[MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras

[Cr4z33]

@shbatm I’ve sent you the config link by private chat. ;)

Honestly I don’t want to use MMM-Remote-Control or other solutions but voice control in the end so no I didn’t try.

All I can say is that the issue happens with whatever source I use and the chosen (wrong) stream is ALWAYS random.
If using VLC multiple streams start at the same time while if using OMXplayer a single (wrong) stream is selected.
Last thing I am using your dev version of the module.

You should get the issue if using the same config and modules. :slightly_smiling_face:

[swvalenti]

Switched to VLC but issue is now the stream doesn’t fit window…

[BKeyport]

I recommend in your custom.css file:

.MMM-RTSPStream .innerWrapper {
border: 0;
}

No more border. :)

[costascontis]

i try to use develop branch module with vlc and it works fine but one thing.It crashes after an hour or so ,my Gassist (google assistant) that is running at the same pi.My noobish explanation is that vlc module is taking over mic after some time .If i turn off (comment at config.js) the module ,everything work fine for days.

[kasperb]

@costascontis Interesting… I have the same issue with the RTSP feed cutting out as soon as I activate the Google Assistant (MMM-AssistantMk2). Not sure whether it’s triggered by the mic, my guess is that it’s related to the screen output part of the MMM-AssistantMk2 module.

[Cr4z33]

@shbatm I’ve sent you yesterday a private message with everything you asked me.

Did you find in it anything helpful to fix the issue? :)

[Cr4z33]

@kasperb should be working as intended then.

If not pausing when there’s ie. a streaming playing with audio it could then insert unwanted words into a voice command therefore resulting into a not understandable (by Google Assistant) command.

[kasperb]

@cr4z33 That’s a good point. Should the stream come back up after a few minutes? Right now, I have to refresh the browser (using mmm-remotecontrol) in order for the feed to restart.

[Cr4z33]

@kasperb I actually added some code parts in the voice command module as per suggestion of its developer.

If you’re using MMM-AssistantMk2 then I can tell you what to do (not if using other modules). :)

[costascontis]

i think using this module from develop branch it work decent with vlc but…it is breaking other modules and features and freezing mm from time to time.My backup from pre installing develop branch is working for weeks without a glitch.After installing the module and viewing just one stream ,its a matter of a few hours that something will stuck or mm freeze.I think that upgrading electron and using opengl is not ready for MM yet.

[anthony6608]

@cr4z33 said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

@shbatm I’ve sent you yesterday a private message with everything you asked me.

Did you find in it anything helpful to fix the issue? :)

Did you see his post where he stated he was away working to earn money? :) They do this on their spare time for free and have to make a living somehow. He’s been very good with answering my questions when he is around. I am sure he’ll respond as soon as he returns and has a chance.

[kasperb]

This post is deleted!

[kasperb]

@cr4z33 said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

@kasperb I actually added some code parts in the voice command module as per suggestion of its developer.

If you’re using MMM-AssistantMk2 then I can tell you what to do (not if using other modules). :)

Yes, I’m using MMM-AssistantMk2. Would love to hear your suggestion.

[Cr4z33]

@kasperb in your config.js go to the MMM-AssistantMk2 module and add

			config: {
					onActivate: {
							timer: 0,
							command: "RTSP_DEACTIVATE"
							},
					command: {
							"RTSP_DEACTIVATE": {
										notificationExec: {
													notification: "RTSP-STOP",
													payload: "all"
													}
										}
							}
					}

[kasperb]

@kasperb said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

@cr4z33 said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

@kasperb I actually added some code parts in the voice command module as per suggestion of its developer.

If you’re using MMM-AssistantMk2 then I can tell you what to do (not if using other modules). :)

Yes, I’m using MMM-AssistantMk2. Would love to hear your suggestion.

@Cr4z33 Thank you - this works perfect. Much appreciated.

[Cr4z33]

@kasperb you’re welcome however forgot to say that this was done by @Sean . ;)

[shbatm]

@cr4z33 said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

“RTSP_ACTIVATE”: {
notificationExec: {
notification: “RTSP-PLAY”,
payload: “all”
}
},

Regarding the other issue we’ve been working through – I sent you a chat, but if you have this part in your config with the rest of the TV channels–take it out and see if that fixes the problem you’ve been having with the wrong stream.

I think this is being called by AssistantMk2 after calling the individual stream.

[Cr4z33]

@shbatm thank you mate deleting that part made everything work brilliantly!

[Cr4z33]

So I am having finally some spare time to explain better how to to switch stream by voice control (think at ie. IP cameras, Internet TV/Radio channels, etc.).

We are going to use OMXplayer here (can’t say how it will be the result with VLC honestly…) and the good voice command module MMM-AssistantMk2.
So set it up properly and once you have it up and running come back and go on reading, otherwise contact @Sean (the author of that module) asking for help. :)

Open config.js with a text editor and go to the MMM-AssistantMk2 module section.
Replace

			config: {

with

			config: {
					onActivate: {
							timer: 0,
							command: "RTSP_DEACTIVATE"
							},
					transcriptionHook: {
								"CHANNEL_1": {
										pattern: "TV 1",
										command: "CHANGE_CHANNEL_1"
										},
								"CHANNEL_2": {
										pattern: "TV 2",
										command: "CHANGE_CHANNEL_2"
										},
								"CHANNEL_3": {
										pattern: "TV 3",
										command: "CHANGE_CHANNEL_3"
										},
								"CHANNEL_4": {
										pattern: "TV 4",
										command: "CHANGE_CHANNEL_4"
										},
								"CHANNEL_5": {
										pattern: "Radio 1",
										command: "CHANGE_CHANNEL_5"
										},
								"CHANNEL_6": {
										pattern: "Radio 2",
										command: "CHANGE_CHANNEL_6"
										},
								"CHANNEL_7": {
										pattern: "Radio 3",
										command: "CHANGE_CHANNEL_7"
										}
								},
					command: {
							"CHANGE_CHANNEL_1": {
										notificationExec: {
													notification: "RTSP-PLAY",
													payload: "stream1"
													}
									},
							"CHANGE_CHANNEL_2": {
										notificationExec: {
													notification: "RTSP-PLAY",
													payload: "stream2"
													}
									},
							"CHANGE_CHANNEL_3": {
										notificationExec: {
													notification: "RTSP-PLAY",
													payload: "stream3"
													}
									},
							"CHANGE_CHANNEL_4": {
										notificationExec: {
													notification: "RTSP-PLAY",
													payload: "stream4"
													}
									},
							"CHANGE_CHANNEL_5": {
										notificationExec: {
													notification: "RTSP-PLAY",
													payload: "stream5"
													}
									},
							"CHANGE_CHANNEL_6": {
										notificationExec: {
													notification: "RTSP-PLAY",
													payload: "stream6"
													}
									},
							"CHANGE_CHANNEL_7": {
										notificationExec: {
													notification: "RTSP-PLAY",
													payload: "stream7"
													}
									},
							"RTSP_DEACTIVATE": {
										notificationExec: {
													notification: "RTSP-STOP",
													payload: "all"
													}
									},
					},

Please note that the aforementioned stream names (ie. “TV 1”) used after pattern: HAVE TO BE the same that we will use below in the MMM-RTSPStream module or it won’t work!
Of course they are all examples so fit them to your needs, but remember to use then the same naming.

So let’s go to enter MMM-RTSPStream like the following:

		{
			module: "MMM-RTSPStream",
			position: "bottom_right",
			disabled: false,
			config: {
				autoStart: false, // Streams will start by voice commands only
				rotateStreams: true,
				rotateStreamTimeout: 0,
				shutdownDelay: 0,
				moduleWidth: 420, // Adjust it to your needs
				moduleHeight: 236, // Adjust it to your needs
				localPlayer: 'omxplayer',
				remotePlayer: 'none',
				showSnapWhenPaused: false,
				remoteSnaps: false,
				stream1: {						
						name: 'TV 1',
						url: 'IPofstream1',
						protocol: "tcp",
						frameRate: 'undefined',
						width: 420, // Adjust it to your needs
						height: 236 // Adjust it to your needs
		            		},
				stream2: {						
						name: 'TV 2',
						url: 'IPofstream2',
						protocol: "tcp",
						frameRate: 'undefined',
						width: 420, // Adjust it to your needs
						height: 236 // Adjust it to your needs
		            		},
				stream3: {						
						name: 'TV 3',
						url: 'IPofstream',
						protocol: "tcp",
						frameRate: 'undefined',
						width: 420, // Adjust it to your needs
						height: 236 // Adjust it to your needs
		            		},
				stream4: {						
						name: 'TV 4',
						url: 'IPofstream',
						protocol: "tcp",
						frameRate: 'undefined',
						width: 440, // Adjust it to your needs
						height: 247 // Adjust it to your needs
		            		},
				stream5: {						
						name: 'Radio 1',
						url: 'IPofstream',
						protocol: "tcp",
						frameRate: 'undefined',
						width: 420, // Adjust it to your needs
						height: 236 // Adjust it to your needs
		            		},
				stream6: {						
						name: 'Radio 2',
						url: 'IPofstream6',
						protocol: "tcp",
						frameRate: 'undefined',
						width: 440, // Adjust it to your needs
						height: 247 // Adjust it to your needs
		            		},
				stream7: {						
						name: 'Radio 3',
						url: 'IPofstream7',
						protocol: "tcp",
						frameRate: 'undefined',
						width: 420, // Adjust it to your needs
						height: 236 // Adjust it to your needs
		            		}

This should be all.
You can add as many streams as you want (I don’t see the problem if you run them one by one). ;)

[costascontis]

i am using the develop branch of the module with vlc and latest MM.The feed is playing alright but it seems it is over MM and when i click over another module the feed dissapears going under.How can i solve that?