Topics created by drfukc

Hi,
I am aware that there are multiple threads on troubleshooting the Google Assistant, but I did not find one on systematical troubleshooting. How do I test what is not working? Below please find my attempts, which may be a first start, but did not identify the root cause.
Now I am stuck with my MMM-AssistantMk2 and MMM-Hotword installation and configuration and look for step-by-step troubleshooting. When I started the Google Assistant installation, all installed MM modules are working fine, so I imaged the SD-card for an easy fallback.

My steps have been:

Installing MMM-AssistantMk2 + MMM-Hotword Now I get a flashing bubble on the mirror and whenever I say the magic word: “smart-mirror” the string [“smart-mirror”] shows up next to the bubble on my Magic Mirror, but nothing seems to happen after (similar to the image on this page, just my hotword is not “Computer” but “smart mirror”: https://github.com/eouia/MMM-Hotword)

Maybe most of the things are successfully implemented but how do I get it to work?
I have no clue why or where it hangs, what are steps to identify where it stucks?

So far I have checked the following:

Version checks::
pi@raspberrypi:~/MagicMirror $ uname -a
Linux raspberrypi 4.19.34-v7+ #1211 SMP Mon Apr 8 22:56:37 BST 2019 armv7l GNU/L

pi@raspberrypi:~/MagicMirror $ vcgencmd version
Mar 27 2019 15:45:53
Copyright © 2012 Broadcom
version 2e98b31d18547962e564bdf88e57b3df7085c29b (clean) (release) (start)

pi@raspberrypi:~/MagicMirror $ node -v && npm -v
v10.15.3
6.9.0

These commands resulted in long outputs, but did not point me to anything useful:
pi@raspberrypi:~/MagicMirror/config $ npm start dev
pi@raspberrypi:~ $ dmesg -x -d -T

Audio checks:

Speaker check:
pi@raspberrypi:~ $ aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: ALSA [bcm2835 ALSA], Gerät 0: bcm2835 ALSA [bcm2835 ALSA]
Sub-Geräte: 7/7
Sub-Gerät #0: subdevice #0
Sub-Gerät #1: subdevice #1
Sub-Gerät #2: subdevice #2
Sub-Gerät #3: subdevice #3
Sub-Gerät #4: subdevice #4
Sub-Gerät #5: subdevice #5
Sub-Gerät #6: subdevice #6
Karte 0: ALSA [bcm2835 ALSA], Gerät 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
Sub-Geräte: 1/1
Sub-Gerät #0: subdevice #0

Microphone check:
pi@raspberrypi:~ $ arecord -l
**** Liste der Hardware-Geräte (CAPTURE) ****
Karte 1: AK5371 [AK5371], Gerät 0: USB Audio [USB Audio]
Sub-Geräte: 0/1
Sub-Gerät #0: subdevice #0

Audio Check:
arecord -D plughw:1,0 -d 3 test.wav && aplay test.wav
I hear myself speaking when the pm2 is stopped

Google Credentials and Setup check:
pi@raspberrypi:~/MagicMirror/modules/MMM-AssistantMk2 $ node auth_and_test.js
Type your request:
googlesamples-assistant-pushtotalk --project-id magicmirror-12345 --device-model-id magicmirror-12345-magicmirror-123456
Assistant Response:
Conversation Complete

This section highlights some findings:

pi@raspberrypi:~/MagicMirror $ npm run config:check

magicmirror@2.10.1 config:check /home/pi/MagicMirror
node tests/configs/check_config.js

Checking file… /home/pi/MagicMirror/config/config.js
Line 56 col 56 ‘arrow function syntax (=>)’ is only available in ES6 (use ‘esversion: 6’).
Line 57 col 55 Missing semicolon.

Note: fixing the [“Line 57 col 55 Missing semicolon.“]-issue does not make a difference, I copied-and-pasted this part from here: https://github.com/makepluscode/rpi-tutorial-advanced/tree/master/008-raspbian-magicmirror-google-assistant-latest
The audio/mic-settings in this sample seem to match my setup?

Does anybody have any idea what the next appropriate steps are to find where it hangs?
Any help is very much appreciated.

Cheers
Bob

Hi all,
I feel quite happy with my Google Maps Traffic module but would like to increase the level of map details.
Some streets do not show, they are not displayed due to the zoom level.

Question:
Is there any (hidden?) trigger I can use to modify the level of details without changing the map-size or zoom-level?

@drfukc said in MMM-ImageFileWatcher: Installation error - fsevents (unsupported platform?):

npm WARN optional SKIPPING OPTIONAL DEPENDENCY: fsevents@1.2.9

does it matter?? says OPTIONAL

interesting as I have a 300 dollar credit not 200 and it looks like its for the entire year!

Check out this thread: https://forum.magicmirror.builders/topic/10212/update-help
@thedoorsfanatic helped me fix this problem on mine.

@sdetweil
if you are the author of the RMV module its perfect, if you are not the author of this module it is perfect as well.
However, please accept that in my case the “MMM-RMV.js” requires auditing, otherwise it will not work.
I would be more than pleased if all editing can be done in the “config.js”, at least in my case it does not work.
The default values do not seem to be overriden.
Any idea why?