My First Mirror... until now ^^

yawns

@nikobelohlav said in My First Mirror... until now ^^:

how did you add the backround (THE GIRL)?

Like this: https://forum.magicmirror.builders/topic/351/add-a-background-image

barnosch

Sieht super aus!
Vergess bloß nicht die Fusselrolle zu kaufen ;)

cruunnerr

Thanks for the compliments.

You can add a background with your custom.css like the link u posted, yawns.

My custom.css looks like this:

/*****************************************************
 * Magic Mirror                                      *
 * Custom CSS                                        *
 *                                                   *
 * By Michael Teeuw http://michaelteeuw.nl           *
 * MIT Licensed.                                     *
 *                                                   *
 * Add any custom CSS below.                         *
 * Changes to this files will be ignored by GIT. *
 *****************************************************/

 body {
	background-image: url("background9.jpg");
	background-size: cover;
	margin-left: 0px;
	margin-right: 30px;
	margin-top: 15px;
	margin-bottom: 15px;
  	position: absolute;
  	height: calc(100% - 28px);
  	width: calc(100% - 22px);
}
.MMM-SystemStats  {
        color: #CEF6CE;
        } 
.MMM-MyCalendar {
  max-width: 300px;
}

The image is called “background9.jpg” and has been placed in the “home/pi/MagicMirror/css” folder.

I needed to play a little bit with the margin’s, until it fits perfect. Keep in mind that your picture should fit the screen resolution. It shouldn’t be smaller. if it is, you should take a look at the MMM-ProfilePicture module.

@nikobelohlav
I just used the MMM-PIR module for it. It turns the HDMI signal off, and my monitor recognized that via HDMI-CEC/ARC and turns off. When the signal comes back the motor turns on within 2 seconds. thats quick enough i think.
I don’t know if it is possible to change the MMM-Pir-Sensor.js so that not the command “tvservice …” is executed, but a notification will be sent to other modules like the profile-switcher. Maybe you should open a new thread, even if I don’t quite understand why you don’t want to turn off your monitor.

The scrobbler module was a little bit tricky. First you need to register your apps, to share the current playing music with last.fm.
I actually just use Spotify, so in the Spotify-settings of my phone, tablet and macbook i needed to login to last.fm via the Spotify app.
Sometimes i got the same problem as you, but its not a failure of the module. I played music and checked on last.fm if there is actually scribbling something, but there wasn’t. Then i turn back to my Spotify app and just log out and log in again (to last.fm in the Spotify settings) and that brings the scrobbling back.
So its more a bug, that happens sometimes, cause Spotify didn’t correctly streams to last.fm i think.
When u don’t pause the music it should scrobble continuous.

Also keep in mind:

When is a scrobble a scrobble?
A track should only be scrobbled when the following conditions have been met:

The track must be longer than 30 seconds.
And the track has been played for at least half its duration, or for 4 minutes (whichever occurs earlier.)
As soon as these conditions have been met, the scrobble request may be sent at any time. It is often most convenient to send a scrobble request when a track has finished playing.

@barnosch
Ja im Winter ist es manchmal schlimm mit den Hundis ^^

doubleT

I really like how you integrated the motion sensor! The rest is a little bit too much “screen” (as opposed to mirror) for me, but I can see the appeal. I like it.

cruunnerr

@doubleT said in My First Mirror... until now ^^:

The rest is a little bit too much “screen” (as opposed to mirror) for me, but I can see the appeal.

i know what you mean ^^
But since i found out how many things can be shown with the MM, i couldn’t let it be :D
Maybe the background is “too much”, but i like it anyhow XD
but if i turn on the room lights, its bright enough to use it as a mirror :P

Mykle1

@cruunnerr said in My First Mirror... until now ^^:

Maybe the background is “too much”, but i like it anyhow XD

Whatever you like is how your mirror should be.

Again, well done, mate. :-)

Peace

cruunnerr

Very tinkered cause i am experimenting a lot ^^

fischi87

Hello, is a really awesome mirror really!!!

one question, how can i get the header over the qr code picture?

thanks

cruunnerr

@fischi87

Just type a header in the config:

{
    			module: "MMM-EasyPix",
			header: "WLAN-Code",
			position: "bottom_left",
			config: {
				picName: "guest_wifi_config.png", // Enter the picture file name.
				maxWidth: "150px",      // Size picture precisely. Retains aspect ratio.
			}
		},

fischi87

@cruunnerr

ah yes alright, thanks

metalldetector

hi… i have motion detector pir. and a led5050 strip.
can you please provide the software part between pir and led… for dimming and on off feature … pleeeese
thx

cruunnerr

Hey @metalldetector

I already did somewhere in the forum ^^

You need to install PIGPIOD.

sudo apt-get install build-essential python-dev unzip wget

wget http://abyz.me.uk/rpi/pigpio/pigpio.zip && unzip pigpio.zip && cd PIGPIO && sudo make install

Connect the PIR like shown at Part 2.2 and follow the guide:
https://forum.magicmirror.builders/topic/6291/howto-turn-on-off-your-monitor-time-based-pir-button-app?page=1

When creating the pir.py and fill ist with this code:

#!/usr/bin/env python

import sys
import time
import RPi.GPIO as io
import subprocess
import pigpio

io.setmode(io.BCM)
SHUTOFF_DELAY = 119 # seconds
PIR_PIN = 25       # 22 on the board
LED_PIN = 16

def main():
    io.setup(PIR_PIN, io.IN)
    io.setup(LED_PIN, io.OUT)
    turned_off = False
    last_motion_time = time.time()

    while True:
        if io.input(PIR_PIN):
            last_motion_time = time.time()
            io.output(LED_PIN, io.LOW)
            print ".",
            sys.stdout.flush()
            if turned_off:
                turned_off = False
                turn_on()
        else:
            if not turned_off and time.time() > (last_motion_time + 
                                                 SHUTOFF_DELAY):
                turned_off = True
                turn_off()
            if not turned_off and time.time() > (last_motion_time + 1):
                io.output(LED_PIN, io.HIGH)
        time.sleep(.1)

def turn_on():
	subprocess.call("sh /home/pi/monitor_on.sh", shell=True)

def turn_off():
	subprocess.call("sh /home/pi/monitor_off.sh", shell=True)

if __name__ == '__main__':
    try:
        main()
    except KeyboardInterrupt:
        io.cleanup()

For the monitor_on.sh use this:

vcgencmd display_power 1

pigs p 17 1
pigs p 22 1
pigs p 24 1

sleep 0.06s

pigs p 17 2
pigs p 22 2
pigs p 24 2

sleep 0.06s

pigs p 17 3
pigs p 22 3
pigs p 24 3

sleep 0.06s

pigs p 17 4
pigs p 22 4
pigs p 24 4

sleep 0.06s

pigs p 17 5
pigs p 22 5
pigs p 24 5

sleep 0.06s

pigs p 17 6
pigs p 22 6
pigs p 24 5

sleep 0.06s

pigs p 17 7
pigs p 22 7
pigs p 24 6

sleep 0.06s

pigs p 17 8
pigs p 22 8
pigs p 24 7

sleep 0.06s

pigs p 17 9
pigs p 22 9
pigs p 24 8

sleep 0.06s

pigs p 17 10
pigs p 22 10
pigs p 24 9

sleep 0.06s

pigs p 17 11
pigs p 22 11
pigs p 24 10

sleep 0.06s

pigs p 17 12
pigs p 22 12
pigs p 24 11

For monitor_off.sh use this:

pigs p 17 12
pigs p 22 12
pigs p 24 11

sleep 0.06s

pigs p 17 11
pigs p 22 11
pigs p 24 10

sleep 0.06s

pigs p 17 10
pigs p 22 10
pigs p 24 9

sleep 0.06s

pigs p 17 9
pigs p 22 9
pigs p 24 8

sleep 0.06s

pigs p 17 8
pigs p 22 8
pigs p 24 7

sleep 0.06s

pigs p 17 7
pigs p 22 7
pigs p 24 6

sleep 0.06s

pigs p 17 6
pigs p 22 6
pigs p 24 5

sleep 0.06s

pigs p 17 5
pigs p 22 5
pigs p 24 5

sleep 0.06s

pigs p 17 4
pigs p 22 4
pigs p 24 4

sleep 0.06s

pigs p 17 4
pigs p 22 4
pigs p 24 4

sleep 0.06s

pigs p 17 3
pigs p 22 3
pigs p 24 3

sleep 0.06s

pigs p 17 2
pigs p 22 2
pigs p 24 2

vcgencmd display_power 0

sleep 0.06s

pigs p 17 1
pigs p 22 1
pigs p 24 1

sleep 0.06s

pigs p 17 0
pigs p 22 0
pigs p 24 0

Hope that helps. Try to find your best way and ask, if u need more help :)

Edit:
Oh and u need to start Pigpio on reboot with rc.local. ;)

swvalenti

If you told me that your background wasn’t a stock photo I would upvote this! Nice work!

cruunnerr

Well, meanwhile i changed my background, but still love it :P

Bild Text

metalldetector

@c:face_with_steam_from_nose: ruunnerr ok that works…
-What ist the Funktion of LED_PIN = 16 .
Only one pin …
Do I need RGB pins in the script?

-And then the led stripe start it’s flickering…
Thx4yourhelp

cruunnerr

LED-Pin just shows, if the PIR detects motion. You don’t need to use it.

The pir.py script starts the other shell scripts when motion is detected.

So all commands for the RGB-Stripe are within the shell scripts (monitor_on / off.sh).
And as u can see, i used GPIO 17,22 and 24.
17 = red
22 = green
24 = blue

To control the LEDs i used PIGPIOD and it’s commands, as i wrote.

So after installing PIGIOD u can start it with:
sudo pigpiod

Commands like pigs p 22 128 will set green to 50%.
pigs p 24 255 will set blue to 100%

in the shell script i fade all colors from 1 to 12% with sleeps.

Edit:

As i wrote before u need to Autostart pigpiod via rc.local.

sudo nano /etc/rc.local

Mine looks like this:

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

# Print the IP address
_IP=$(hostname -I) || true
if [ "$_IP" ]; then
  printf "My IP address is %s\n" "$_IP"
fi

iwconfig wlan0 power off &

sleep 5 &

/usr/local/bin/pigpiod

sleep 10 &

/usr/bin/python /home/pi/pir.py &

exit 0

metalldetector

@cruunnerr ok I think this is the right way and I understand it with the led pin on Pin16
… Just the flickering looks not good… I try a other power consumption…

…can I only fade the LEDs or can I make a light like a animation around my mirror?

Thanks for your help … And so fast.

This is a good forum for me…

Thx to all guys

cruunnerr

Well, if i had to do that project gain, i would not choose the RGB-5050 stripes again…

I would directly get WS2812, because u just need one PWM Pin and with that you were able to do things like animations…

In another project (infinity table) i choosed this one and was pretty amused :)

https://youtu.be/IcDjzh03W-4

metalldetector

Yes. But what is the difference between WS2812, WS2812, neopixel…
What is the best stripe with a good price…
I think a meter for 60 euro is to much…

Greetings from Saxony, Germany

cruunnerr

https://de.aliexpress.com/item/1m-2m-3m-4m-5m-ws2812b-ws2812-led-strip-individually-addressable-smart-led-strip-black-white/32682015405.html?spm=a2g0x.search0104.3.9.4eef3dc9EKAZdz&ws_ab_test=searchweb0_0,searchweb201602_3_10065_10068_10547_319_317_10548_10696_10084_453_10083_454_10618_10304_10307_10820_10821_537_10302_536_10843_10059_10884_10887_321_322_10103,searchweb201603_6,ppcSwitch_0&algo_expid=b24b32fc-d347-41f0-b20b-702e47e2d79c-1&algo_pvid=b24b32fc-d347-41f0-b20b-702e47e2d79c&transAbTest=ae803_3

I have got this one. 5m with 60 LEDs per meter for about 17€