Mirror Freezing

plainbroke

Oh and I can ssh in and run date and the time is correct.
If I run MM in a separate browser on my laptop I pops up and runs fine and very clean. Time is correct. ect. which then causes the MM on the wall to start working again…
I did run your update script with force tonight when I came home and it had been frozen for approx. 3.5 hrs.
I am currently watching to see if it freezes again. so frustrating.

sdetweil

@plainbroke start in server mode and connect chrome or some other browser, sounds like an electron problem

maybe change the pages rate a little (10%)

sdetweil

@also to stackoverflow

https://stackoverflow.com/questions/72876389/how-does-chromium-implement-failifmajorperformancecaveat

which points to a graphical module, globe, something doing heavy charts.

plainbroke

@sdetweil
you are correct electron is hoarding resources.
Is there a way to kill a PID in debian to see what module may be causing this.
1998
1988
and 1949 are top three cpu hogs…

sdetweil

@plainbroke you can

sudo kill -9 pid

but i dont know what functions are in what process, electron decides that. one is the page/tab

plainbroke

@sdetweil
Just did a kill 1998 and it is now not showing up but the mirror is still working,
I guess I will wait until one of the modules doesn’t work anymore.
Then i will know which one to remove, right?
Turns out that was the wireless connection I think.
MM stopped and I can not access it through ssh time to POPO.
I will keep after this but I will also stop globe in the config.js. just to see if that helps.
Thanks for your help I have learned alot tonight about the way debian and MM run.

sdetweil

@plainbroke i think page switching while globe is drawing
is probably the cause

freelancerakash

@plainbroke this is the best Answer

plainbroke

@sdetweil
Not so sure that it was globe came home today and the same screen was stopped,
MMM-Dogs and the time was the same 3:37 pm but the real time was 4:30 pm.
So re-enabled globe and disabled MMM-Dogs to see if it does it again tomorrow…
I am almost wondering if it isn’t something to do with MMM-birthday-paged.
It was the last module I remember adding since this started.
I will slowly figure it out by disabling one module at a time that seems to hog resources.

By the way what do it mean by zombie in top.?

top - 16:53:44 up 17 min,  3 users,  load average: 5.34, 5.15, 3.71
Tasks: 222 total,   3 running, 218 sleeping,   0 stopped,   1 zombie
%Cpu(s): 77.3 us, 12.1 sy,  0.0 ni, 10.6 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   7820.9 total,   4021.5 free,   1923.3 used,   2830.4 buff/cache
MiB Swap:    512.0 total,    512.0 free,      0.0 used.   5897.6 avail Mem

karsten13

@plainbroke

see e.g. https://www.baeldung.com/linux/clean-zombie-process