My First Mirror... until now ^^

cruunnerr

Just type a header in the config:

{
    			module: "MMM-EasyPix",
			header: "WLAN-Code",
			position: "bottom_left",
			config: {
				picName: "guest_wifi_config.png", // Enter the picture file name.
				maxWidth: "150px",      // Size picture precisely. Retains aspect ratio.
			}
		},

fischi87

@cruunnerr

ah yes alright, thanks

metalldetector

hi… i have motion detector pir. and a led5050 strip.
can you please provide the software part between pir and led… for dimming and on off feature … pleeeese
thx

cruunnerr

Hey @metalldetector

I already did somewhere in the forum ^^

You need to install PIGPIOD.

sudo apt-get install build-essential python-dev unzip wget

wget http://abyz.me.uk/rpi/pigpio/pigpio.zip && unzip pigpio.zip && cd PIGPIO && sudo make install

Connect the PIR like shown at Part 2.2 and follow the guide:
https://forum.magicmirror.builders/topic/6291/howto-turn-on-off-your-monitor-time-based-pir-button-app?page=1

When creating the pir.py and fill ist with this code:

#!/usr/bin/env python

import sys
import time
import RPi.GPIO as io
import subprocess
import pigpio

io.setmode(io.BCM)
SHUTOFF_DELAY = 119 # seconds
PIR_PIN = 25       # 22 on the board
LED_PIN = 16

def main():
    io.setup(PIR_PIN, io.IN)
    io.setup(LED_PIN, io.OUT)
    turned_off = False
    last_motion_time = time.time()

    while True:
        if io.input(PIR_PIN):
            last_motion_time = time.time()
            io.output(LED_PIN, io.LOW)
            print ".",
            sys.stdout.flush()
            if turned_off:
                turned_off = False
                turn_on()
        else:
            if not turned_off and time.time() > (last_motion_time + 
                                                 SHUTOFF_DELAY):
                turned_off = True
                turn_off()
            if not turned_off and time.time() > (last_motion_time + 1):
                io.output(LED_PIN, io.HIGH)
        time.sleep(.1)

def turn_on():
	subprocess.call("sh /home/pi/monitor_on.sh", shell=True)

def turn_off():
	subprocess.call("sh /home/pi/monitor_off.sh", shell=True)

if __name__ == '__main__':
    try:
        main()
    except KeyboardInterrupt:
        io.cleanup()

For the monitor_on.sh use this:

vcgencmd display_power 1

pigs p 17 1
pigs p 22 1
pigs p 24 1

sleep 0.06s

pigs p 17 2
pigs p 22 2
pigs p 24 2

sleep 0.06s

pigs p 17 3
pigs p 22 3
pigs p 24 3

sleep 0.06s

pigs p 17 4
pigs p 22 4
pigs p 24 4

sleep 0.06s

pigs p 17 5
pigs p 22 5
pigs p 24 5

sleep 0.06s

pigs p 17 6
pigs p 22 6
pigs p 24 5

sleep 0.06s

pigs p 17 7
pigs p 22 7
pigs p 24 6

sleep 0.06s

pigs p 17 8
pigs p 22 8
pigs p 24 7

sleep 0.06s

pigs p 17 9
pigs p 22 9
pigs p 24 8

sleep 0.06s

pigs p 17 10
pigs p 22 10
pigs p 24 9

sleep 0.06s

pigs p 17 11
pigs p 22 11
pigs p 24 10

sleep 0.06s

pigs p 17 12
pigs p 22 12
pigs p 24 11

For monitor_off.sh use this:

pigs p 17 12
pigs p 22 12
pigs p 24 11

sleep 0.06s

pigs p 17 11
pigs p 22 11
pigs p 24 10

sleep 0.06s

pigs p 17 10
pigs p 22 10
pigs p 24 9

sleep 0.06s

pigs p 17 9
pigs p 22 9
pigs p 24 8

sleep 0.06s

pigs p 17 8
pigs p 22 8
pigs p 24 7

sleep 0.06s

pigs p 17 7
pigs p 22 7
pigs p 24 6

sleep 0.06s

pigs p 17 6
pigs p 22 6
pigs p 24 5

sleep 0.06s

pigs p 17 5
pigs p 22 5
pigs p 24 5

sleep 0.06s

pigs p 17 4
pigs p 22 4
pigs p 24 4

sleep 0.06s

pigs p 17 4
pigs p 22 4
pigs p 24 4

sleep 0.06s

pigs p 17 3
pigs p 22 3
pigs p 24 3

sleep 0.06s

pigs p 17 2
pigs p 22 2
pigs p 24 2

vcgencmd display_power 0

sleep 0.06s

pigs p 17 1
pigs p 22 1
pigs p 24 1

sleep 0.06s

pigs p 17 0
pigs p 22 0
pigs p 24 0

Hope that helps. Try to find your best way and ask, if u need more help :)

Edit:
Oh and u need to start Pigpio on reboot with rc.local. ;)

swvalenti

If you told me that your background wasn’t a stock photo I would upvote this! Nice work!

cruunnerr

Well, meanwhile i changed my background, but still love it :P

Bild Text

metalldetector

@c:face_with_steam_from_nose: ruunnerr ok that works…
-What ist the Funktion of LED_PIN = 16 .
Only one pin …
Do I need RGB pins in the script?

-And then the led stripe start it’s flickering…
Thx4yourhelp

cruunnerr

LED-Pin just shows, if the PIR detects motion. You don’t need to use it.

The pir.py script starts the other shell scripts when motion is detected.

So all commands for the RGB-Stripe are within the shell scripts (monitor_on / off.sh).
And as u can see, i used GPIO 17,22 and 24.
17 = red
22 = green
24 = blue

To control the LEDs i used PIGPIOD and it’s commands, as i wrote.

So after installing PIGIOD u can start it with:
sudo pigpiod

Commands like pigs p 22 128 will set green to 50%.
pigs p 24 255 will set blue to 100%

in the shell script i fade all colors from 1 to 12% with sleeps.

Edit:

As i wrote before u need to Autostart pigpiod via rc.local.

sudo nano /etc/rc.local

Mine looks like this:

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

# Print the IP address
_IP=$(hostname -I) || true
if [ "$_IP" ]; then
  printf "My IP address is %s\n" "$_IP"
fi

iwconfig wlan0 power off &

sleep 5 &

/usr/local/bin/pigpiod

sleep 10 &

/usr/bin/python /home/pi/pir.py &

exit 0

metalldetector

@cruunnerr ok I think this is the right way and I understand it with the led pin on Pin16
… Just the flickering looks not good… I try a other power consumption…

…can I only fade the LEDs or can I make a light like a animation around my mirror?

Thanks for your help … And so fast.

This is a good forum for me…

Thx to all guys

cruunnerr

Well, if i had to do that project gain, i would not choose the RGB-5050 stripes again…

I would directly get WS2812, because u just need one PWM Pin and with that you were able to do things like animations…

In another project (infinity table) i choosed this one and was pretty amused :)

https://youtu.be/IcDjzh03W-4