MMM-PIR-Sensor restart problem

[trividar]

Now i have disconnect the cables from pir sensor and restart my pi. After reboot my pi my Magicmirror start automaticlly normal and after 2 seconds they got again black. That crazy thing is, I press ctrl+w and the blackscreen goes away and the the Magicmirror works “under” the blackscreen well…

[paviro]

@trividar try changing the port in the config.js from 8080 to 8888 and reboot.

[trividar]

@paviro I have now the same error just with 8888.

[MichMich]

How do you start your Mirror?

[trividar]

with autostart (from wiki).

[MichMich]

It somehow probably starts multiple instances. Disable the auto start and try to get it working manually first.

[trividar]

how can I do that?

[MichMich]

@trividar pm2 stop mm

check if it’s running pm2 list

No instances should be running at that point. then start the MM using npm start from your MagicMirror folder from a terminal running on your PI (so not via SSH)

[paviro]

Moved this part of the topic into a new thread since it has nothing to do with the module.

[trividar]

If i stop with pm2 stop mm and start my MM with npm start from terminal everything works fine, but without the PIR sensor. If i connect the sensor to my pi i get the blackscreen.

[MichMich]

@paviro See the replay in the other topic. It seems it has something to do with the module.

[paviro]

Strange no idea what could case that. Will check back…

[trividar]

Thank you both for your help!
How can I disable completely the MM autostart?

[trividar]

and just to be 100% sure if its so right?

[paviro]

Looks fine. The thing that I don’t understand is how connection this could lead to a seconds start of a MM instance…

[trividar]

did someone find any solution for my problem? i tried to delete the PIR-Modul and reinstall… but I have the same problem;o( THX

[trividar]

So i tried to fix my problem with the PIR sensor. Now I have an other problem. Do someone knew what i do wrong? Now the PIR shut down HDMI if they detect a motion and I don’t have a chance to turn on just with a reboot of the pi.

youtube

Sorry for the bad quality!

[Bangee]

I’ve reinstalled mm2 on a new SD Card and copied all my modules up en it.
Now I’ve got this error message with MMM-PIR-Module:

mm-0 App threw an error during load
mm-0 Error: Module version mismatch. Expected 49, got 48.
mm-0     at Error (native)
mm-0     at process.module.(anonymous function) [as dlopen] (ELECTRON_ASAR.js:167:20)
mm-0     at Object.Module._extensions..node (module.js:568:18)
mm-0     at Object.module.(anonymous function) [as .node] (ELECTRON_ASAR.js:167:20)
mm-0     at Module.load (module.js:458:32)
mm-0     at tryModuleLoad (module.js:417:12)
mm-0     at Function.Module._load (module.js:409:3)
mm-0     at Module.require (module.js:468:17)
mm-0     at require (internal/module.js:20:19)
mm-0     at Object.<anonymous> (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/wiring-pi/lib/exports.js:1:97)
mm-0 Whoops! There was an uncaught exception...
mm-0 Error: Module version mismatch. Expected 49, got 48.
mm-0     at Error (native)
mm-0     at process.module.(anonymous function) [as dlopen] (ELECTRON_ASAR.js:167:20)
mm-0     at Object.Module._extensions..node (module.js:568:18)
mm-0     at Object.module.(anonymous function) [as .node] (ELECTRON_ASAR.js:167:20)
mm-0     at Module.load (module.js:458:32)
mm-0     at tryModuleLoad (module.js:417:12)
mm-0     at Function.Module._load (module.js:409:3)
mm-0     at Module.require (module.js:468:17)
mm-0     at require (internal/module.js:20:19)
mm-0     at Object.<anonymous> (/home/pi/MagicMirror/modules/MMM-PIR-Sensor/node_modules/wiring-pi/lib/exports.js:1:97)
mm-0 MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
mm-0 If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues
mm-0 Launching application.

Any ideas?

[Chiggo]

Not sure, but isn’t there a wiring mismatch in the picture of your post?

Think you mixed up brown and orange.
Orange (VCC), coming from PIR-Sensor, should go to PIN2 and brown (GND), coming from PIR, should go to PIN6.

To your last post:
I would prefer to add the modules from github, not copy.
Are the libraries and drivers for wiring-pi already installed?

[Bangee]

WiringPi should be installed. I’ve tested this using this command: gipo readall

The module is now installed using git. not copied.

I’ve tried to rebuild… and also to rebulid electron.
npm install --save-dev electron-rebuild