Topics created by acdacd2

@acdacd2 if you would share your config with us then there was a little higher chance to guess your problem.

Shares bought and now ok with MM.
Thanks for your help,

Hello,

The chat bot doesn’t appear in the mm. Is there a way to validate the device as we do for a desktop via the qr code ?
Thanks for your answer,

acd,

@MMRIZE hello, I already restarted the MM and same message in the bot channel.
and other problem : no display of the chat in the mirror

{
module: ‘MMM-TelegramBot’,
position: ‘bottom_center’,
config: {
telegramAPIKey : ‘zrzerzera’,
allowedUser : [‘azerazera’], // This is NOT the username of bot.
adminChatId : zaer66,

}
},

Thanks,

@fozi
your welcome

hello,

my iframe reload module doesn’t show the web site configured.
My config

{
module: ‘iFrameReload’,
position: ‘middle_center’, // This can be any of the regions.
config: {
// See ‘Configuration options’ for more information.
url: “https://video.nest.com/embedded/live/wSbs3mRsOF?autoplay=1”,
width: “100%”, // Optional. Default: 400px
height: “300px”, // Optional. Default: 800px
refreshInterval: 20 //Optional. Default: 3600 = 1 hour
}
},

Please advice me.

Thanks,

@acdacd2 do you use table or chart mode?

The reason why I ask is that the api which is used to generate the table, only provides data for run, ride and swim activity types.

Support for additional activity types in chart mode is in the works. Watch out of updates. ;)

Here https://magicmirror.builders
If using a pi2 or pi3 use

bash -c "$(curl -sL https://raw.githubusercontent.com/MichMich/MagicMirror/master/installers/raspberry.sh)"

I found this type of mirror : MIRASTAR

Do you have expérience and advice ?

Thankx,

SGG MIRASTAR
Product information
Technical information
PROCESSING CAPABILITIES
In principle, the coating of SGG MIRASTAR can be thermally toughened*, even on the pulley roll side. Chromium mirror glass can therefore be converted to toughened glass, giving it a huge advantage over conventional silvered mirrors!
Wet treatment and surface processing (grinding, drilling, engraving or screen printing) are possible as well as its fabrication to laminated safety glass.
The coatings are applied using a magnetron process. Their scratch resistance and hardness are however equivalent to pyrolytic hard coatings.
The glass has passed the following tests:
Taber test
Erichsen test
Condensation resistance
Acid water resistance
Resistance to neutral salt spray
Reflectance: coating side: ≥ 58 %**
Transmission: 3 %**

Radiation and convection heaters are suitable for these applications. Please contact the manufacturers of SGG MIRASTAR.
** +/- 1 %
Please ensure that SGG MIRASTAR is only used for its intended purpose. In case of doubt please contact the manufacturer directly.

Hi @MichMich Thank you very much for this project. i am following this for many years and finally got some time to get my hands on this.
for a start i would like to start with smaller mirror but i am having difficulties getting it here in Netherlands (near Leiden). All the shops online are quite expensive. can you please tell me from where you got your mirror ?

Could someone please post a sample xml file that works?
I dont know how to generate my xml file correctly.

@acdacd2 good job!

@gauka12345 use the scripts on my repo
https://github.com/sdetweil/MagicMirror_scripts

read the readme for the commands to enter