[MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras

Number_5

Hello
it is a,

DAHUA mini-dome Kamera hd-cvi 2 megapixels für indoor/outdoor g ip7. 30 m nightview fixe objektiv 2,8 mm. - AC/DC-Adapter : AC/DC-Adapter 12V 600mA (port 80)

also i have a Luna Hd
L-KA-2601 1 160,00 160,00
IR Bullet-Kamera (HD-CVI), Full HD,

if i open
http://XXX.xxx,x.xxx:8080/MMM-RTSPStream/config.html
I am denied access

sdetweil

@Number_5 said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

I am denied access

probably have to use the url syntax for userid and password

http://admin:roland!?1971@example.com

http://XXX.xxx,x.xxx:8080/MMM-RTSPStream/config.htm

that is going to the magic mirror port
so, in the config.js do you have
address: “0.0.0.0”,
and
ipWHiltelist:[],

evroom

@Number_5
Try with port 554, see previous post.

And see
https://github.com/shbatm/MMM-RTSPStream
“Using the module” on the config.html part I was referring to.
The IP there, is the MM IP, or localhost, not your cam IP.

evroom

See
https://forum.magicmirror.builders/topic/2743/mmm-rtspstream-video-streaming-from-live-feeds-security-cameras/379

Number_5

Hello

I’m just overwhelmed with the syntax.

http://admin:roland!?1971@example.com
and
http://XXX.xxx,x.xxx:8080/MMM-RTSPStream/config.htm

I’ll try tomorrow and give feedback, thanks for your support

Number_5

@evroom

thats the result with the port 554

pi@raspberrypi:~/MagicMirror/config $ omxplayer --genlog --avdict rtsp_transport:tcp --win 786,424,1138,666 --live --video_queue 4 --fps 30 --no-osd 'rtsp://admin:roland!?1971@192.168.2.108:554/cam/realmonitor?channel=2&subtype=0'
have a nice day ;)
pi@raspberrypi:~/MagicMirror/config $ head -30 omxplayer.log
21:33:25 T:18446744071806154291   DEBUG: DllBcm: Using omx system library
21:33:25 T:18446744071806155602   DEBUG: DllOMX: Using omx system library
21:33:25 T:18446744071806156277   DEBUG: DllAvFormat: Using libavformat system library
21:33:25 T:18446744071806157458 WARNING: Failed to acquire D-Bus name 'org.mpris.MediaPlayer2.omxplayer'
21:33:25 T:18446744071806157567 WARNING: DBus connection failed, trying alternate
21:33:25 T:18446744071806158687   DEBUG: DBus connection succeeded
21:33:25 T:18446744071806159455   DEBUG: Keyboard: DBus connection succeeded
21:33:25 T:18446744071806159602   DEBUG: OMXThread::Create - Thread with id -1387290944 started
21:33:25 T:18446744071806159705   DEBUG: DllAvUtilBase: Using libavutil system library
21:33:25 T:18446744071806159738   DEBUG: DllAvCodec: Using libavcodec system library
21:33:25 T:18446744071806159756   DEBUG: DllAvFormat: Using libavformat system library
21:33:25 T:18446744071806160118   DEBUG: COMXPlayer::OpenFile - avformat_open_input rtsp://admin:roland!?1971@192.168.2.108:554/cam/realmonitor?channel=2&subtype=0
21:33:25 T:18446744071806160518   ERROR: COMXPlayer::OpenFile - avformat_open_input rtsp://admin:roland!?1971@192.168.2.108:554/cam/realmonitor?channel=2&subtype=0
21:33:25 T:18446744071806179771   DEBUG: OMXThread::Run - Exited thread with  id -1387290944
21:33:25 T:18446744071806180025   DEBUG: OMXThread::StopThread - Thread stopped
pi@raspberrypi:~/MagicMirror/config $

Number_5

Hello Sam,
with 0.0.0.0.8080/MMM-rtspStream I was able to open the module configurator.

evroom said:

And see
https://github.com/shbatm/MMM-RTSPStream
“Using the module” on the config.html part I was referring to.
The IP there, is the MM IP, or localhost, not your cam IP.

It means the mirror id is not the raspberry pi?
where can I find the mm id?

evroom

@Number_5

When you run MM locally on your Pi, then your MM IP is your Pi IP.
IP being the IP address, not an id.

When you are able to open the RTSPStream configurator using 0.0.0.0.8080/MMM-rtspStream, then that’s fine.

Continue with step 2 from this post:
https://forum.magicmirror.builders/topic/2743/mmm-rtspstream-video-streaming-from-live-feeds-security-cameras/379

sdetweil

@Number_5 said in [MMM-RTSPStream] - Video Streaming from Live Feeds & Security Cameras:

It means the mirror id is not the raspberry pi?

I don’t see that (mirror id) in the doc for this module

i do see this for testing the camera connection

Testing a camera feed
To test to make sure you have a working url for a camera feed: create a text file with the URL as the first and only line in the file. Save the file as .strm and open the file with a video player like VLC.

unfortuantely I can’t use this module on my dev system as there is no omxplayer…

evroom

@Number_5

One more thing to try. Just leave out the port altogether.
I use it without specifying the port.

omxplayer --genlog --avdict rtsp_transport:tcp --win 786,424,1138,666 --live --video_queue 4 --fps 30 --no-osd 'rtsp://admin:roland!?1971@192.168.2.108/cam/realmonitor?channel=2&subtype=0'