Want to turn off my monitor

randomnoise

For simple time based screen on & off check https://github.com/ianperrin/MMM-ModuleScheduler

randomnoise

Sorry, should say you combine with the remote control module to send screen off notifications.

robmcc83

So I’ve been looking through the net and have found I can use vcgencmd display_power 0 to turn off my monitor and the same again to power 1 to turn it back on, it also explains it can be run as a cron job but I’ve never done one of them so not to sure.
Would it all be possible to hook up a push button switch to the gpio and have them commands somehow turn the display off and on.
Thanks

doubleT

Don’t forget that the monitor will still be on, it’s just in standby, still consuming power. The Pi can’t switch the power of the monitor itself off.

robmcc83

Yeah cheers I’m aware of that, it’s just monitor uses 37w whilst on and 2w in standby so I really don’t mind it being in standby at night.
I think I’m going to look into mmm-remote as trying the other method using vgenmcd power makes my screensaver come back to life even though it’s Been disabled for the last 8 months.
Is there any tutorials anywhere in setting up mmm-schedule and mmm-remote.
Cheers all

robmcc83

Ok so after trying various ways to get my monitor to turn off I have still been unsuccessful.
What I am trying now is with a webcam.
I found in my box of computer bits a Microsoft lifecam hd 3000.
After a little Google research I can confirm the webcam works with the pi using motion software.
I also found a site explaining how I can add a start and and event on detection so I set vgencmd display_power 1 as start event and vgencmd display_power 0 as end event but still no luck it just keeps display on but if I enter the command in terminal my display turns on/off as it should.
Am I going about this in the most awkward way or is there a simple way to get the monitor to sleep using the usb webcam.
Thanks in advance

Mykle1

@robmcc83

You could try this for ON

if (something) {
exec("/opt/vc/bin/tvservice -o", null); }

And this for OFF

{ exec("/opt/vc/bin/tvservice --preferred && sudo chvt 6 && sudo chvt 7", null); }

Or

{ exec('xset dpms force on', null); }
{ exec('xset dpms force off', null); }

cruunnerr

did u try:

sudo tvservice -o to turn off your Monitor
sudo tvservice -p to turn on your monitor
?

If this isn’t working i think your Monitor or your HDMI Cable are not supporting CEC.

If this works u have several options.
For example u can create two *.sh files and make them executable. Put these scripts into cronjob file for time based turning on or off the monitor.
Or u can use a PIR or a simple Button to do that. Let me give you a small software tutorial for this example:

Tutorial beginning:

cd
nano monitor_on.sh (creates the file)

write this in this file:

sudo tvservice -p

save with “ctrl+x” and say “y” to save the file.

nano monitor_off.sh

write this in this file:

sudo tvservice -o

save with “ctrl+x” and say “y” to save the file.

chmod +x monitor_on.sh (to make it executable)
chmod +x monitor_off.sh

So now you have two options. Write a python script to automatically start the shell scripts by using a GPIO or just put the Shell scripts into a cronjob.

Here is the first way:

nano pir.py (creates a script which executes the *.sh files via PIR or Button)

write this into the file:

#!/usr/bin/env python

import sys
import time
import RPi.GPIO as io
import subprocess

io.setmode(io.BCM)
SHUTOFF_DELAY = 119 # in seconds, how long the monitor will be on until next button press or PIR detection
PIR_PIN = 25       # 22 on the board (this needn't to be a PIR. Can be a button also)
LED_PIN = 16      # optional

def main():
    io.setup(PIR_PIN, io.IN)
    io.setup(LED_PIN, io.OUT)
    turned_off = False
    last_motion_time = time.time()

    while True:
        if io.input(PIR_PIN):
            last_motion_time = time.time()
            io.output(LED_PIN, io.LOW)
            print ".",
            sys.stdout.flush()
            if turned_off:
                turned_off = False
                turn_on()
        else:
            if not turned_off and time.time() > (last_motion_time + 
                                                 SHUTOFF_DELAY):
                turned_off = True
                turn_off()
            if not turned_off and time.time() > (last_motion_time + 1):
                io.output(LED_PIN, io.HIGH)
        time.sleep(.1)

def turn_on():
	subprocess.call("sh /home/pi/monitor_on.sh", shell=True)

def turn_off():
	subprocess.call("sh /home/pi/monitor_off.sh", shell=True)

if __name__ == '__main__':
    try:
        main()
    except KeyboardInterrupt:
        io.cleanup()

save with “ctrl+x” and say “y” to save the file.

chmod +x pir.py

You can check if your button works by simply typing python pir.py. Every time u move through the PIR or press the button it will show you some …
End the test with “ctrl+c”

now we editing the rc.local to start the script after booting the Pi:

sudo nano /etc/rc.local

write this in the file (above the “exit 0”):

python /home/pi/pir.py &

save with “ctrl+x” and say “y” to save the file.

after all it should look like this:

#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

# Print the IP address
_IP=$(hostname -I) || true
if [ "$_IP" ]; then
  printf "My IP address is %s\n" "$_IP"
fi

python /home/pi/pir.py

exit 0

Here comes the second way:

Next steps we will do as root to be sure it works. Maybe not the best way, but i am just a simple guy, who is still learning the stuff. ^^
Lets say we want to turn on the monitor every day at 6am and turn off at 8pm:

sudo nano /etc/crontab (to open the crontab)

write this into the file:
0 6 * * * /home/pi/monitor_on.sh
0 20 * * * /home/pi/monitor_off.sh

this should look like this:

# /etc/crontab: system-wide crontab
# Unlike any other crontab you don't have to run the `crontab'
# command to install the new version when you edit this file
# and files in /etc/cron.d. These files also have username fields,
# that none of the other crontabs do.

SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin

# m h dom mon dow user  command
17 *    * * *   root    cd / && run-parts --report /etc/cron.hourly
25 6    * * *   root    test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily )
47 6    * * 7   root    test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.weekly )
52 6    1 * *   root    test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.monthly )
0 6     * * *   root      /home/pi/monitor_on.sh
0 20    * * *   root      /home/pi/monitor_off.sh
#

I wrote this just out of my head so i hope i didn’t forget anything.

Tutorial ending!

That is just an example of using a GPIO to turn off and on your monitor via HDMI-CEC.
How i said, if your monitor or cable doesn’t support this u need to choose another way (turn a relays on and off to the power supply of the monitor e.g.)

edit:

sorry @mykle1, did not notice that you already answered, because I already started to write while you answered :D

Mykle1

@cruunnerr

No worries, mate. I hope to learn something from your answer. (which is totally amazing to me)

Peace!

robmcc83

Thanks this is very useful information that I didn’t know before.
I have issued the sudo tvservice -o command and it did indeed shut down my monitor.
But what I am trying at the moment is to have it shutdown and wakeup the monitor with a usb webcam now.
That’s what I’m struggling with.
Cheers