Read the statement by Michael Teeuw here.
Rpi3 freezes after a few houres
-
You may have more than one instance of MM running. That seems to be common recently. Please see the instructions here to check and correct. 7th, 8th and 9th post
https://forum.magicmirror.builders/topic/6249/something-is-wrong/7
-
I checked this, unfortunately I’m not running two instances. The second one is a service needed by the Sonos Module.
It seams to me that there a few people which having problems since 2.2.2?pi@MagicMirror:~ $ pm2 status ?????????????????????????????????????????????? ? Name ? mode ? status ? ? ? cpu ? memory ? ?????????????????????????????????????????????? ? mm ? fork ? online ? 0 ? 0% ? 1.3 MB ? ? sonos ? fork ? online ? 0 ? 0% ? 1.3 MB ? ?????????????????????????????????????????????? Use `pm2 show ` to get more details about an app pi@MagicMirror:~ $ -
Indeed, but not all users have the same troubles, and not for the same reasons. Anyway . . .
Have you tried running only the default modules to see if the problem still occurs? If it does not, add them one by one, or in pairs, until you experience a problem so you can isolate the issue.
If you are unfortunate and the problem arises before the addition of 3rd party modules then that is another matter altogether.
-
@Mykle1 said in Rpi3 freezes after a few houres:
Have you tried running only the default modules to see if the problem still occurs? If it does not, add them one by one, or in pairs, until you experience a problem so you can isolate the issue.
This is what I did recently. It wasn’t the pi freezing but the browser on the pi, I am running the mirror on a server. It turned out to be a pi-hole module for me.
-
@barrysmallgoods said in Rpi3 freezes after a few houres:
It turned out to be a pi-hole module for me.
Well done, mate! :-)
-
@Mykle1 said in Rpi3 freezes after a few houres:
Have you tried running only the default modules to see if the problem still occurs? If it does not, add them one by one, or in pairs, until you experience a problem so you can isolate the issue.
Ok, this is what I try now. Thank you for your help!
-
Just to let you know: In my case it was the MMM-iHaveBeenThere module which caused the trouble.
