MMM-PC-Stats

[Mykle1]

Now leave me alone. I’m going to bed. :-)

[justjim1220]

@mykle1 ok

[justjim1220]

@mykle1 YES SIR!!!

[justjim1220]

@mykle1

This is what I ended up with:

for (var i = 0, len = Stats.cpu.threads.length; i < len; i++) {

		var Element = document.createElement("div");
		Element.classList.add("large", "bright", "usage");
		Element.innerHTML = Stats.cpu.threads[i].name + " &nbsp  @  &nbsp " + Number(Math.round(Stats.cpu.threads[i].usage+"e2")+"e-2") + "%";
		wrapper.appendChild(Element);



		// ["acpitz-virtual-0"]["Virtual device"].temp1.value

		// Check if core0 has temp sensor
		var core0TempCheck = Sensors["acpitz-virtual-0"]["Virtual device"];
			if (typeof core0TempCheck !== 'undefined'){
			// core0Temp
			var core0Temp = document.createElement("div");
			core0Temp.classList.add("large", "bright", "core0Temp");
			core0Temp.innerHTML = Stats.cpu.threads[i].name + " &nbsp  @  &nbsp " + Sensors["acpitz-virtual-0"]["Virtual device"].temp1.value + "°C";
			wrapper.appendChild(core0Temp);
		}
	}

this is the output:

[justjim1220]

@mykle1

So, when I use the code you sent last night, It gives error regarding .temp2.value

being that the ‘Virtual device’ only has 1 output value.

My changes will always show the ‘temp value’ as the same for all CPU’s

When I run ‘sensors’ in MM, it showed a ‘Core0 Temp’ and a ‘Core1 Temp’, It actually showed 2 temps for each one.

jim@jim-Aspire-4520:~/MagicMirror$ sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp:   +69.0°C  
Core0 Temp:   +67.0°C  
Core1 Temp:   +69.0°C  
Core1 Temp:   +68.0°C  

acpitz-virtual-0
Adapter: Virtual device
temp1:        +71.0°C  (crit = +100.0°C)

nouveau-pci-0090
Adapter: PCI adapter
GPU core:     +1.20 V  (min =  +1.00 V, max =  +1.20 V)
temp1:        +64.0°C  (high = +95.0°C, hyst =  +3.0°C)
                       (crit = +105.0°C, hyst =  +2.0°C)
                       (emerg = +135.0°C, hyst =  +5.0°C)

With this being a Dual Core CPU, why can’t I get it to use the ‘PCI adapter’ to give the output?

[justjim1220]

@mykle1

Another question…

How can be changed to show F°?

Not really a big deal, mostly just curious… :upside-down_face:

[yawns]

@justjim1220 said in MMM-PC-Stats:

@mykle1

Another question…

How can be changed to show F°?

Not really a big deal, mostly just curious… :upside-down_face:

Just run sensors -f, at least this is working in debian, so I guess it should work in raspbian too

Or, if you just want to convert Celcius to Fahrenheit, add some code to Mykles module like this temp = ((temp/5)*9)+32 ;)
But then again, you could add a config option to toggle between Fahrenheit and Celsius and submit a pull request