Hi @sdetweil , Thanks for replying.

I am trying to migrate from the currentweather and weatherforcast modules to the new weather module.

I am using the MMM-Carousel module. It seemed strange (to me) to use the same module name. I was attempting to show the weather module with type=current on one slide and the weather module with type=forecast on another slide but with the same position. There didn’t seem to be any way to do this. I’ve since modified the config to use different positions so that a slide shows both current and forecast using the different positions.

It kinda works as I am getting the correct header but it just shows “Loading…” ,

Here is my config of MMM-Carousel:

{ 
 module: "MMM-Carousel",
 config: { 
          transitionInterval: 10000, 
          ignoreModules: ['alert', 'updatenotification', 'MMM-NewsFeedTicker'],
          mode: 'slides',
          slides: [
                   ['clock', 'calendar'],
                   ['clock', 'calendar', 'MMM-NetworkScanner'],
                   ['currentweather', 'weatherforecast', 'MMM-NetworkScanner'],
                   ['currentweather', 'weatherforecast', 'compliments'],
                   ['clock', 'calendar', 'compliments'],
                   ['clock', 'calendar', 'MMM-MoonPhase'],
                   ['currentweather', 'weatherforecast', 'MMM-MoonPhase'],
                   ['currentweather', 'weatherforecast']
         ]
 }
},

Can someone think of a way to use the new weather module in situation?

I saw the following error msgs:

[21.04.2021 15:12.39.799] [LOG]   Connecting socket for: currentweather
[21.04.2021 15:12.39.800] [WARN]  The module 'currentweather' is deprecated in favor of the 'weather'-module, please refer to the documentation for a migration path
[21.04.2021 15:12.39.802] [LOG]   Connecting socket for: weatherforecast
[21.04.2021 15:12.39.803] [WARN]  The module 'weatherforecast' is deprecated in favor of the 'weather'-module, please refer to the documentation for a migration path

So I started looking at the documentation.

I couldn’t find how to specify the forecast weather type for one slide, and the current weather type for another slide in the MMM-Carousel which my MM currently uses.

Can somebody tell me?

Is it bad to have this?

pi@raspberrypi ~ % sudo -l|grep NOPASS
    (ALL) NOPASSWD: ALL
pi@raspberrypi ~ %

Edit: To expand further, I have MMM-NetworkScanner running. I do not need to supply a password when I run sudo and I don’t have a password stored in a config file.

@bkrand95 said in Black screen on start up of Magic Mirror:

module: ‘MMM-Remote-Control’,
uncomment the following line to show the URL of the remote control on the mirror
position: ‘bottom_left’

The line after MMM-Remote-Control should be a comment,
and there should be a comma after the ‘bottom_left’.

@NathTheDude If you start a terminal on one desktop and run:

echo $DISPLAY

Then start a terminal on the other desktop and run:

echo $DISPLAY

do you get the same results?

@NathTheDude The 2nd monitor should be display 0, screen 1. Use this:

DISPLAY=:0.1

@sdetweil

Isn’t the default localhost?
General property option

On my rpi I get the ::1 IPv6 address

pi@raspberrypi ~ % getent hosts localhost
::1             localhost ip6-localhost ip6-loopback
pi@raspberrypi ~ % 

Both IPv4 and IPv6 addresses are in my local /etc/hosts file:

pi@raspberrypi ~ % grep localhost /etc/hosts
127.0.0.1       localhost
::1             localhost ip6-localhost ip6-loopback
pi@raspberrypi ~ %

@Mr-Gysy
config.js has a typo

adresss: “0.0.0.0”,  

should be.

address: “0.0.0.0”,  

@SARCux

A previous post showed how to change the color of the icons for the currentweather/weatherforcast modules here: colors-changed

As Far As I Know, setting colored: true changes the color of the min/max temperature listing.