MMM-ResRobot - Public transport information for Sweden

Alvinger

Yes, I think I know what the issue is. Currently, only one section is supported due to the fact that the node helper only supports one set of data. As the daily request limits for ResRobot bronze are a bit low I try to cache data and reduce the number of calls as much as possible. And one of the design decisions I made was to only do one section. (You can have multiple routes in the same section which is my use case)

However, I do realize the need for multiple sections and it is on my todo list. Unfortunately I’been bitten by the home automation bug and haven’t spent so much time on MagicMirror lately So there is no ETA for it.

leanro

@Alvinger Thanks for the quick answer! Now I know at least what the problem was/is.
Good luck for other projects!

jocke.almgren

Hi

I hope this forum still is active ;)

I just started my Magic Mirror project, and of course i need bus departures to be on the mirror.
But i can’t figure out why it never shows on the screen… it’s not the whole screen that is black, the ResRobot module just doesn’t show.
this is my config.js

			{
			module: "MMM-ResRobot",
			position: "top_center",
			header: "Departures",
			config: {
				routes: [
					{from: "740054292", to: "740040961"},
					{from: "740053855", to: "740010956"}
				],
				skipMinutes: 0,
				maximumEntries: 6,
				truncateAfter: 5,
				apiKey: "XXXXXX"
			}

Any help so much appreciated

Alvinger

@jocke-almgren just to make sure: you have registered for an API key at Trafiklab?

jocke.almgren

@Alvinger Hi - thanks for your reply. Turns out i was a total idiot and placed the module in the “modules/default” directory instead of the modules root :man_facepalming: Moved the folder and all is good.
Thanks for the support anyways

sweup

Hi, how do i update?, i tried
cd ~/MagicMirror/modules/MMM-ResRobot
git pull
npm install

But frontend still says a newer update is found…

sdetweil

@sweup what was the output of git pull?

Alvinger

@sweup did you restart the MagicMirror service after you updated?

sweup

@sdetweil - I only got this

pi@raspberrypi:~ $ cd ~/MagicMirror/modules/MMM-ResRobot
pi@raspberrypi:~/MagicMirror/modules/MMM-ResRobot $ git pull
Updating 1618fcc..695f70d
error: Your local changes to the following files would be overwritten by merge:
	package.json
Please commit your changes or stash them before you merge.
Aborting
pi@raspberrypi:~/MagicMirror/modules/MMM-ResRobot $ npm install
npm WARN npm npm does not support Node.js v10.21.0
npm WARN npm You should probably upgrade to a newer version of node as we
npm WARN npm can't make any promises that npm will work with this version.
npm WARN npm Supported releases of Node.js are the latest release of 4, 6, 7, 8, 9.
npm WARN npm You can find the latest version at https://nodejs.org/
up to date in 1.083s
pi@raspberrypi:~/MagicMirror/modules/MMM-ResRobot $

@Alvinger - I did a sudo reboot

Alvinger

@sweup it seems you have changed the file package.json

Stash it away with “git stash” and try the update again.

sweup

@Alvinger said in MMM-ResRobot - Public transport information for Sweden:

git stash

Like this?

cd ~/MagicMirror/modules/MMM-ResRobot
git stash
npm install

Edit:misspell

Alvinger

@sweup
git stash
git pull
npm install

sweup

@Alvinger - hmm something email adress. Any advice?

pi@raspberrypi:~ $ cd ~/MagicMirror/modules/MMM-ResRobot
pi@raspberrypi:~/MagicMirror/modules/MMM-ResRobot $ git stash

*** Please tell me who you are.

Run

  git config --global user.email "you@example.com"
  git config --global user.name "Your Name"

to set your account's default identity.
Omit --global to set the identity only in this repository.

fatal: unable to auto-detect email address (got 'pi@raspberrypi.(none)')
Cannot save the current index state
pi@raspberrypi:~/MagicMirror/modules/MMM-ResRobot $ git pull
Updating 1618fcc..695f70d
error: Your local changes to the following files would be overwritten by merge:
	package.json
Please commit your changes or stash them before you merge.
Aborting
pi@raspberrypi:~/MagicMirror/modules/MMM-ResRobot $ npm install
npm WARN npm npm does not support Node.js v10.21.0
npm WARN npm You should probably upgrade to a newer version of node as we
npm WARN npm can't make any promises that npm will work with this version.
npm WARN npm Supported releases of Node.js are the latest release of 4, 6, 7, 8, 9.
npm WARN npm You can find the latest version at https://nodejs.org/
up to date in 1.02s

sdetweil

@sweup let’s find out what u changed
do

git diff

sweup

@sdetweil - sry I’m a bit lost, do I do “git diff” after?

cd ~/MagicMirror/modules/MMM-ResRobot
git stash
git pull
npm install

sdetweil

@sweup git stash fails cause u are not registered to git on your machine
git pull fails cause it would overwrite a change u.made to package.json

so, I was trying to find out what the change was, and how important it is…

the other commands won’t work til we resolve the diff(erence) issue

sweup

@sdetweil @Alvinger - thx guys, after

$ git config --global user.email "you@example.com" 
$ git config --global user.name "Your Name"

I could solve it with git stash

sdetweil

@sweup yeh, but we don’t know what change u lost/stashed

Alvinger

@sdetweil @sweup
My guess is that it is an unintended change probably caused by saving rather than exiting when viewing the file.
Anyway, package.json only contains information about the module and can without issue be replaced with a “git pull”.

@sweup Great that you solved it. A small suggestion for the future: as most modules (and MagicMirror itself) uses Github you should read up on GIT and its basic commands. It will make life easier for you!

Alvinger

@sweup I just pushed a minor update with some new options. Feel free to try the new version out.