install upgrade scripts changed for version 2.25 and node 20

[sdetweil]

@bdream interesting… never seen a problem like that before…

[bdream]

@sdetweil I wonder as both scrips are nearly same.
one is running other gives error in line 1 from script. I can’t see a difference :(

[mumblebaj]

@sdetweil Great work Sam. Do we need to run the node script first?

bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/node20_install.sh)”

Or just the normal upgrade process with apply?

After fixing my dev machine I am about ready to give your script a go on my mirror but want to just double check if the node script is still required.

[sdetweil]

@bdream try this

curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/testit/upgrade-script.sh

[bdream]

@sdetweil I get the whole script shown on the screen

[sdetweil]

@bdream as it should,

I see there was a problem with the " in the 1st post…

try again, copy/paste that line again

[mumblebaj]

@sdetweil Just to let you know this script worked fine on my Mirror first time. Did not need to run the Node one

[sdetweil]

@mumblebaj said in install upgrade scripts changed for version 2.25 and node 20:

Did not need to run the Node one

correct… it is part of the install and upgrade scripts now

did u run the testit branch version?

[mumblebaj]

@sdetweil That is correct and worked first time. Checked the installers log and no errors or issues either. Strange thing though, it had no issue with MMM-NewsAPI either and that works fine.

[bdream]

@sdetweil yes, script is running now :beaming_face_with_smiling_eyes:

MM is not starting automatic, also not after reboot.
But this work fine

  pm2 start 0

[sdetweil]

@bdream ok

probably missing library on some module

do this

pm2 stop all
cd ~/MagicMirror
npm start >/somefile.txt 2>&1

wait 15 seconds
in this same terminal window do
ctrl-c

then examine somefile.txt

[bdream]

@sdetweil do I have to use sudo?

And what exactly you mean “then examine somefile.txt”?

[sdetweil]

@bdream edit sorry, typo

2>./somefile.txt
(notice the missing leading .)

examine… edit, view, look inside

[Jonae]

@sdetweil

this run this script:

bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/testit/raspberry.sh)”

get this error:
system running in command line mode, configured for graphical desktop, please reboot

after reboot, same error

[sdetweil]

@Jonae are you running the OS in commandline mode?

boot to prompt… not desktop

do , and show results
lsb_release -a
uname -a

or email me the ~/install.log
same userid at gmail

[Jonae]

@sdetweil said in install upgrade scripts changed for version 2.25 and node 20:

@Jonae are you running the OS in commandline mode?

boot to prompt… not desktop

do , and show results
lsb_release -a
uname -a

or email me the ~/install.log
same userid at gmail

i think i have a problem with the imager software … checking right now

[Jonae]

i tryed to install on rpi4, i changed to rpi3 and now it works. Does MM not support rpi4 anymore?

[sdetweil]

@Jonae you have to use the new test versions.

listed at the top.of this topic… I just installed on the pi 4. which image did u pick? 32 bit or 64 bit?

uname -a

will show it

[Jonae]

@sdetweil

32bit, as i always did …

[sdetweil]

@Jonae ok. I will be away for a couple hours, but will test that again when I return.