Hello Everyone

My Mirror Project is already finished since a couple months, but i had no “time” :-) to post it here.

First, thank you very much @MichMich and @j.e.f.f for this amazing Idea and the modules i can use for this.
It’s a pleasure to stand up in the morning, looking on the screen to see the traffic, calender and weather information in this esthetic manner :hugging_face:

The screen is always off until the radard sensor detects motion in front of the display.
I used Douglas wood because its cheap and has intresting visual structure ^^

---

Parts

product	cost
Mirror Glass ~149x36cm (Glas Trösch, Switzerland)	66€
Douglas wood for the frame (OBI)	25€
27" Philips monitor	spare - 0€
Raspberry Pi 3 incl. powersupply	~ 57€
Radar sensor (RCWL0516)	8€
DHT22 Temp & Hum Sensor (Seeed 101020019)	15€
Screws and little stuff	~ 10€
Total	~ 181€

---

Modules

• MMM-MyCalendar
• MMM-MyCommute
• MMM-MyWeather
• MMM-MyWastePickup
• MMM-PIR-Sensor replaced with MM-Display-Controller
  thats an os-deamon based solutions, because PIR sensor doesn’t work anymore since MM 2.4 and OpenGL…
• MMM-DHT22
• newsfeed
• clock

---

Pictures

Regards and thanks for feedback

Sehr geil, dass du das auf Deutsch machst :D

Maybe i need this too if you’r done ^^

@mkastern Maybe you are still interested.
I tested alot for an idea i had and now i just modified the weatherforecast.css to get this result (top left):

Made this changes:

td { 
  display: block;
  padding-right: 25px
}
tr { display: inline-block;}

.weatherforecast .day {
  padding-left: 5px;
}

.weatherforecast .weather-icon {
  padding-left: 5px;
}

.weatherforecast .max-temp {
  
}

.weatherforecast .min-temp {
 
}

But keep in mind, after an update of MM, your changes get overwritten because it’s an integrated module!

09:40 would be correct:
Es isch zwanzg vor zäni

12:40 the same:
Es isch zwanzg vor eis

The rest looks fine :-)

By the way (you dont have to change it) but usualy we say “zwänzg” not “zwanzg” ;-)

@cubesmi yes they sent me a book with 3 samples of A5 size. I sent it back but they did not request to do :)

Cowboysdude is right, you have to use, for example a RCWL0516 (radar sensor) instead.

@max86 Hi Max, sure :-)
Outline is 153cm x 40.3cm for the frame
and visable mirror is 34.3cm

So the overflow in my case should be about ~1.5 to 1.7cm

@jersam Aaaah, now i get your point :D

I started with 2

Douglas Wood 4,5 cm x 200 cm x 7 cm
https://www.obi.ch/terrassendielen/unterkonstruktion-douglasie-4-5-cm-x-200-cm-x-7-cm/p/3434313

Cut in the half and to my needed length.
Get rid of the wood i dont need with a wood milling, like this:

…with two different positions to get a “stairway” :-)

@teegray1124 Yes but i think you mean the “rainfall” amount, when you ask like this ^^
I noticed that it states “nullmm” instead of a number, since a couple weeks.

@onkelbobby Hi, thank you :-)

I just mounted the sensor on a piece of wood behind the glass (to reduce the range a little bit without a tresistor) instead of directly behind the glass.

If you need i can make a picture but i think the illustration should do the job ;-)

@jersam said in 27" Mirror with selfmade frame:

which router bits did you use on the 2x4s?

Sorry i dont get your point ^^
Do you mean this, maybe?

yes you have to.
On my thread i saw a post they only deliver to business customers but they give you a contact for private orders.

Ah sorry i did not get any notifications about new posts :-)
I will answer all the questions this week

@mat74 https://www.glastroesch.ch/fr/home.html I have my mirror from Glas Trösch, no cheaper way for you :-)