MMM-PublicTransportBerlin - Public transport for Berlin and Brandenburg (departures)

[Beh]

Okay, I think there’s a misunderstanding here.

To make things clear for the future:
The Module from @olexs MMM-PublicTransportDB is not really the same as my MMM-PublicTransportBerlin. Olexs made some changes on the original module to use the data from DB (Deutsche Bahn) while my module is just using the data from VBB (Verkehrsverbund Berlin-Brandenburg).

I think this could be the reason why the stationIds you used did not work @Jay. Since you used a stationId from VBB for DB data. I didn’t test this but maybe @olexs can make a statement to this?

[Dicous]

This post is deleted!

[Dicous]

Hallo Gemeinde,

ich probiere es mal in Deutsch.

Wenn ich das Module hinzufüge, sehe ich nur noch ein schwarzen Bildschirm. Kann mir jmd helfen?

Vielen Dank.

/* Magic Mirror Config Sample
 *
 * By Michael Teeuw http://michaelteeuw.nl
 * MIT Licensed.
 */

var config = {
	port: 8080,
	ipWhitelist: ["127.0.0.1", "::ffff:127.0.0.1", "::1"],

	language: 'de',
	timeFormat: 24,
	units: 'metric',

	modules: [
		{
			module: 'alert',
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: 'clock',
			position: 'top_left'
		},
{
			module: 'calendar',
			header: 'Berlin',
			position: 'top_left',
			config: {
				calendars: [
					{
						symbol: 'calendar-check-o ',
						url: 'https://calendar.google.com/calendar/ical/XXXX.ics'
					},
					{
						symbol: 'calendar-check-o ',
						url: 'https://calendar.google.com/calendar/ical/XXXX.ics'
					}
									]
			}
		},
		{
			module: 'calendar',
			header: 'Basti',
			position: 'top_left',
			config: {
				calendars: [
					{
						symbol: 'calendar-check-o ',
						url: 'https://calendar.google.com/calendar/ical/XXXX.ics'
					}
				]
			}
		},
		{
			module: 'compliments',
			position: 'lower_third'
		},
		{
			module: 'currentweather',
			position: 'top_right',
			config: {
				location: 'Berlin',
				locationID: '6545310',  //ID from http://www.openweathermap.org
				appid: 'xxx'
			}
		},
		{
			module: 'weatherforecast',
			position: 'top_right',
			header: 'Weather Forecast',
			config: {
				location: 'Berlin',
				locationID: '6545310',  //ID from http://www.openweathermap.org
				appid: 'xxx'
			}
		},
		{
			module: 'weatherforecast',
			position: 'top_right',
			header: 'Weather Forecast',
			config: {
				location: 'Dieburg',
				locationID: '2937591',  //ID from http://www.openweathermap.org
				appid: '6f549a70275dff25b166f08f5ea012f7'
			}
		},
		{
			module: 'newsfeed',
			position: 'bottom_bar',
			config: {
				feeds: [
					{
						title: "Spiegel Online",
						url: "http://www.spiegel.de/schlagzeilen/tops/index.rss"
					},
					{
						title: "Kicker",
						url: "http://rss.kicker.de/news/fussball"
					}
				],
				showSourceTitle: true,
				showPublishDate: true
			}
		},
{
    module: 'MMM-PublicTransportBerlin',
    position: 'bottom_right',
    config: {
        name: "Ostkreuz",
        stationId: 900000120003,
        hidden: false,
        ignoredStations: [9100003,2342,1337], 
        excludedTransportationTypes: 'bus,suburban,subway',   
        delay: 10,
        interval: 120000,
        departureMinutes: 10,          
        maxDepartures: 15,
        marqueeLongDirections: true,
        showColoredLineSymbols: true,  
        useColorForRealtimeInfo: true,
        showTableHeadersAsSymbols: true,
        maxUnreachableDepartures: 3,    
        maxReachableDepartures: 7,
        fadeUnreachableDepartures: true,
        fadeReachableDepartures: true,
        fadePointForReachableDepartures: 0.25
    }
},
	]

};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (typeof module !== 'undefined') {module.exports = config;}

[yawns]

@Dicous
Did you install (git clone) the module into the right folder ~/MagicMirror/modules/ ? Did you also run npm install in the new subfolder ~/MagicMirror/modules/MMM-PublicTransportBerlin ?

[Dicous]

yes. i did:

pi@raspberrypi:~/MagicMirror/modules/default $ git clone https://github.com/deg0nz/MMM-PublicTransportBerlin.git
Klone nach 'MMM-PublicTransportBerlin'...
remote: Counting objects: 184, done.
remote: Total 184 (delta 0), reused 0 (delta 0), pack-reused 184
Empfange Objekte: 100% (184/184), 109.67 KiB | 0 bytes/s, Fertig.
Löse Unterschiede auf: 100% (110/110), Fertig.
Prüfe Konnektivität... Fertig.
pi@raspberrypi:~/MagicMirror/modules/default $ cd MMM-PublicTransportBerlin
pi@raspberrypi:~/MagicMirror/modules/default/MMM-PublicTransportBerlin $ npm install
MMM-PublicTransportBerlin@0.2.0 /home/pi/MagicMirror/modules/default/MMM-PublicTransportBerlin
└─┬ vbb-client@1.0.0
  ├─┬ isomorphic-fetch@2.2.1
  │ ├─┬ node-fetch@1.6.3
  │ │ ├─┬ encoding@0.1.12
  │ │ │ └── iconv-lite@0.4.15
  │ │ └── is-stream@1.1.0
  │ └── whatwg-fetch@2.0.3
  └─┬ ndjson@1.5.0
    ├── json-stringify-safe@5.0.1
    ├── minimist@1.2.0
    ├── split2@2.1.1
    └─┬ through2@2.0.3
      ├─┬ readable-stream@2.2.6
      │ ├── buffer-shims@1.0.0
      │ ├── core-util-is@1.0.2
      │ ├── inherits@2.0.3
      │ ├── isarray@1.0.0
      │ ├── process-nextick-args@1.0.7
      │ ├── string_decoder@0.10.31
      │ └── util-deprecate@1.0.2
      └── xtend@4.0.1

[yawns]

No, you did not. You are in ~/MagicMirror/modules/default and not ~/MagicMirror/modules. Modules in default won’t be executed, the default area is “protected”.

[Dicous]

Thank You.
I am still a Noob
You made my day

[olexs]

@Beh This is correct. Station IDs are different between DB and BVG networks (and others, such as my local RMV), and I haven’t yet added a proper error message for “wrong” IDs, instead it fails silently. Getting DB IDs is a bit of a pain, too, I’m working on a small public interface for that. I’ll open a separate thread for the fork.

While I’m here: thanks a lot for your work! Without your code, my module would never exist. I’ve put an attribution in the readme, if you want it higher up just say a word :)

[Beh]

@olexs
You’re very welcome :smile:
I’m happy that someone had use for it, so the code is not useless :) I already noticed the attribution in the readme and appreciated it ;) Thanks a lot

[pauabaer]

hey guys,
i am still a noob. please be patient with me :)

i dont know how to get the station id. obviously i dont understand the api-documentation. can you please help me with this?

i have already installed the mmm-publictransportberlin module and the vbb-rest from github. but now i dont get on.

greets
pauabaer