MMM-Assistantmk2 and MMM-Hotword not picking up

jmartin1009

@sdetweil yeah it’s the PS3 eye camera microphone, it has a 4 microphone array that alsamixer hates lol

costascontis

I use the ps3 eye cam mic and its working fine with hotword…

ejay-ibm

install audacity and give a quick test to your mic.
you will know if you mic is dead

sudo apt-get install audacity

sdetweil

@costascontis said in MMM-Assistantmk2 and MMM-Hotword not picking up:

I use the ps3 eye cam mic and its working fine with hotword…

yes, but there are lots of reports of individual mics not working… replace and all is ok…

bachoo786

Hi @ejay-ibm

I managed to get assistantmk2 and hotword working and everything is fine. However I will be grateful if you could please help me with the following queries:

1). When i say jarvis or smart mirror, the assistantmk2 module takes 1 to 2 seconds to respond i.e. the ding bell I mean after which I can ask any question. How can I remove this lag and make it instant? I have seen other people dont have this issue.

2). How do I get the assistantmk2 to play youtube videos on my mirror by asking it to play something from youtube?

3). Finally can I change the hotword from “jarvis” to say “ok google”?

Thanks.

This is my config:

{
    module: "MMM-AssistantMk2",
    position: "top_right",
    config: {
      deviceLocation: {
                        coordinates: { // set the latitude and longitude of the device to get localized information like weather or time. (ref. mygeoposition.com)
                        latitude: 51.597442, // -90.0 - +90.0
                        longitude: -0.338839, // -180.0 - +180.0
          }
        },
      record: {
        recordProgram : "arecord",
        device        : "default",
      },
      play: { // Full values are in `FOR EXPERTS` section.
              playProgram: "mpg321", // recommended.
      },
      notifications: {
        ASSISTANT_ACTIVATED: "HOTWORD_PAUSE",
        ASSISTANT_DEACTIVATED: "HOTWORD_RESUME",
      },
    }
  },
  {
    module: "MMM-Hotword",
    config: {
      record: {
        recordProgram : "arecord",
        device        : "default",
      },
      autostart:true,
      onDetected: {
        notification: function (payload) {
          return "ASSISTANT_ACTIVATE"
        },
        payload: function (payload){
          return {
            profile: payload.hotword
          }
        }
      },
    },
  },

Also you have notifications in your config, what is it for? can you please explain? thanks.

ejay-ibm

Hi,

1- I would say first to check you CPU charge first , the delay might be due to the load.
2- just say " Jarvis" … " Micheal jackson smooth criminal" it will play the youtube video clip
3- if you want to say " ok google" you have to add your own umdl or umdp file.

Info and new umd* file can be found and created here :
https://snowboy.kitt.ai/

hope this help .

Ejay

bachoo786

@ejay-ibm thanks for the quick reply.

you have notifications in your config, what is it for? can you please explain? thanks.

ejay-ibm

@bachoo786
The notification allows to the hotword module to receive instruction from the assistant module by notification to pause or resume itself in the right time.
When assistant 'talk it pause the hotword detection
ASSISTANT_ACTIVATED: “HOTWORD_PAUSE”,
When the assistant is done it restart the hotword detection .
ASSISTANT_DEACTIVATED: “HOTWORD_RESUME”,

Ejay

AdnanAhmed97

The hotword module should be called outside the assistant module
Add the brackets correctly and change and change device to plughw : 1;

bachoo786

@AdnanAhmed97 what do you mean?