[MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer

AxLed

@evroom
I think we are getting closer to a working module.
The 5 requests are successful, so config should be ok.

Can you please answer following questions:

do you have timers in your receiver (can be checked by http://IPofyourReceiver/web/timerlist)?
what if you open MM in a browser in the same network and use F12. Are there any errors?
Can you send me following 5 xml files: …/web/about, …/web/getallservices, …/web/timerlist, …/web/servicelistplayable, … /web/epgnow

After this i can modifiy the node_helper.js of development branch for further debugging.

AxLED

evroom

@axled

Yes
Perhaps stupid, but do not how to do that. Cannot open MM using the MM IP.
Yes. Probably by pm.

evroom

Can only upload pictures.
Do not see a pm option.
Hate it when you need to solve problems before you can solve problems.

AxLed

@evroom said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:

Perhaps stupid, but do not how to do that. Cannot open MM using the MM IP.

My MM config.js for IP looks like

config = {
	address: "192.168.56.101", 
	port: 8080,
	ipWhitelist: [], // Set [] to allow all IP addresses

So can can open a browser in the same network and enter http://192.168.56.101:8080 to open MM in my browser. F12 shows a console where you can filter for errors.

Just send me the files by email ak10zeichen-xy@yahoo.de

AxLED

Cr4z33

@AxLed

No timers are set right now.
Here is what it came out on the console running MM into Dev mode:

MMM-Dreambox.js:228 Uncaught TypeError: Cannot read property '0' of undefined
    at Class.socketNotificationReceived (MMM-Dreambox.js:228)
    at module.js:246
    at r.<anonymous> (socketclient.js:25)
    at r.emit (index.js:133)
    at r.onevent (socket.js:270)
    at r.MMSocket.self.socket.onevent (socketclient.js:19)
    at r.onpacket (socket.js:228)
    at r.<anonymous> (index.js:21)
    at r.emit (index.js:133)
    at r.ondecoded (manager.js:345)
socketNotificationReceived @ MMM-Dreambox.js:228
(anonymous) @ module.js:246
(anonymous) @ socketclient.js:25
r.emit @ index.js:133
r.onevent @ socket.js:270
MMSocket.self.socket.onevent @ socketclient.js:19
r.onpacket @ socket.js:228
(anonymous) @ index.js:21
r.emit @ index.js:133
r.ondecoded @ manager.js:345
(anonymous) @ index.js:21
r.emit @ index.js:133
s.add @ index.js:241
r.ondata @ manager.js:335
(anonymous) @ index.js:21
r.emit @ index.js:133
r.onPacket @ socket.js:456
(anonymous) @ socket.js:273
r.emit @ index.js:133
r.onPacket @ transport.js:145
r.onData @ transport.js:137
ws.onmessage @ websocket.js:147

Cr4z33

@evroom said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:

Perhaps stupid, but do not how to do that. Cannot open MM using the MM IP.

Just run MM into DEV mode and in the right panel switch to the tab ‘Console’

cd ~/MagicMirror/
npm start dev

AxLed

Can you send me following 5 xml files: …/web/about, …/web/getallservices, …/web/timerlist, …/web/servicelistplayable, … /web/epgnow by email ak10zeichen-xy@yahoo.de

AxLED

evroom

@axled

Forgot the port.
I see this error:

TypeError: undefined is not an object (evaluating 'json.e2servicelistrecursive.e2bouquet.e2servicelist.e2service')

In line 229 of MMM-Dreambox.js:

this.sender = json.e2servicelistrecursive.e2bouquet.e2servicelist.e2service;

Mailed you the files.

Cr4z33

@axled said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:

Can you send me following 5 xml files: …/web/about, …/web/getallservices, …/web/timerlist, …/web/servicelistplayable, … /web/epgnow by email ak10zeichen-xy@yahoo.de

AxLED

Me?

AxLed

@Cr4z33
Yes.

Cr4z33

@axled OK gimme a minute and I send them. :winking_face:

evroom

“You talking to me ?” (Robert de Niro - Taxi Driver).
I sent the files, just in case.

AxLed

@evroom said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:

I sent the files

@evroom
Thanks for the files, i checked them and found an Error in MMM-Dreambox.js

My “getallservices” xml only has one “bouquet”, so i checked only for one.
As your “getallservices” xml has three “bouquets” i changed the code.

If you do a git pull (master repository) it should work.

So far i decided only to show the services/stations/channels of the first bouquet only, (userbouquet.favourites.tv) in your case.

AxLED

AxLed

@cr4z33 said in [MMM-Dreambox] to connect a Dreambox or a Enigma2 Receiver (like VU or VU+) to MagicMirror and stream stations via omxplayer:

@axled OK gimme a minute and I send them.

@Cr4z33
Thanks for your files, one a fast view you also have more than one bouquet in “getallservices”, so my last fix should work for you also.

Try agit pull (master repository).

AxLED

evroom

@AxLed
The services list now is present.
Next step is to stream one.

Cr4z33

@axled the situation now is like in the below screenshot and I still don’t know how I am supposed to stream a channel (if I don’t have to specify its url). :smiling_face_with_open_mouth_cold_sweat:

evroom

All actions:

http://192.168.178.30:8080/remote?action=NOTIFICATION&notification=DB-SERVICE-NEXT

http://192.168.178.30:8080/remote?action=NOTIFICATION&notification=DB-SERVICE-PREV

http://192.168.178.30:8080/remote?action=NOTIFICATION&notification=DB-PLAY

http://192.168.178.30:8080/remote?action=NOTIFICATION&notification=DB-STOP

Result in:

Cannot GET /remote

AxLed

@evroom
How do you plan to interact with your MM?
I have a rotary encoder. Buttons or touch is also fine.
For the beginning you can use MMM-Remote-Control to send notifications.
I have to complete my Readme, that the sample links only work with MMM-Remote-Control

So install MMM-Remote-Control, open an browser, modify the links matching to your environment and you should be able to select channels and stream them.

Important: Try with SD Channels first, as for HD channels the mpg2 codec is needed.

AxLED

evroom

@axled
I was about to ask about this.
Suppose it works, how will I use it in practise?

I have a Pi with a monitor connected hanging in the kitchen.
No fancy mirror like many, with speech and buttons and PIRs.

So, basically no interaction.

I plan on getting speech running, but I have other projects running at this moment (for instance Homematic IP and ioBroker).

I will try to install MMM-Remote-Control and see if that will work.

AxLed

@Cr4z33
I dont know if it makes sense, to use a favorite list of services/stations/channels that wont fit on the screen of MM, as the list is to long.

Start streaming can be done by selecting one service/station/channel (by using yourmmip:8080/remote?action=NOTIFICATION&notification=DB-SERVICE-NEXT for example) and than start streaming by (yourmmip:8080/remote?action=NOTIFICATION&notification=DB-PLAY).

Do you have MMM-Remote-Control installed?
Se my previous answer to evroom.

AxLED