MMM-Remote-Control

KristjanESPERANTO

@Snille Cool. I’m glad it works 🎉

bloodknot

@KristjanESPERANTO - Cannot GET /api/refresh (or any API call)
MMM-Remote-Control is working fine on the same computer that the API is not found. This occurred in the last couple of updates. Nothing else changed in the configuration and/or modules.

magicmirror2 = 192.168.4.21
http://magicmirror2:8080/remote.html#main-menu WORKS from 192.168.4.210
http://magicmirror2:8080/api/refresh Does NOT Work from 192.168.4.210

MM Config:
address: "0.0.0.0",
port: 8080
basePath: "/",
ipWhitelist:[],

module: 'MMM-Remote-Control',
config: {
	customCommand: {}
     	showModuleApiMenu: true,
     	secureEndpoints: true,
     	apiKey: '********-****-****-****-************'  
     	showQRCode: false

GET http://magicmirror2:8080/api/refresh?apiKey=********-****-****-****-************ 404 (Not Found)

What has changed? Did I miss an update? Any assistance will be great

KristjanESPERANTO

@bloodknot I think I solved it, please update to v4.2.0 and check 🙂

bloodknot

@KristjanESPERANTO
Update to 4.2.0 fixed the issue. Thanks for the quick response!!

bloodknot

@kristjanesperanto
It looks like something also happened to showalert:

http://magicmirrorip:8080/api/module/alert/showalert?message=Hello&timer=2000&apiKey=********-****-****-****-**********

TypeError: Cannot read properties of undefined (reading 'showalert')
    at Class.answerModuleApi (/home/bloodknot/MagicMirror/modules/MMM-Remote-Control/API/api.js:457:35)
    at /home/bloodknot/MagicMirror/modules/MMM-Remote-Control/API/api.js:296:14
    at Layer.handleRequest (/home/bloodknot/MagicMirror/modules/MMM-Remote-Control/node_modules/router/lib/layer.js:152:17)
    at next (/home/bloodknot/MagicMirror/modules/MMM-Remote-Control/node_modules/router/lib/route.js:157:13)
    at Route.dispatch (/home/bloodknot/MagicMirror/modules/MMM-Remote-Control/node_modules/router/lib/route.js:117:3)
    at handle (/home/bloodknot/MagicMirror/modules/MMM-Remote-Control/node_modules/router/index.js:435:11)
    at Layer.handleRequest (/home/bloodknot/MagicMirror/modules/MMM-Remote-Control/node_modules/router/lib/layer.js:152:17)
    at /home/bloodknot/MagicMirror/modules/MMM-Remote-Control/node_modules/router/index.js:295:15
    at param (/home/bloodknot/MagicMirror/modules/MMM-Remote-Control/node_modules/router/index.js:600:14)
    at param (/home/bloodknot/MagicMirror/modules/MMM-Remote-Control/node_modules/router/index.js:610:14)
    at param (/home/bloodknot/MagicMirror/modules/MMM-Remote-Control/node_modules/router/index.js:610:14)
    at processParams (/home/bloodknot/MagicMirror/modules/MMM-Remote-Control/node_modules/router/index.js:664:3)
    at next (/home/bloodknot/MagicMirror/modules/MMM-Remote-Control/node_modules/router/index.js:291:5)
    at /home/bloodknot/MagicMirror/modules/MMM-Remote-Control/API/api.js:148:7
    at Layer.handleRequest (/home/bloodknot/MagicMirror/modules/MMM-Remote-Control/node_modules/router/lib/layer.js:152:17)
    at trimPrefix (/home/bloodknot/MagicMirror/modules/MMM-Remote-Control/node_modules/router/index.js:342:13)

KristjanESPERANTO

@bloodknot Thanks for reporting. Release v4.2.1 should fix it. Please check 🙂

bloodknot

@KristjanESPERANTO
I don’t get a failure, however the alert/showalert function does not work:

{"success":false,"message":"Module alert does not have any actions defined."}

KristjanESPERANTO

@bloodknot Thanks for the quick feedback. Okay, that was still progress. Now please try v4.2.2.

bloodknot

@KristjanESPERANTO
That seems to have fixed my specific problem. Thank you!!!
I have tested:
http://magicmirror2:8080/api/monitor/on

bloodknot

@KristjanESPERANTO
Sorry for the split message.
I have successfully tested:
http://magicmirrorip:8080/api/monitor/on
http://magicmirrorip:8080/api/monitor/off
http://magicmirrorip:8080/api/refresh
http://magicmirrorip:8080/api/reboot
http://magicmirrorip:8080/api/alert/showalert

KristjanESPERANTO

@bloodknot Perfect, thank you for testing! 😃

vtek

hey guys…

having some issues using the shutdown/reboot commands…they throw this error, even though I have the API key in the config

{“success”:false,“message”:“Forbidden: API Key Not Provided!”}

here’s the config

            {
                    module: 'MMM-Remote-Control',
                    // position: 'bottom_left', // Required to show URL/QR code on mirror
                    // you can hide this module afterwards from the remote control itself
                    config: {
                            showModuleApiMenu: true,
                            secureEndpoints: true,
                            apiKey: "111111111-2222-3333-4444-555555555555",
                            customCommand: {
                                            monitorOnCommand: 'loginctl unlock-session 1',
                                            monitorOffCommand: 'loginctl lock-session 1',
                                            shutdownCommand: 'systemctl poweroff',
                                            rebootCommand: 'systemctl reboot',  // Optional, See "Using Custom Commands" below
                                            },

            }
            },

vtek

said in MMM-Remote-Control:

hey guys…

having some issues using the shutdown/reboot commands…they throw this error, even though I have the API key in the config

{“success”:false,“message”:“Forbidden: API Key Not Provided!”}

here’s the config

            {
                    module: 'MMM-Remote-Control',
                    // position: 'bottom_left', // Required to show URL/QR code on mirror
                    // you can hide this module afterwards from the remote control itself
                    config: {
                            showModuleApiMenu: true,
                            secureEndpoints: true,
                            apiKey: "111111111-2222-3333-4444-555555555555",
                            customCommand: {
                                            monitorOnCommand: 'loginctl unlock-session 1',
                                            monitorOffCommand: 'loginctl lock-session 1',
                                            shutdownCommand: 'systemctl poweroff',
                                            rebootCommand: 'systemctl reboot',  // Optional, See "Using Custom Commands" below
                                            },

            }
            },

i figure it out…had to append the apiKey at the end of the url for all commands
http://192.168.1.5:8888/api/command/rebootCommand?apiKey=111111111-2222-33333-4444

rkorell

@KristjanESPERANTO Dear Kristijan,

after a long time I finally managed to see your “new” modul.
First of all: Thanks a lot for your effort, again - nice piece!

In the past few days I’ve completely rebuilt my mirror and migrated it to trixie as well as to the actual mirror and node versions.

I ran into a reproducible issue with the restart functionality when MagicMirror is managed by pm2 (which is the recommended setup per the official MagicMirror documentation).

The Problem

When triggering a restart via the Remote-Control UI (or the /api/restart endpoint), MagicMirror enters an endless crash-loop with EADDRINUSE: address already in use :::8080.

Root Cause
The handleRestart function in node_helper.js (lines 717-741) uses the Electron-native restart mechanism:

const {app} = require("electron");
app.relaunch();
app.quit();

This works fine in standalone mode, but creates a race condition with pm2:

app.relaunch() spawns a new Electron instance (child of the current process)
app.quit() terminates the current Electron instance
pm2 detects the termination as a crash and spawns another Electron instance
Now two Electron instances compete for port 8080 → EADDRINUSE → both crash → pm2 keeps restarting → infinite loop

The only way to recover is to manually identify and kill the orphaned Electron process, then trigger a clean restart via touch config.js (which pm2’s file-watch picks up).

Interestingly, the catch-block fallback for server mode (lines 726-739) already does it correctly — it calls process.exit(0) and lets the process manager handle the restart. The Electron code path just doesn’t account for the pm2 scenario.

Possible Fix

When running under pm2, the Electron-native app.relaunch() should be skipped entirely.

pm2 can be detected via environment variables like PM2_HOME, pm_id, or PM2_USAGE:

handleRestart (query, res) {
  try {
    const {app} = require("electron");
    if (!app) { throw "Could not get Electron app instance."; }

    // When running under pm2, don't use app.relaunch() — pm2 handles restart
    if (process.env.PM2_HOME || process.env.pm_id !== undefined) {
      Log.log("Running under pm2, exiting cleanly for process manager restart...");
      this.sendResponse(res, undefined, {action: "RESTART", info: "Exiting for pm2 restart..."});
      setTimeout(() => app.quit(), 1000);
      return;
    }

    this.sendResponse(res, undefined, {action: "RESTART", info: "Restarting Electron..."});
    app.relaunch();
    app.quit();
  } catch (error) {
    // ... existing server mode fallback ...
  }
}

Environment

MagicMirror 2.34.0
MMM-Remote-Control 4.2.2 (commit b854832)
Node.js v22, Electron 39.5.2
Raspberry Pi 5, Debian 13 (Trixie)
Process manager: pm2 with file-watch on config.js

Workaround

For now, I’ve documented this for my setup: never use the restart button in Remote-Control. Monitor ON/OFF works fine, only the restart is
affected.

Thanks for considering this — happy to test any fix if needed!

Warmest regards,
Ralf

KristjanESPERANTO

Hi @vtek, glad you figured it out! Just for reference: when secureEndpoints: true is set, the API key can be passed in two ways:

URL parameter: ?apiKey=YOUR_KEY
HTTP header: Authorization: apiKey YOUR_KEY

Also, starting with v4.2.4 the error message now directly hints at the solution, so the next person running into this should find it faster 🙂

KristjanESPERANTO

Hi @rkorell, thank you for the detailed bug report — the root cause analysis was spot on and made it straightforward to fix!

The fix is included in v4.2.4: when MMM-Remote-Control detects it’s running under pm2 (via PM2_HOME or pm_id environment variables), it now skips app.relaunch() and only calls app.quit(), letting pm2 handle the restart cleanly.

Would be great if you could confirm it works on your setup!

rkorell

@KristjanESPERANTO Dear Kristijan,
just tested v4.2.4 — works perfectly! Restart via the Remote-Control UI now completes cleanly
under pm2, no orphaned Electron process, no port conflict. Exactly the behavior you’d expect.

I also noticed you added a dedicated handleRestart.test.js with 210 lines of unit tests covering
both the pm2 and standalone code paths — that’s really impressive and goes well beyond just a
quick fix. Having proper test coverage for this kind of dual-mode behavior is exactly the right
thing to do. Much appreciated!

Thanks for the incredibly fast turnaround and the quality of the fix. Consider this confirmed
working on:

MagicMirror 2.34.0
MMM-Remote-Control 4.2.4
Node.js v22, Electron 39.5.2
Raspberry Pi 5, Debian 13 (Trixie)
pm2 with file-watch

Warmest regards,
Ralf

KristjanESPERANTO

@rkorell Thank you very much for this feedback and appreciation 🙂 It’s interesting that you took a deeper look at the changes.

jakabasej4

This post is deleted!