensors no icons after MM upgrade to 2.19.0:

curl -sL http://ha_url:8123/media/borrmi.png >borrmi.png

no “404: Not Found”