MMM-Bergfex doesent load respectively should be a valid spdx license expression

[astrakid]

@gianienderlin
That would be cool. Or put ut in here for ithers as well.

[gianienderlin]

to be honest, I don’t know what I’ve changed, too long ago. but it works for me

[gianienderlin]

oh sorry, i cant upload my files…

Error
You do not have enough privileges for this action

[marphi1602]

Has anybody solved the issue? I am facing also the “loading” issue. I was thinking of that a certain ski area doesn´t exist anymore, but I took only one (Hintertux) which is definitely open and listed on the web page… In case somebody solved the issue, please upload your files.

[astrakid]

not yet, i am waiting for the files of gianienderlin, then i can find out what is the fix.

[gianienderlin]

here are my custom files. please let me know if they work.

http://www.filehosting.org/file/details/705911/MMM-bergfex.zip

[astrakid]

@gianienderlin said in MMM-Bergfex doesent load respectively should be a valid spdx license expression:

custom files. please let me k

as far as i could see there is one main change in node_helper.js:
instead of
var sys = require(‘sys’);

he uses
var util = require(‘util’);

regards,
andre

[marphi1602]

@gianienderlin worked for me! The only thing what I´ve changed was the const in node_helper.js.
Due to the fact that I am more interested in seeing the results of the Austrian ski resorts I put // Constants
const URL = “http://www.bergfex.at/oesterreich/schneewerte/”;

Thank you!

[gianienderlin]

yes this is possible: -) but thought there was more…

[marphi1602]

anybody knows how I have to set ‘Kitzbühel - Kirchberg’ to the config? I think I am struggling with the “ü” same also for special characters like “-”… In case I am putting Kitzbühel into the config it says loading…

[astrakid]

@marphi1602 said in MMM-Bergfex doesent load respectively should be a valid spdx license expression:

Kitzbühel - Kirchberg

it works for me without an issue. my config part:

                {
                        module: 'MMM-bergfex',
                        position: 'top_right',
                        classes: 'small dimmed',
                        config: {
                            updateInterval: 30*60*1000,
                            animationSpeed: 0,
                            header: 'Schneebericht',
                                skiareas: [
                                                'Fieberbrunn - Saalbach Hinterglemm Leogang',
                                                'Kitzbühel - Kirchberg',
                                       ],
                                shortenArea: 20,
                                cssclassrow: 'normal',
                                cssclassheader: 'bright'

                        }
                },

edit: which ‘locale’ are you using? i have “C” configured except “LANGUAGE=” and “LC_ALL=”.
edit2: maybe you can try this (this is what is visible in the logfile): ‘Kitzbhel - Kirchberg’

[marphi1602]

@astrakid thanks! I checked the config once again and I’ve seen some odd ascii characters hence it hasn’t worked properly. Now it’s working!

[marphi1602]

Is there any chance to highlight this ski resort with the highest amount of fresh snow?

[hermlam]

@gianienderlin @astrakid Even after copying these files, the problem stays: the only thing I see is the header and ‘_loading…’

[marphi1602]

@hermlam pls publish the bergfex part of your config. Are you looking for the snow results of Austria or Switzerland? I had to change the const to the Austrian snow result url, pls see the posts above. For the first step I would suggest to take only one ski resort in your Cfg.

[astrakid]

@marphi1602 highlightingwould need changes to the sourcecode.

[binderth]

I do have the same problem:

To avoid some enconding Problems, I picked some oneword-places for start:

		{
			module: 'MMM-bergfex',
			position: 'top_right', 
			classes: 'small dimmed', 
			config: {
			    updateInterval: 30*60*1000,
			    animationSpeed: 0,
			    header: 'Schneebericht',
				skiareas: [
						// 'Zell am Ziller - Zilleral Arena',
						// 'Gerlos - Zillertal Arena',
						'Ischgl',
						'Jungholz',
				],
				shortenArea: 20,
				cssclassrow: 'normal',
				cssclassheader: 'bright'				
			}
		},

like described in this thread (https://forum.magicmirror.builders/post/30795), I changed to var util = require(‘util’); in node_helper.js

In my logs I get this:

TypeError: Cannot read property 'parent' of undefined
    at Function.exports.update (/home/pi/MagicMirror/modules/MMM-bergfex/node_modules/cheerio/lib/parse.js:69:25)
    at module.exports (/home/pi/MagicMirror/modules/MMM-bergfex/node_modules/cheerio/lib/parse.js:19:11)
    at Function.exports.load (/home/pi/MagicMirror/modules/MMM-bergfex/node_modules/cheerio/lib/static.js:27:14)
    at Request._callback (/home/pi/MagicMirror/modules/MMM-bergfex/node_helper.js:43:19)
    at self.callback (/home/pi/MagicMirror/modules/MMM-bergfex/node_modules/request/request.js:186:22)
    at emitOne (events.js:96:13)
    at Request.emit (events.js:191:7)
    at Request.onRequestError (/home/pi/MagicMirror/modules/MMM-bergfex/node_modules/request/request.js:878:8)
    at emitOne (events.js:96:13)
    at ClientRequest.emit (events.js:191:7)

[marphi1602]

@binderth are you sure that your pi is connected with the internet? I have seen the same error a couple of weeks ago and I noticed that my pi wasn’t connected with the www anymore. What’s happening in case you ping www.google.com from your pi? Are you using pm2? What’s in your pm2 log mm

[ReinerZ]

This post is deleted!

[ReinerZ]

This post is deleted!