MMM-Domiticz

jaminben

I updated and adding the config option ‘textWhite: true,’ but it doesn’t appear to work… any ideas?

Charley

Made a small change it should work now

jaminben

This post is deleted!

jaminben

@Charley said in MMM-Domiticz:

textWhite:true

All working great now… many thanks for taking the time to look at this for me :)

Peter

Maybe a stupid question; do I have to make the changes in MM config.js file or in Domoticz.js file?
Peter

Charley

@Peter there are no stupid questions

You should make the changes in the MagicMirror config.js file, if you make them in the MMM-Domoticz.js they will be gone in the next updates.

In the MMM-Domoticz.js that are the default values if you don’t put it in the MM config.js file the value from the module will be used.

Good luck

Peter

Sorry, Charley, I deleted Domoticz folder, installed again and now I have a problem:

How can I solve this?
Peter

Charley

@peter
I am sorry this happend. i flip the screen if you have the app on the left side. the L should point the otherway as well. I try to fix it on monday or tuesday. However is quick fix is putting the module op the right side in the config

Peter

@Charley thanks.
I will wait for the fix!
No hurry.
Peter

Charley

@Peter made an update this morning.

The grouping must be set now and is not a default.
If you like the same sensor with different values grouped add

groupSensors: true

To config.js for the module and the sensors will be grouped. However if the module is placed on a left position the hook └─ (right) ─┘(left) sometimes shows unexpected behavior.

Charley

To make the Domoticz System better I have made a WiFi Thermometer that is extremely precise. It is based on an infrared Non-touch sensor module. If you want to control devices this may be a good solution.
Available on gitHub WiFi highly precise thermometer

DavA

I cant see anything but temperature? No status on switches ON or OFF.
Also is it possible to not show all my temperature-sensors?

Thanks

Charley

It shows only devices at are switched on.

Smotx

Hi,

Thx for this module.

How to exclude Xiaomi doors sensors ?

Thx for help.

Charley

Today added support for p1 Smart meters

first update your module

cd MagicMirror/modules/MMM-Domoticz
git pull
pm2 restart MagicMirror

Add these 2 lines to the config file

smartMeter:  true,
smartMeterOffset: 0

You may need a commy behind the 0 from smartMeterOffset
The offset you use if the meter wasn’t zero when you moved in or if you want to show total per year of month

Charley

@Smotx

excluding can be done by adding the device names in the excludeDevices array in your config.js file

Awn

Hi,

First of all, thank you for the hard work on those modules.

I’m nex to the MM world, and in the linux world in global, and it seems that I won’t be able to make it without your help.
The module shows “Loading Domoticz data…” and seems to never get them…

My config.js contains this :

 {
                        module: "MMM-Domoticz",
                        position: "bottom_right", 
                        config:
                                {
                                updateInterval: 20,
                                apiBase: "https://192.168.**.***",
                                apiPort: 443,
                                apiUser: "**********",
                                apiPw: "*********",
                                moduleTitle: "Domoticz",
                                temperatureTitle: "Températures dans la maison",
                                subMenus: true,
                                showItems: ['temperature', 'humidity'],
                                textWhite: false,
                                groupSensors: true,
                                }
                },

Sadly, it seems that the pi running the MM isn’t getting an answer from the pi running Domoticz.

I tried the url access from my browser:
https://192.168..*/json.htm?type=devices&filter=all&used=true&order=Name

I obtain a return with the different systems connected (RFXCom, Zwave, hue…)

Can somebody guide me throught this please?

Thanx !

Regards,
Awn

Pl4nk

This post is deleted!

sdetweil

@Awn on the magicmirror, using the keyboard, open the developers window, ctrl-shift-i,
select the tab labeled console, on the window that opens, scroll up to see any errors

u may also have to look in the terminal window log for errors from the node_helper

these will be in the pm2 logs if using pm2.

do

pm2 logs --lines=100

Jo-Rien

I am not getting a neat list with this module, all readings from my temperature meters is shown on two lines and it’s kinda messing up the screen. Any idea what the problem is?