@sdetweil

32bit, as i always did …

i tryed to install on rpi4, i changed to rpi3 and now it works. Does MM not support rpi4 anymore?

@sdetweil said in install upgrade scripts changed for version 2.25 and node 20:

@Jonae are you running the OS in commandline mode?

boot to prompt… not desktop

do , and show results
lsb_release -a
uname -a

or email me the ~/install.log
same userid at gmail

i think i have a problem with the imager software … checking right now

@sdetweil

this run this script:

bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/testit/raspberry.sh)”

get this error:
system running in command line mode, configured for graphical desktop, please reboot

after reboot, same error

@sdetweil

Yes it is fresh, i just did sudo apt update and sudo apt upgrade

I am trying to install Magic Mirror but i get the Unable to install dependencies! error. I tried everything i know bit i cant get past this error. Attached full install log. Help much appreciated. Thanks.

pi@magicmirror:~ $
bash -c “$(curl -sL https://raw.githubusercontent.com/sdetweil/MagicMirror_scripts/master/raspberry.sh)”

install log being saved to /home/pi/install.log
Reading package lists… Done
Building dependency tree… Done
Reading state information… Done
Package ‘nodejs’ is not installed, so not removed
The following package was automatically installed and is no longer required:
libfuse2
Use ‘sudo apt autoremove’ to remove it.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
rm: cannot remove ‘/etc/apt/sources.list.d/nodesource.list’: No such file or directory
Installing helper tools …
Updating packages …
[ <=> ]
Hit:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease
Reading package lists… Done
Reading package lists… Done
Building dependency tree… Done
Reading state information… Done
ca-certificates is already the newest version (20210119).
curl is already the newest version (7.74.0-1.3+deb11u7).
gnupg is already the newest version (2.2.27-2+deb11u2).
The following package was automatically installed and is no longer required:
libfuse2
Use ‘sudo apt autoremove’ to remove it.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
deb [arch=arm64 signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_20.x nodistro main
Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Get:3 https://deb.nodesource.com/node_20.x nodistro InRelease [12.1 kB]
Get:4 https://deb.nodesource.com/node_20.x nodistro/main arm64 Packages [3,264 B]
Fetched 15.4 kB in 1s (19.2 kB/s)
Reading package lists… Done
Reading package lists… Done
Building dependency tree… Done
Reading state information… Done
The following package was automatically installed and is no longer required:
libfuse2
Use ‘sudo apt autoremove’ to remove it.
The following additional packages will be installed:
libc-ares2 libjs-highlight.js libnode72 nodejs-doc
Suggested packages:
npm
The following NEW packages will be installed:
libc-ares2 libjs-highlight.js libnode72 nodejs nodejs-doc
0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded.
Need to get 10.4 MB of archives.
After this operation, 45.6 MB of additional disk space will be used.
Get:1 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf libc-ares2 armhf 1.17.1-1+deb11u3 [96.3 kB]
Get:2 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf libjs-highlight.js all 9.18.5+dfsg1-1 [397 kB]
Get:3 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf libnode72 armhf 12.22.12~dfsg-1~deb11u4 [7,261 kB]
Get:4 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf nodejs armhf 12.22.12~dfsg-1~deb11u4 [148 kB]
Get:5 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf nodejs-doc all 12.22.12~dfsg-1~deb11u4 [2,547 kB]
Fetched 10.4 MB in 8s (1,314 kB/s)
Selecting previously unselected package libc-ares2:armhf.
(Reading database … 106649 files and directories currently installed.)
Preparing to unpack …/libc-ares2_1.17.1-1+deb11u3_armhf.deb …
Unpacking libc-ares2:armhf (1.17.1-1+deb11u3) …
Selecting previously unselected package libjs-highlight.js.
Preparing to unpack …/libjs-highlight.js_9.18.5+dfsg1-1_all.deb …
Unpacking libjs-highlight.js (9.18.5+dfsg1-1) …
Selecting previously unselected package libnode72:armhf.
Preparing to unpack …/libnode72_12.22.12~dfsg-1~deb11u4_armhf.deb …
Unpacking libnode72:armhf (12.22.12~dfsg-1~deb11u4) …
Selecting previously unselected package nodejs.
Preparing to unpack …/nodejs_12.22.12~dfsg-1~deb11u4_armhf.deb …
Unpacking nodejs (12.22.12~dfsg-1~deb11u4) …
Selecting previously unselected package nodejs-doc.
Preparing to unpack …/nodejs-doc_12.22.12~dfsg-1~deb11u4_all.deb …
Unpacking nodejs-doc (12.22.12~dfsg-1~deb11u4) …
Setting up libc-ares2:armhf (1.17.1-1+deb11u3) …
Setting up libnode72:armhf (12.22.12~dfsg-1~deb11u4) …
Setting up libjs-highlight.js (9.18.5+dfsg1-1) …
Setting up nodejs (12.22.12~dfsg-1~deb11u4) …
update-alternatives: using /usr/bin/nodejs to provide /usr/bin/js (js) in auto mode
Setting up nodejs-doc (12.22.12~dfsg-1~deb11u4) …
Processing triggers for man-db (2.9.4-2) …
Processing triggers for libc-bin (2.31-13+rpt2+rpi1+deb11u7) …
Check current Node installation …
Node currently installed. Checking version number.
Minimum Node version: v20.8.0
Installed Node version: v12.22.12
Node should be upgraded.
Installing Node.js …
Reading package lists… Done
Building dependency tree… Done
Reading state information… Done
The following packages were automatically installed and are no longer required:
libc-ares2 libfuse2 libjs-highlight.js
Use ‘sudo apt autoremove’ to remove them.
The following packages will be REMOVED:
libnode72 nodejs-doc
The following packages will be upgraded:
nodejs
1 upgraded, 0 newly installed, 2 to remove and 0 not upgraded.
Need to get 27.0 MB of archives.
After this operation, 140 MB of additional disk space will be used.
Get:1 https://deb.nodesource.com/node_20.x bullseye/main armhf nodejs armhf 20.5.1-deb-1nodesource1 [27.0 MB]
Fetched 27.0 MB in 4s (6,062 kB/s)
apt-listchanges: Reading changelogs…
(Reading database … 107012 files and directories currently installed.)
Removing nodejs-doc (12.22.12~dfsg-1~deb11u4) …
dpkg: libnode72:armhf: dependency problems, but removing anyway as you requested:
nodejs depends on libnode72 (= 12.22.12~dfsg-1~deb11u4).

Removing libnode72:armhf (12.22.12~dfsg-1~deb11u4) …
(Reading database … 106824 files and directories currently installed.)
Preparing to unpack …/nodejs_20.5.1-deb-1nodesource1_armhf.deb …
Unpacking nodejs (20.5.1-deb-1nodesource1) over (12.22.12~dfsg-1~deb11u4) …
Setting up nodejs (20.5.1-deb-1nodesource1) …
Processing triggers for libc-bin (2.31-13+rpt2+rpi1+deb11u7) …
Processing triggers for man-db (2.9.4-2) …
Reading package lists… Done
Building dependency tree… Done
Reading state information… Done
nodejs is already the newest version (20.5.1-deb-1nodesource1).
The following packages were automatically installed and are no longer required:
libc-ares2 libfuse2 libjs-highlight.js
Use ‘sudo apt autoremove’ to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Node.js installation Done! version=v20.5.1
Check current NPM installation …
NPM currently installed. Checking version number.
Minimum npm version: V10.1.0
Installed npm version: V9.8.0
npm should be upgraded.
Installing npm …
E: Unable to correct problems, you have held broken packages.
npm WARN EBADENGINE Unsupported engine {
npm WARN EBADENGINE package: ‘npm@1.4.29’,
npm WARN EBADENGINE required: { node: ‘>=0.8’, npm: ‘1’ },
npm WARN EBADENGINE current: { node: ‘v20.5.1’, npm: ‘9.8.0’ }
npm WARN EBADENGINE }
evalmachine.:43
} = primordials;
^

ReferenceError: primordials is not defined
at evalmachine.:43:5
at Object. (/usr/lib/node_modules/npm/node_modules/graceful-fs/fs.js:11:8)
at Module._compile (node:internal/modules/cjs/loader:1233:14)
at Module._extensions…js (node:internal/modules/cjs/loader:1287:10)
at Module.load (node:internal/modules/cjs/loader:1091:32)
at Module._load (node:internal/modules/cjs/loader:938:12)
at Module.require (node:internal/modules/cjs/loader:1115:19)
at require (node:internal/modules/helpers:130:18)
at Object. (/usr/lib/node_modules/npm/node_modules/graceful-fs/graceful-fs.js:3:27)
at Module._compile (node:internal/modules/cjs/loader:1233:14)

Node.js v20.5.1
npm installation Done! version=V
Cloning MagicMirror …
Cloning into ‘MagicMirror’…
remote: Enumerating objects: 376, done.
remote: Counting objects: 100% (376/376), done.
remote: Compressing objects: 100% (311/311), done.
remote: Total 376 (delta 69), reused 200 (delta 49), pack-reused 0
Receiving objects: 100% (376/376), 427.18 KiB | 4.36 MiB/s, done.
Resolving deltas: 100% (69/69), done.
Cloning MagicMirror Done!
Installing dependencies …
bash: line 456: [: -ge: unary operator expected
evalmachine.:43
} = primordials;
^

ReferenceError: primordials is not defined
at evalmachine.:43:5
at Object. (/usr/lib/node_modules/npm/node_modules/graceful-fs/fs.js:11:8)
at Module._compile (node:internal/modules/cjs/loader:1233:14)
at Module._extensions…js (node:internal/modules/cjs/loader:1287:10)
at Module.load (node:internal/modules/cjs/loader:1091:32)
at Module._load (node:internal/modules/cjs/loader:938:12)
at Module.require (node:internal/modules/cjs/loader:1115:19)
at require (node:internal/modules/helpers:130:18)
at Object. (/usr/lib/node_modules/npm/node_modules/graceful-fs/graceful-fs.js:3:27)
at Module._compile (node:internal/modules/cjs/loader:1233:14)

Node.js v20.5.1
Unable to install dependencies!

Version info:

v1.0.3 - added default layout style (‘horizontal’ or ‘vertical’)

GitHub Repository

@Jonae

Version info:

Version info:

v1.0.0 - Initial release
v1.0.1 - Added option to modify the color of the temperature and humidity icons
              - Added option to modify the header size
v1.0.2 - Fix the error readings from sensor
              - Added option to calibrate the sensor readings
              - Added option to change units: C or F

GitHub Repository

@BKeyport said in MMM-DHT22:

@Jonae Nicely done.

I’ve used MMM-CommandToNotifcation/MMM-ValuesByNotification for mine, with MMM-Temperature prior to that. Nice to have a specific to device module, though. :)

Thanks for apreciations.

@ankonaskiff17 said in MMM-DHT22:

@Jonae Have you by chance done or looked at any sensors that use I2C?

No