MMM-Ruter (for Oslo and Akershus in Norway)

[open_book]

Hi @Cato all good!

Default config language is “en” (english).

Here is a film demonstrating the refreshing issue:

https://www.dropbox.com/s/5n0lkx9z3lhznkn/2016-11-05 18.52.26.mp4?dl=0

I tried setting the animation speed to 10 to elimate the display flicker. It’s a simple hack, but worked fine. Now it’s barely noticeable.

:)

[open_book]

Hi @Cato ,

I’ve just updated with MM 2.1.0 and checked that I’m running the latest version of MMM-Ruter.

When I tried to run the module with two different stops, it crashed the config file.

´´´´javascript´´´´

{
module: ‘MMM-Ruter’,
header: ‘Ruter’,
position: ‘bottom_right’,
config: {
showPlatform: true,
maxItems: 10,
stops: [
{
stopId: “3010430”,
platforms: [ “1”, “2” ],
timetoThere: 2
}
{
stopId: “3010425”,
platforms: [ “1”, “2” ]
timetoThere: 2
}
]
}
},
´´´´javascript´´´´

It runs fine with 1 stop. But I get a config error message with 2 stops. Even if I just copy the exact same information two times.

Is there an error in the config above? Let me know!

[Cato]

@open_book Seems you are missing a comma between the stops.

[open_book]

@Cato yes. yes I am. Thanks. That’s it!

[LincolnClay]

Hi @Cato. Great work on this very practical module.
I am just getting into raspberry pi (3) and MM, so this is the first module i try to install. Unfortnatly when I run MM it goes black. I guess there is something with how I inserted the module in the config.js file.
This is how I did it.

Also this is what the terminal with the same config.js file.

//pi@raspberrypi:~/MagicMirror $ npm start

> magicmirror@2.1.0 start /home/pi/MagicMirror
> electron js/electron.js

Xlib:  extension "RANDR" missing on display ":1.0".
Starting MagicMirror: v2.1.0
Loading config ...
Loading module helpers ...
No helper found for module: MMM-Ruter.
No helper found for module: alert.
Initializing new module helper ...
No helper found for module: clock.
Initializing new module helper ...
No helper found for module: compliments.
No helper found for module: currentweather.
No helper found for module: weatherforecast.
Initializing new module helper ...
All module helpers loaded.
Starting server op port 8080 ... 
Server started ...
Connecting socket for: updatenotification
Connecting socket for: calendar
Starting node helper for: calendar
Connecting socket for: newsfeed
Starting module: newsfeed
Sockets connected & modules started ...
Whoops! There was an uncaught exception...
{ Error: listen EADDRINUSE :::8080
    at Object.exports._errnoException (util.js:1026:11)
    at exports._exceptionWithHostPort (util.js:1049:20)
    at Server._listen2 (net.js:1253:14)
    at listen (net.js:1289:10)
    at net.js:1399:9
    at _combinedTickCallback (internal/process/next_tick.js:77:11)
    at process._tickCallback (internal/process/next_tick.js:98:9)
    at Module.runMain (module.js:592:11)
    at run (bootstrap_node.js:402:7)
    at startup (bootstrap_node.js:157:9)
  code: 'EADDRINUSE',
  errno: 'EADDRINUSE',
  syscall: 'listen',
  address: '::',
  port: 8080 }
MagicMirror will not quit, but it might be a good idea to check why this happened. Maybe no internet connection?
If you think this really is an issue, please open an issue on GitHub: https://github.com/MichMich/MagicMirror/issues
Xlib:  extension "XInputExtension" missing on display ":1.0".
Xlib:  extension "RANDR" missing on display ":1.0".
Launching application.
Xlib:  extension "XInputExtension" missing on display ":1.0".
Xlib:  extension "XInputExtension" missing on display ":1.0".

[Cato]

@LincolnClay The error indicates the port 8080 is in use. Did you install pm2? If so then Magic Mirror is already started when you run npm start. Just restart it with pm2 restart mm

[LincolnClay]

@Cato Thanks for the prompt response. Yes I installed pm2, but when run pm2 restart mm MM doesn’t open. I only get successful starts with npm start.

If I delete the insertion in config.js file from your module, mm starts normally without being all black. Do you spot any other errors?

[Cato]

@LincolnClay Well, I still don’t think it’s the module’s fault. I tried to replicate your exact configuration and it works.

What output do you get from npm start?

[LincolnClay]

@Cato I’m sorry for the late reply, I had to figure out if there was any issues with my initial MM install. You where absolutely right, the issue had nothing to do with the module. I did a re-install and now the module works perfectly. Thanks for your help and your work on this module :)

[laumb]

How do I get rid of this?

[strawberry 3.141]

@laumb cd ~/MagicMirror/modules/MMM-Ruter then git pull

[Cato]

@laumb you have to run git pull in the modules directory.

This is described in the Readme on GitHub.

[Kimzer]

Any chance you could possibly do this to support Skyss in bergen aswell? Would be really great!

[Cato]

@Kimzer I’m sorry, but I only make modules I need myself. If I move to Bergen, I let you know… ;-)

I did though do a quick search and it doesn’t seem that Skyss has any public API. Found a couple of unofficial/depricated onces, but that is not something I would support anyway…

[amomat]

Hi @Cato. Did something regarding the time change in the last update? Upgraded today and time format is set to 12 instead of 24 as it was before.

This is what is in my config file (have not changed that recently)

language: 'en',
timeFormat: 24,
units: 'metric',

[Cato]

@amomat I have done nothing, and I can’t remember noticing that since I only use public transport in the morning. I will take a look tonight to make sure.

[DeeWoo]

Hi @Cato. I’ve just installed your MMM-Ruter module, and I’m having issues with the time, it’s 12-hour…My Pi is 24 hour, my config is 24 hour…but the MMM-Ruter is 12 hour.

language: "nb",
timeFormat: 24,
units: "metric",

pi@MagicMirror_1:~/MagicMirror/config $ date
Sun 13 Aug 15:26:42 CEST 2017

Any idea how to fix this? :)

[Cato]

Think I found the “bug” (oversight from my end). New version is now available.

[DeeWoo]

@Cato said in MMM-Ruter (for Oslo and Akershus in Norway):

Think I found the “bug” (oversight from my end). New version is now available.

Just wanted to thank you for the lightning fast response!
Now it shows 24h time. Cheers :)

[kj3rra]

Hei Cato!

Great work with the this module. I have two problems:

1. I cant get several stops on Frognerseterbanen (linje 1) to work (Vinderen (3012315), Gaustad (3012320) etc). It stops at ‘Loading’. Im trying in particular to get Vinderen T-bane. I have no other problems getting times from other stops, such as buses etc. Please see picture.
   

2. How do I change the dimmed light on the time-text to be bright. Ive been through alle the files, but I cant find where you can change this. Im really quite new to this, but Ive managed to change text size and ‘dimmness’ on all other modules.

Would be glad if you could help with these two! Thanks!