Downgrade Magic Mirror?

chaseb1357

@cowboysdude Thank you so much, it worked like a charm. After successfully welding an enclosure together to put the dynamite and RPi, I set it off. And BOOM! Magic Mirror is now running like a charm ;)

MichMich

Just curious. Why do you want to downgrade?

chaseb1357

@MichMich The only reason for me is I really love the ability to use the Remote Control module so I can easily remote access my mirrors. And I noticed in the new update that Http isn’t working, so I just want to go back to where I can remote access my mirrors.

cruunnerr

strange… i use the actual version and remote control is working. i even updated the mirror with the remote control module XD worked fine :)

chaseb1357

@cruunnerr that is strange indeed. I’m not sure what’s going on with my setup then. I mainly made this post because I discovered this one researching before posting: https://forum.magicmirror.builders/topic/5025/can-t-access-magic-mirror-via-http

cruunnerr

well, i allowed to listen to all ip’s at all:

var config = {
        address: "0.0.0.0", // Address to listen on, can be:
                              // - "localhost", "127.0.0.1", "::1" to listen on lo$
                              // - another specific IPv4/6 to listen on a specific$
                              // - "", "0.0.0.0", "::" to listen on any interface
                              // Default, when address config is left out, is "loc$
        port: 8080,
        ipWhitelist: [], // Set [] to allow all IP addresses
                                                               // or add a specifi$
                                                               // ["127.0.0.1", ":$
                                                               // or IPv4 range of$
                                                               // ["127.0.0.1", ":$

Maybe thats the reason. I had a few problems with just allowing single ip dresses so i went to this option. But works fine, and i have a hardware firewall installed in my network so i hope that this is enough^^

for external access i use VPN

chaseb1357

Well what do you know. It works now! My old code was this and it worked fine on older versions:

	"ipWhitelist": [
		"127.0.0.1",
		"::ffff:127.0.0.1",
		"::1",
		"192.168.11.1/24",
		"::ffff:192.168.11.1/24" 
	]

But now that I put this it works fine, no need to downgrade now, much thanks:

	"address": "0.0.0.0",
	"ipWhitelist": [
	]

cruunnerr

great :)

first i tried it with “192.168.178.0/24”, too but couldn’t get it work. i read something about disabling IPv6 would help etc.

but however i am glad u got it working

cowboysdude

@chaseb1357 said in Downgrade Magic Mirror?:

@cowboysdude Thank you so much, it worked like a charm. After successfully welding an enclosure together to put the dynamite and RPi, I set it off. And BOOM! Magic Mirror is now running like a charm ;)

HAHAHAHHHAHAHA Actually I just put 2.10 back on mine because well it works… LOL

Kastore

Yes i know this topic is old, but it is spot on what i look for.

How do I downgrade to an older version.

I cant find any git pullcommand and the copy and paste and keep getting errors…

2.3 worked like a charm and 2.4 keeps producing errors for me that I cant fix due to my lack of knowledge