MMM-ResRobot - Public transport information for Sweden

Notumlord

Awesome, i’ve been looking for something like this but was unable to code it myself, i’ll try it once i get home.
Could you also write a module for Västtrafiks API which would show next departure for a given stop?

https://developer.vasttrafik.se/portal/#/

Alvinger

Thanks.

Västtrafik is actually already covered by ResRobot. Just look up the stop id at Trafiklab (see README.md for instructions) and you’re ready to go!

Notumlord

Unfortently i can’t get it to work, all i get is a black screen when i load the mirror.

This is my config:

{
    module: "ResRobot",
    position: "left",
    header: "Departures",
    config: {
        from: "740059685",   // ResRobot Station ID (or a comma-separated string of IDs)
        to: "740072430", // ResRobot Station ID of destination (or a comma-separated string of IDs)
        maximumEntries: 6,  // Number of departures to show on screen
        truncateAfter: 5,   // A value > 0 will truncate direction name at first space after <value> characters. 0 = no truncation
        apiKey: "57434e24-a128-4cdb-bb88-e4b1e857c1aa"  // Your ResRobot apiKey
    }
},

If i remove the code again the mirror loads fine.

Alvinger

The module name is “MMM-ResRobot”, not “ResRobot”. Change that and it will work. Sorry, my bad!

Notumlord

@Alvinger Woops, don’t know how i missed that. It was copied from your README but i can see you’ve fixed it now, i’ll give it another try. :)

Alvinger

@Notumlord, please give it another try. I actually made a last-minute name change but forgot to update the README. :-(

Notumlord

@Alvinger Tried it and now it works, another issue though is that the “To/From” doesnt seem to work properly. If i put station A in “From” and station B in “To” the module also shows “From B to A” so it shows both directions (if that makes sense).

Alvinger

Hi,
Can you post your config?

Notumlord

@Alvinger

{
    module: "MMM-ResRobot",
    position: "left",
    header: "Avgång",
    config: {
        from: "740015597",   // ResRobot Station ID (or a comma-separated string of IDs)
        to: "740000002", // ResRobot Station ID of destination (or a comma-separated string of IDs)
        maximumEntries: 6,  // Number of departures to show on screen
        truncateAfter: 5,   // A value > 0 will truncate direction name at first space after <value> characters. 0 = no truncation
        apiKey: "<key>"  // Your ResRobot apiKey
    }
},

Note from admin: Please use Markdown on code snippets for easier reading!

Alvinger

@Notumlord
When I use your from: and to: I only get departures from Svingeln. I do get a lot of replies but cannot determine if they are all going in the same direction. As far as I can tell they are all departures from Svingeln, not arrivals.

There is a comment in the documentation of the ResRobot API which states that in some situations duplicate data is returned (has to do with real time information). My guess is that it whas just something with the data.

If you want to troubleshoot you can uncomment the print of “body” in node_helper.js, this will print the json-reply from ResRobot.

Notumlord

@Alvinger
My mistake, here is the config:
from: "740059685",
to: "740098001"

Since this is from “Vagnhallen Gårda” to “Centralstaionen” it should only show Bus 60 with the title/destination “Masthugget”.While this does show up it also shows “Redbergsplatsen” which is the opposite direction.
Maybe this is intended?

Note from admin: Please use Markdown on code snippets for easier reading!

Alvinger

It might be. I can’t control what replies ResRobot gives for a specific search. According to its documentation it should only return the result matching the from and to parameters. I’ll do some additionsl checking but you could try the search without a “to” valur to see if there is a difference.

MrH

Hi
Anyone got this working with Skånetrafiken bus traffic? so far I only get “fetching departures…” but someone said that I need to use their own API, not Trafiklabs, is that true?

Alvinger

According to Trafiklab site Skånetrafiken is included in ResRobot so it should work.
Can you post your config?

MrH

did’nt work yesterday at all… now, I get a response but as of right now 16:16 it only shows one departure at 16:30 ?


                {
                        module: "MMM-ResRobot",
                        position: "right",
                        header: "Femman",
                        config: {
                        from: "740015772",   // ResRobot Station ID (or a comma-separated string of IDs)
                        to: "740015577", // ResRobot Station ID of destination (or a comma-separated string of IDs)
                        maximumEntries: 6,  // Number of departures to show on screen
                        truncateAfter: 5,   // A value > 0 will truncate direction name at first space after <value> characters. 0 = no truncation
                        apiKey: "407fe5c8-4621-4a20-a171-xxxxxxxxx"  // Your ResRobot apiKey

                       }
                },

edit:

sometimes only one departure shows up… after a while 5-6 shows… then it’s back to one. Will try different to: ID’s and see if I can get a better response

Alvinger

@MrH, ResRobot (Samtrafiken) had a service window between between 22.00 and 24.00 on October 10th. That was probably why you didn’t get a response then.

I will have a look this evening using your station ids.

Klzow

Hi I’m in the making of building my Magic Mirror and came across this module. I have a problem that after roughly 7 hours it stops to update with the buss departures and freezes. Have anyone else had the same problem and found a solution to it? Works perfectly again after a restart but would like to find a solution to it.

Alvinger

@Klzow, I’ve noticed the same but thought it had to do with the fact that I’m running of a first-generation pi with 256MB. Will look into it to see if I can find out why.

Notumlord

@Klzow same here, sometimes it works for a few days but usually it stops working within 24h

Escenda

I don’t get it to work. Followed the instructions in the readme and registered to get th APIkey. But it still doesn’t start.
What could be wrong? Here is the output:

magicmirror@2.0.0 start /home/pi/MagicMirror
electron js/electron.js

Loading config …
Loading module helpers …
Initializing new module helper …
No helper found for module: faceemployee.
Initializing new module helper …
No helper found for module: compliments.
Initializing new module helper …
All module helpers loaded.
Starting server op port 8080 …
Server started …
Connecting socket for: MMM-Facial-Recognition
Staring module helper: MMM-Facial-Recognition
Connecting socket for: MMM-ResRobot
Starting node_helper for module: MMM-ResRobot
Connecting socket for: newsfeed
Starting module: newsfeed
Sockets connected & modules started …
Launching application.
Create new news fetcher for url: http://nyhetsbrev.viktoria.se/feed/ - Interval: 300000
[MMM-Facial-Recognition] Facerecognition started…
[MMM-Facial-Recognition] Loading training data…
[MMM-Facial-Recognition] ALGORITHM: LBPH
[MMM-Facial-Recognition] Training data loaded!
[MMM-Facial-Recognition] --------------------
[MMM-Facial-Recognition] PiCam connected