I would add a USB Microphone
https://www.amazon.com/Kinobo-Microphone-Desktop-Recognition-Software/dp/B00IR8R7WQ/

And a PIR Sensor
https://www.amazon.com/PIR-motion-sensor-HC-SR501-Arduino/dp/B00L9GKN3I/

If I was to do it again, I would call your local glass shops first. I got the same acrylic mirror from Amazon and no matter how careful I was with the frame, it flexes and create a funhouse mirror effect. I called around and the first glass shop I contacted had glass two-way mirror for roughly the same price.

What are you planning to do with the acrylic cement?

I use Volumio to play Spotify on a RPi and the MMM-Volumio plugin to display Now Playing info from Volumio.

https://volumio.org
https://forum.magicmirror.builders/topic/2515/mmm-volumio

I would add a USB Microphone
https://www.amazon.com/Kinobo-Microphone-Desktop-Recognition-Software/dp/B00IR8R7WQ/

And a PIR Sensor
https://www.amazon.com/PIR-motion-sensor-HC-SR501-Arduino/dp/B00L9GKN3I/

If I was to do it again, I would call your local glass shops first. I got the same acrylic mirror from Amazon and no matter how careful I was with the frame, it flexes and create a funhouse mirror effect. I called around and the first glass shop I contacted had glass two-way mirror for roughly the same price.

What are you planning to do with the acrylic cement?

Does the PIR sensor work well without the dome? I wish I knew you could do that before I drilled a big ugly hole in my frame.

Beautiful mirror!

Do those two entries have due dates associated? Mine did some weird things until I assigned due dates to each entry… and subsequently added tkotz8105’s fetcher fix.

They are working on MMM-MyCommute + Calendar integration.
https://github.com/jclarke0000/MMM-MyCommute/pull/1

@brandongomez I think in my case, it was a bad IP Camera stream rather than a bad module.

Comment out all the third party modules in the config.js then add them back one by one testing each. For me it was the iFrame module displaying an IP camera stream that locked up my pi.

Hows the long term stability of displaying the DLink video stream? I have a Foscam displaying in iFrame and it crashes MM ramdomly every 24 hours or so.

I use Volumio to play Spotify on a RPi and the MMM-Volumio plugin to display Now Playing info from Volumio.

https://volumio.org
https://forum.magicmirror.builders/topic/2515/mmm-volumio

Thanks bhpler!

This didn’t work for me. Running Raspbian Jessie lite. There is no file /home/pi/.config/autostart
There is one in /home/pi/.config/lxsession/LDXE/autostart but that did not work either. Various googling says the proper way of autostarting scripts in Jessie is systemd but it is overly complicated and I haven’t been able to figure it out.