Google Calendars not loading

[sdetweil]

@mspk ok, one other thing, in the system network preferences, disable ipv6

desktop, menu top left, preferences, pi config, network.

the electron version is supposed to have the fix for this (trying to talk ipv6 to an ipv4 server… oops can’t connect)

[mspk]

@sdetweil

also already done.

[sdetweil]

@mspk and rebooted???

from command line

ip addr

[mspk]

@sdetweil

2: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether d8:3a:dd:87:e0:80 brd ff:ff:ff:ff:ff:ff
    inet 192.168.178.68/24 brd 192.168.178.255 scope global dynamic noprefixroute wlan0
       valid_lft 863889sec preferred_lft 755889sec
    inet6 2a0b:9e00:116f:fe30:da3a:ddff:fe87:e080/64 scope global dynamic mngtmpaddr
       valid_lft 7085sec preferred_lft 3485sec
    inet6 fe80::da3a:ddff:fe87:e080/64 scope link
       valid_lft forever preferred_lft forever

[sdetweil]

@mspk said in Google Calendars not loading:

inet6 2a0b:9e00:116f:fe30:da3a:ddff:fe87:e080/64 scope global dynamic mngtmpaddr
valid_lft 7085sec preferred_lft 3485sec
inet6 fe80::da3a:ddff:fe87:e080/64 scope link
valid_lft forever preferred_lft forever

still enabled

[mspk]

@sdetweil disabled it inside the sysctl.conf, dont know why it didn’t change

[mspk]

wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether d8:3a:dd:87:e0:80 brd ff:ff:ff:ff:ff:ff
inet 192.168.178.68/24 brd 192.168.178.255 scope global dynamic noprefixroute wlan0
valid_lft 863983sec preferred_lft 755983sec

[valentindey]

Hi,

Is there any update on this?

I seem to have the same (or similar) issue on a Raspberry Pi 3. For me it’s just one out of a few calendars that isn’t working and I also get the vulkan error message.
The calendar has been working before but I can’t seem to trace it back to a recent change.
I already started MM with node option --dns-result-order=ipv4first as the calendars come from a Nextcloud instance which does not support ipv6.

[sdetweil]

@valentindey we haven’t got a clear indication where the trouble is. is it in electron, ? or …

did you try electron 28.1.1?

npm install electron@28.1.1

[valentindey]

@sdetweil yes, I tried an older version and the newer version of electron. So far to no avail.

Checking the logs I see that events are fetched from the calendar in question, so it’s something about displaying them.
Also, running the exact same setup on another machine works perfectly fine.

[sdetweil]

@valentindey yeh, its weird for sure…

lets go back to the prior parser

cd ~/MagicMirror
npm install node-ical@0.16.1

and restart MagcMirror

[eniac]

@sdetweil said in Google Calendars not loading:

let`s go back to the prior parser
cd ~/MagicMirror
npm install node-ical@0.16.1

and restart MagcMirror

Does the Job. Thank you …

[sdetweil]

@eniac thanks for the feedback

[shizzlesticks]

I updated my MagicMirror this week and have been struggling to figure out why my Google calendars weren’t loading. It was the parser for sure… Thank you!

[valentindey]

@sdetweil this works for me as well. Thanks a lot for the help, very much appreciated!

[machine4500]

helped for me too, thanks

[BKeyport]

to everyone - Google Calendars and everything else Google has been struggling with outside tools across the board. They upgraded their login experience, and with that, broke all sorts of things - So much so, I had to go to Microsoft for my business.

Fixes may or may not actually be fixes.