MagicMirror Forum
    • Recent
    • Tags
    • Unsolved
    • Solved
    • MagicMirror² Repository
    • Documentation
    • 3rd-Party-Modules
    • Donate
    • Discord
    • Register
    • Login
    A New Chapter for MagicMirror: The Community Takes the Lead
    Read the statement by Michael Teeuw here.

    MM Nightly Reboot Needed, PM2 ?

    Scheduled Pinned Locked Moved Troubleshooting
    7 Posts 2 Posters 3.7k Views 2 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • C Offline
      cohron @Mykle1
      last edited by

      @Mykle1 I did but since i didnt have the Edit /etc/modprobe.d/8192cu.conf file, I’m running an rPI3b so I did the wireless-power off step bu it didnt seem to help or the problem is outside the raspberry.

      I just found how to do a nightly reboot using crontab.
      https://www.raspberrypi.org/forums/viewtopic.php?f=91&t=126106

      Mykle1M 1 Reply Last reply Reply Quote 0
      • Mykle1M Offline
        Mykle1 Project Sponsor Module Developer @cohron
        last edited by

        @cohron said in MM Nightly Reboot Needed, PM2 ?:

        I just found how to do a nightly reboot using crontab.

        That worked for me and I have Pi3 b as well. Glad you found the script you were looking for. Good luck!

        Create a working config
        How to add modules

        C 1 Reply Last reply Reply Quote 0
        • C Offline
          cohron @Mykle1
          last edited by

          @Mykle1 curious, did you have the /etc/modprobe.d/8192cu.conf file already or did you create it? i just created it, just in case that does the trick too.

          thanks again.

          Mykle1M 2 Replies Last reply Reply Quote 0
          • Mykle1M Offline
            Mykle1 Project Sponsor Module Developer @cohron
            last edited by Mykle1

            @cohron said in MM Nightly Reboot Needed, PM2 ?:

            @Mykle1 curious, did you have the /etc/modprobe.d/8192cu.conf file already or did you create it? i just created it, just in case that does the trick too.
            thanks again.

            As it turns out, I do NOT have the 8192cu.conf file are all.
            pi@Pi3:/etc/modprobe.d $ ls
            fbdev-blacklist.conf ipv6.conf libpisock9.conf raspi-blacklist.conf
            pi@Pi3:/etc/modprobe.d $
            `
            However, looking at the instructions again, it says:

            For Raspberry Pi 3
            Edit /etc/network/interfaces

            sudo nano /etc/network/interfaces
            Add the following line under the wlan0 section

            wireless-power off
            Reboot your PI

            sudo reboot

            It’s been some time since I set up my Pi but it’s obvious that I only did this portion of the instruction

            Create a working config
            How to add modules

            1 Reply Last reply Reply Quote 0
            • Mykle1M Offline
              Mykle1 Project Sponsor Module Developer @cohron
              last edited by

              @cohron

              I was curious so I checked my /etc/network/interfaces file. It would appear I don’t have the edit we’re talking about, yet my wifi never drops. Here is the file:

              interfaces(5) file used by ifup(8) and ifdown(8)

              Please note that this file is written to be used with dhcpcd

              For static IP, consult /etc/dhcpcd.conf and ‘man dhcpcd.conf’

              Include files from /etc/network/interfaces.d:

              source-directory /etc/network/interfaces.d

              auto lo
              iface lo inet loopback

              iface eth0 inet dhcp

              auto wlan0
              allow-hotplug wlan0
              iface wlan0 inet dhcp
              wireless-essid XE1S3
              wireless-key 5BBXXXXXX

              Create a working config
              How to add modules

              1 Reply Last reply Reply Quote 0
              • 1 / 1
              • First post
                Last post
              Enjoying MagicMirror? Please consider a donation!
              MagicMirror created by Michael Teeuw.
              Forum managed by Sam, technical setup by Karsten.
              This forum is using NodeBB as its core | Contributors
              Contact | Privacy Policy