Read the statement by Michael Teeuw here.
After update to Mirror to 2.1.3 - no working Whitlist
-
@d3r said in After update to Mirror to 2.1.3 - no working Whitlist:
address:“0.0.0.0”,
Thanks d3r, this was indeed the solution.
-
@Sandy2503 said in After update to Mirror to 2.1.3 - no working Whitlist:
What do i have to do ???
Set the IP address of your MagicMirror there.
-
This post is deleted! -
@randomnoise said in After update to Mirror to 2.1.3 - no working Whitlist:
@d3r said in After update to Mirror to 2.1.3 - no working Whitlist:
address:“0.0.0.0”,
Thanks d3r, this was indeed the solution.
And how is the syntax?
Something like this?var config = { electronOptions: { }, ipWhitelist: [ "127.0.0.1", "0.0.0.0", "::ffff:127.0.0.1", "::1", "::ffff:192.168.188.42", "192.168.188.1/24", "::ffff:192.168.188.50" ],that does not work for me, before the update my MM was working really fine.
Also MMM-iFrameReload is not working anymore :( -
@fox this doesn’t go within the whitelist section it has to go after the comma at the end of your whitelist section.
It is its own config parameter.
address:“0.0.0.0”,
-
@randomnoise thank you for clarifying.
@roramirez said in After update to Mirror to 2.1.3 - no working Whitlist:
That happens because the release 2.1.3 was introduced a new change to make more secure the MagicMirror, to prevent open all interfaces to world. So, now from 2.1.3 the default values for
addressis localhost instead of 0.0.0.0… so …be careful to set this value.i tried your fix: https://github.com/MichMich/MagicMirror/issues/1036#issuecomment-333243474
now MM crashed. With “pm2 logs mm” only weird errors appear :(
Was that thing with the developer checkout really intended to remain a stable MM? -
I change my config.js in:
/*************** AUTO GENERATED BY REMOTE CONTROL MODULE ***************/ var config = { port: 8081, address:"0.0.0.0", electronOptions: { }, ipWhitelist: [ "127.0.0.1", "::ffff:127.0.0.1", "::1", "192.168.178.20/24" ], language: "de",and now it works again.
I have now access to MMM-Remote-Control from my HomePC again …
Sandy2503
-
@Sandy2503 ok nice to know. My problem, that - as i wrote - that with the “developer checkout” from github my MagicMirror is now broken :(
-
Adding
address: “0.0.0.0”,
to the config.js also did the trick for me.
Thanks!
-
As soon i put “0.0.0.0” to my config (see bellow with empty adress"") i get a black screen on start MM
var config = {
port: 8080,
address:“”,
language: “de”,
timeFormat: 24,
units: “metric”,Any ideas?
-
hi!
maybe wrong config.js ??
here is my working code:
var config =
{
address: “0.0.0.0”,
electronOptions: {}, ipWhitelist: [ "10.0.0.1/24", "::ffff:10.0.0.1/120", "127.0.0.1", "::ffff:127.0.0.1", "::1" ],and so on…
greets
shotput2017 -
is this an acceptable configuration ?
address:"0.0.0.0",or is it better specifying the actual server ip here ?
-
I put my config like this:
{ port: 1103, address: '0.0.0.0', electronOptions: { }, ipWhitelist: [ "127.0.0.1", "::ffff:127.0.0.1", "::1", "::ffff:192.168.113.60", "::ffff:192.168.113.22", "::ffff:192.168.113.97", "::ffff:192.168.113.29", "::ffff:192.168.113.103", "::ffff:192.168.113.66" ],The Remote-Control says “This device is not allowed to acces your mirror”. The IP-Adresses are correct.
-
i have the same problem
i already set “adress” to :“0.0.0.0” and edited the ipwhitelist to
ipWhitelist: [“::fff:0.0.0.0/1”, “::fff:0.8.0.0/1”, “::fff:128.0.0.0/2”, “::fff:192.0.0.0/3”, “::fff:224.0.0.0/4”, “127.0.0.1”, “::ffff:127.0.0.1”, “::1”]
but still i get no access.
Btw. its a raspberry pi zero with serveronly
-
@Niggich For my setup (raspberry pi 2) something changed after the update, but when I changed my IP addresses to the IPv4 notation (remove
::ffff:from your addresses) it worked again. Which format do the blocked addresses have in your logs (see below)?@FreddeHamm Are you sure those CIDR numbers are correct?
When in doubt, check the output or logs (
pm2 logs MagicMirrororpm2 logs mmif you used the old auto starting guide), there should be a line telling you which IP address was received. Also there are a calculators which transform your IP range to the CIDR notation. -
Same here, tried addres 0.0.0.0 and various things in the Whitelist.
A ping gives “destination unreachable”… SSH also doesn’t work.
Can someone please suggest ways to troubleshoot? -
@Nick said in After update to Mirror to 2.1.3 - no working Whitlist:
tried addres 0.0.0.0 and various things in the Whitelist.
Have you tried OUTSIDE your Whitelist, as such:
var config = { port: 8080, address: "0.0.0.0", ipWhitelist: [], // Set [] to allow all IP addresses. -
Thx @Mykle1, indeed I have. See the beginning of my (working) config file below.
What is suspicious to me is that not even a Ping works to that IP, even though I’ve checked it by printing it on the screen of the MM and in the router.
Also, before my Whitelist was a long list of IPs, now I’ve tried the [] option but to no avail…/*************** AUTO GENERATED BY REMOTE CONTROL MODULE ***************/ var config = { address: "0.0.0.0", electronOptions: { }, ipWhitelist: [ ], modules: [ { module: "alert", config: { } }, { module: "updatenotification", position: "top_bar", config: { } }, { module: "MMM-Remote-Control", position: "middle_center", config: { } }, -
@Nick said in After update to Mirror to 2.1.3 - no working Whitlist:
not even a Ping works to that IP
Pinging the mirror’s IP fails? Pinging other devices on your network is successful?
-
Yes, including my personal wiki on another Raspberry Pi, all with 2-5ms
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login