Super, thank you, I had not seen these modules.
Difficult to understand everything with the translator,
In all that, thanks again for your work and explanation, all this really helps me a lot.

halluin, france

Hello everyone. I want to thank all the community for the info, and the help you brought me on this forum.
Here are some pictures of my mirror almost finished, some finishing, and it will be perfect.

Thank you, the hole at the bottom of the mirror, and use a PIR detector, it only detects when you find it in front of the mirror.
For the photos, I work with the module MMM instagram, because I unfortunately did not succeed in making the other work.
I still have some configuration problem, I would like to succeed in increasing the size of the photos, and also increase the font of writing …
I can not do it.
I have to start a new mirror for my mother, here it is:

@yawns

Works perfectly, thanks for the info.
I also just want to enlarge the image, what and the code for that.

Beautiful works.
Question: on the picture, we would say that it is not a 16/9 screen ??

@Mephiston2K
The advantage of this module is that I created an instagram count, and give all the info to my sisters. Which will allow my mother to have the pictures of the whole family regularly.
On the other hand, the picture does not unfortunately just a day. The way i found it for that, and to have the magic mirror restart automatically at night, to allow the photos to bring it up to date.

@yawns

Works perfectly, thanks for the info.
I also just want to enlarge the image, what and the code for that.

@cpramhofer

Hi, have you test the PIR sensor before.
You can try here: https://diyhacking.com/raspberry-pi-gpio-control/

Yes of course. And thank you in advance for sharing.

halluin, france

Beautiful works.
Question: on the picture, we would say that it is not a 16/9 screen ??

@Jeff
Yes, I just do it at the moment, always the same image size.

@Jeff
I tried the method, it does not always work. He must have a simpler method to enlarge these photos on the mirror.

@Jeff
I did exactly the same thing as you,
And it works perfectly well.
J adds, or removes pictures as I wish.
I would like to succeed to change the size of the photos on the mirror, what you do ???

Thank you, the hole at the bottom of the mirror, and use a PIR detector, it only detects when you find it in front of the mirror.
For the photos, I work with the module MMM instagram, because I unfortunately did not succeed in making the other work.
I still have some configuration problem, I would like to succeed in increasing the size of the photos, and also increase the font of writing …
I can not do it.
I have to start a new mirror for my mother, here it is: