MMM-PublicTransportBerlin - Public transport for Berlin and Brandenburg (departures)

Beh

Okay, I think there’s a misunderstanding here.

To make things clear for the future:
The Module from @olexs MMM-PublicTransportDB is not really the same as my MMM-PublicTransportBerlin. Olexs made some changes on the original module to use the data from DB (Deutsche Bahn) while my module is just using the data from VBB (Verkehrsverbund Berlin-Brandenburg).

I think this could be the reason why the stationIds you used did not work @Jay. Since you used a stationId from VBB for DB data. I didn’t test this but maybe @olexs can make a statement to this?

Dicous

This post is deleted!

Dicous

Hallo Gemeinde,

ich probiere es mal in Deutsch.

Wenn ich das Module hinzufüge, sehe ich nur noch ein schwarzen Bildschirm. Kann mir jmd helfen?

Vielen Dank.

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 */

var config = {
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"],

	language: 'de',
	timeFormat: 24,
	units: 'metric',

	modules: [
		{
			module: 'alert',
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: 'clock',
			position: 'top_left'
		},
{
			module: 'calendar',
			header: 'Berlin',
			position: 'top_left',
			config: {
				calendars: [
					{
						symbol: 'calendar-check-o ',
						url: 'https://calendar.google.com/calendar/ical/XXXX.ics'
					},
					{
						symbol: 'calendar-check-o ',
						url: 'https://calendar.google.com/calendar/ical/XXXX.ics'
					}
									]
			}
		},
		{
			module: 'calendar',
			header: 'Basti',
			position: 'top_left',
			config: {
				calendars: [
					{
						symbol: 'calendar-check-o ',
						url: 'https://calendar.google.com/calendar/ical/XXXX.ics'
					}
				]
			}
		},
		{
			module: 'compliments',
			position: 'lower_third'
		},
		{
			module: 'currentweather',
			position: 'top_right',
			config: {
				location: 'Berlin',
				locationID: '6545310',  //ID from http://www.openweathermap.org
				appid: 'xxx'
			}
		},
		{
			module: 'weatherforecast',
			position: 'top_right',
			header: 'Weather Forecast',
			config: {
				location: 'Berlin',
				locationID: '6545310',  //ID from http://www.openweathermap.org
				appid: 'xxx'
			}
		},
		{
			module: 'weatherforecast',
			position: 'top_right',
			header: 'Weather Forecast',
			config: {
				location: 'Dieburg',
				locationID: '2937591',  //ID from http://www.openweathermap.org
				appid: '6f549a70275dff25b166f08f5ea012f7'
			}
		},
		{
			module: 'newsfeed',
			position: 'bottom_bar',
			config: {
				feeds: [
					{
						title: "Spiegel Online",
						url: "http://www.spiegel.de/schlagzeilen/tops/index.rss"
					},
					{
						title: "Kicker",
						url: "http://rss.kicker.de/news/fussball"
					}
				],
				showSourceTitle: true,
				showPublishDate: true
			}
		},
{
    module: 'MMM-PublicTransportBerlin',
    position: 'bottom_right',
    config: {
        name: "Ostkreuz",
        stationId: 900000120003,
        hidden: false,
        ignoredStations: [9100003,2342,1337], 
        excludedTransportationTypes: 'bus,suburban,subway',   
        delay: 10,
        interval: 120000,
        departureMinutes: 10,          
        maxDepartures: 15,
        marqueeLongDirections: true,
        showColoredLineSymbols: true,  
        useColorForRealtimeInfo: true,
        showTableHeadersAsSymbols: true,
        maxUnreachableDepartures: 3,    
        maxReachableDepartures: 7,
        fadeUnreachableDepartures: true,
        fadeReachableDepartures: true,
        fadePointForReachableDepartures: 0.25
    }
},
	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== 'undefined') {module.exports = config;}

yawns

@Dicous
Did you install (git clone) the module into the right folder ~/MagicMirror/modules/ ? Did you also run npm install in the new subfolder ~/MagicMirror/modules/MMM-PublicTransportBerlin ?

Dicous

yes. i did:

pi@raspberrypi:~/MagicMirror/modules/default $ git clone https://github.com/deg0nz/MMM-PublicTransportBerlin.git
Klone nach 'MMM-PublicTransportBerlin'...
remote: Counting objects: 184, done.
remote: Total 184 (delta 0), reused 0 (delta 0), pack-reused 184
Empfange Objekte: 100% (184/184), 109.67 KiB | 0 bytes/s, Fertig.
Löse Unterschiede auf: 100% (110/110), Fertig.
Prüfe Konnektivität... Fertig.
pi@raspberrypi:~/MagicMirror/modules/default $ cd MMM-PublicTransportBerlin
pi@raspberrypi:~/MagicMirror/modules/default/MMM-PublicTransportBerlin $ npm install
MMM-PublicTransportBerlin@0.2.0 /home/pi/MagicMirror/modules/default/MMM-PublicTransportBerlin
└─┬ vbb-client@1.0.0
  ├─┬ isomorphic-fetch@2.2.1
  │ ├─┬ node-fetch@1.6.3
  │ │ ├─┬ encoding@0.1.12
  │ │ │ └── iconv-lite@0.4.15
  │ │ └── is-stream@1.1.0
  │ └── whatwg-fetch@2.0.3
  └─┬ ndjson@1.5.0
    ├── json-stringify-safe@5.0.1
    ├── minimist@1.2.0
    ├── split2@2.1.1
    └─┬ through2@2.0.3
      ├─┬ readable-stream@2.2.6
      │ ├── buffer-shims@1.0.0
      │ ├── core-util-is@1.0.2
      │ ├── inherits@2.0.3
      │ ├── isarray@1.0.0
      │ ├── process-nextick-args@1.0.7
      │ ├── string_decoder@0.10.31
      │ └── util-deprecate@1.0.2
      └── xtend@4.0.1

yawns

No, you did not. You are in ~/MagicMirror/modules/default and not ~/MagicMirror/modules. Modules in default won’t be executed, the default area is “protected”.

Dicous

Thank You.
I am still a Noob
You made my day

olexs

@Beh This is correct. Station IDs are different between DB and BVG networks (and others, such as my local RMV), and I haven’t yet added a proper error message for “wrong” IDs, instead it fails silently. Getting DB IDs is a bit of a pain, too, I’m working on a small public interface for that. I’ll open a separate thread for the fork.

While I’m here: thanks a lot for your work! Without your code, my module would never exist. I’ve put an attribution in the readme, if you want it higher up just say a word :)

Beh

@olexs
You’re very welcome :smile:
I’m happy that someone had use for it, so the code is not useless :) I already noticed the attribution in the readme and appreciated it ;) Thanks a lot

pauabaer

hey guys,
i am still a noob. please be patient with me :)

i dont know how to get the station id. obviously i dont understand the api-documentation. can you please help me with this?

i have already installed the mmm-publictransportberlin module and the vbb-rest from github. but now i dont get on.

greets
pauabaer