I installed MMM-FOSHKplugin-PWS-Observations to get data from my Ecowitt WS 90 via a GW 3000. Everything works when dealing directly with the gateway. When I installed FOSHKplugin I first tried the stable version and then tried the beta version 0.10 and it installed and setup correctly as far as I can tell. When I installed MMM-FOSHKplugin-PWS-Observations and configured it all I get is a screen saying "loading’. I have tried running with and without a password with the same results. I realize there is a lot of data here, I did not know what all you may need. Thanks for your help. Ron R MM log sample [2026-01-15 16:23:34.180] [LOG] http://192.168.1.41/observationscurrent?stationId=FOSHKplug1n&format=json&units=e&apiKey=MMM [2026-01-15 16:23:34.386] [LOG] 2026-01-15T16:23:34-05:00 6 MMM-FOSHKplugin-PWS-Observations: null [2026-01-15 16:24:34.408] [LOG] http://192.168.1.41/observationscurrent?stationId=FOSHKplug1n&format=json&units=e&apiKey=MMM [2026-01-15 16:24:34.433] [LOG] 2026-01-15T16:24:34-05:00 6 MMM-FOSHKplugin-PWS-Observations: null raw-FOSHKplugin-log 15.01.2026 16:57:03.702 PASSKEY=F3A801EBFF64DA4DF14E6F3E25A21A9C&stationtype=GW3000B_V1.0.9&runtime=43328&heap=76804&dateutc=2026-01-15+21:57:03&tempinf=71.78&humidityin=42&baromrelin=29.858&baromabsin=29.858&tempf=49.28&humidity=43&vpd=0.201&winddir=43&windspeedmph=2.91&windgustmph=3.80&maxdailygust=16.11&solarradiation=15.79&uv=0&rrain_piezo=0.000&erain_piezo=0.000&hrain_piezo=0.000&drain_piezo=0.264&wrain_piezo=0.374&mrain_piezo=0.374&yrain_piezo=0.374&srain_piezo=0&ws90cap_volt=5.2&ws90_ver=155&wh90batt=3.22&freq=915M&model=GW3000B&interval=60&isintvl=60&isintvl10=60&dewptf=27.7&windchillf=49.3&feelslikef=49.3&heatindexf=45.9&windspdmph_avg10m=2.9&winddir_avg10m=41&windgustmph_max10m=6.9&windrun=28.17&brightness=2000.6&sunhours=1.5&sunshine=0&srsum=1429.84 15.01.2026 16:58:03.504 PASSKEY=F3A801EBFF64DA4DF14E6F3E25A21A9C&stationtype=GW3000B_V1.0.9&runtime=43388&heap=76804&dateutc=2026-01-15+21:58:03&tempinf=71.60&humidityin=42&baromrelin=29.852&baromabsin=29.852&tempf=49.10&humidity=42&vpd=0.203&winddir=19&windspeedmph=2.24&windgustmph=3.80&maxdailygust=16.11&solarradiation=15.63&uv=0&rrain_piezo=0.000&erain_piezo=0.000&hrain_piezo=0.000&drain_piezo=0.264&wrain_piezo=0.374&mrain_piezo=0.374&yrain_piezo=0.374&srain_piezo=0&ws90cap_volt=5.2&ws90_ver=155&wh90batt=3.22&freq=915M&model=GW3000B&interval=60&isintvl=60&isintvl10=60&dewptf=27.0&windchillf=49.1&feelslikef=49.1&heatindexf=45.7&windspdmph_avg10m=2.6&winddir_avg10m=39&windgustmph_max10m=6.9&windrun=28.21&brightness=1980.3&sunhours=1.5&sunshine=0&srsum=1430.1 log-foshkplugin.log 14.01.2026 17:50:47.693 <OK> FOSHKplugin v0.10 Beta 251130 started 14.01.2026 17:50:47.693 <OK> using configuration file /opt/FOSHKplugin/foshkplugin.conf 14.01.2026 17:50:47.693 <OK> log level set to ALL (out of ERROR, WARNING, INFO, ALL (default)) 14.01.2026 17:50:47.693 <OK> Logging is globally enabled (loglog: True, sndlog: True, rawlog: True; loglevel: ALL - to disable set LOG_ENABLE = False in config 14.01.2026 17:50:47.693 <OK> storm warning activated, will warn if air pressure rises/drops more than 1.75 hPa/hour or 3.75hPa/3hr with expiry time of 60 minutes 14.01.2026 17:50:47.693 <OK> report watchdog activated, will warn if weather station did not report within 3 send-intervals 14.01.2026 17:50:47.694 <OK> battery warning enabled, will warn if battery level of all known sensors is critical - to disable set BATTERY_WARNING = False in config 14.01.2026 17:50:47.694 <OK> thunderstorm warning activated, will warn if lightning sensor WH57 present, count of lightnings is more than 1 and distance is less or equal 30km with expiry time of 15 minutes 14.01.2026 17:50:47.694 <OK> leakage warning disabled - to enable set LEAKAGE_WARNING = True in config 14.01.2026 17:50:47.694 <OK> CO2 warning disabled - to enable set CO2_WARNING = True in config 14.01.2026 17:50:47.694 <OK> interval warning disabled - to enable set INTVL_WARNING = True in config 14.01.2026 17:50:47.694 <OK> reboot warning enabled, will warn if station reboot is detected via key runtime - to disable set REBOOT_WARNING = False in config 14.01.2026 17:50:47.694 <OK> automatic save/restore for lightning-data enabled - to disable set FIX_LIGHTNING = False in config 14.01.2026 17:50:47.694 <OK> additional dew point calculation (indoor sensor, WH31, WH45) is deactivated - to enable set Export\ADD_DEWPT = True in config 14.01.2026 17:50:47.694 <OK> additional spread calculation (indoor sensor, WH31, WH45) is deactivated - to enable set Export\ADD_SPREAD = True in config 14.01.2026 17:50:47.694 <OK> additional VPD calculation (indoor sensor, WH31, WH45) is deactivated - to enable set Export\ADD_VPD = True in config 14.01.2026 17:50:47.694 <OK> additional output of the signal quality is deactivated - to enable set Export\ADD_SIGNAL = True in config 14.01.2026 17:50:47.694 <OK> FWD warning enabled, warns if a forward had 10 (specified globally or individually by FWD_WARNINT) unsuccessful attempts - to disable set FWD_WARNING = False in config 14.01.2026 17:50:47.694 <OK> IoT processing disabled - to enable set IoT\IOT_ENABLE = True in config 14.01.2026 17:50:47.935 <OK> local http-socket *:8081 bound 14.01.2026 17:50:47.936 <OK> local UDP-socket *:12340 bound 14.01.2026 17:50:47.936 <OK> remote UDP: :12340 - only changes (fragmented max len 2000) 14.01.2026 17:50:47.937 <OK> firmware update check activated with interval 86400 - to disable set UPD_CHECK = False in config 14.01.2026 17:50:53.408 <WARNING> firmware update for GW3000 available - current: GW3000B_V1.0.9 avail: GW3000B_V1.1.5 - use the <a href="http://192.168.1.41/">WebUI</a> or WSView Plus to update! 14.01.2026 17:50:53.408 <WARNING> -Supports soil moisture & EC sensor (WH52) 14.01.2026 17:51:31.234 get-request from 192.168.1.122: /FOSHKplugin/state 14.01.2026 17:53:13.156 <OK> enable custom server on WS 192.168.1.41:45000; sending to 192.168.1.122:8081 in Ecowitt format every 60sec: ok 15.01.2026 04:41:21.628 <WARNING> possible storm - air pressure has dropped more than 1.75 hPa within one hour! (14.01.2026 19:59:21: 1008.9 --> 1005.5 diff: -3.4hPa) 15.01.2026 04:45:58.536 <OK> local UDP-socket *:12340 closed 15.01.2026 04:45:58.538 <OK> wrote stundenwerte to /opt/FOSHKplugin/FOSHKplugin-8081-stundenwerte.pkl (180) 15.01.2026 04:45:58.538 <OK> wrote min/max values to /opt/FOSHKplugin/FOSHKplugin-8081-minmax.pkl (262) 15.01.2026 04:45:58.538 <OK> wrote lasthour data to /opt/FOSHKplugin/FOSHKplugin-8081-lasthour.pkl (10) 15.01.2026 04:45:58.539 <OK> FOSHKplugin v0.10 Beta 251130 stopped 15.01.2026 04:46:27.695 <OK> FOSHKplugin v0.10 Beta 251130 started 15.01.2026 04:46:27.696 <OK> using configuration file /opt/FOSHKplugin/foshkplugin.conf 15.01.2026 04:46:27.696 <OK> log level set to ALL (out of ERROR, WARNING, INFO, ALL (default)) 15.01.2026 04:46:27.696 <OK> Logging is globally enabled (loglog: True, sndlog: True, rawlog: True; loglevel: ALL - to disable set LOG_ENABLE = False in config 15.01.2026 04:46:27.696 <OK> loaded stundenwerte data from /opt/FOSHKplugin/FOSHKplugin-8081-stundenwerte.pkl (180) 15.01.2026 04:46:27.696 <OK> storm warning activated, will warn if air pressure rises/drops more than 1.75 hPa/hour or 3.75hPa/3hr with expiry time of 60 minutes 15.01.2026 04:46:27.696 <OK> loaded lasthour data from /opt/FOSHKplugin/FOSHKplugin-8081-lasthour.pkl (10) 15.01.2026 04:46:27.696 <OK> loaded min/max values from /opt/FOSHKplugin/FOSHKplugin-8081-minmax.pkl (262) 15.01.2026 04:46:27.696 <OK> report watchdog activated, will warn if weather station did not report within 3 send-intervals 15.01.2026 04:46:27.696 <OK> battery warning enabled, will warn if battery level of all known sensors is critical - to disable set BATTERY_WARNING = False in config 15.01.2026 04:46:27.696 <OK> thunderstorm warning activated, will warn if lightning sensor WH57 present, count of lightnings is more than 1 and distance is less or equal 30km with expiry time of 15 minutes 15.01.2026 04:46:27.696 <OK> leakage warning disabled - to enable set LEAKAGE_WARNING = True in config 15.01.2026 04:46:27.696 <OK> CO2 warning disabled - to enable set CO2_WARNING = True in config 15.01.2026 04:46:27.696 <OK> interval warning disabled - to enable set INTVL_WARNING = True in config 15.01.2026 04:46:27.696 <OK> reboot warning enabled, will warn if station reboot is detected via key runtime - to disable set REBOOT_WARNING = False in config 15.01.2026 04:46:27.696 <OK> automatic save/restore for lightning-data enabled - to disable set FIX_LIGHTNING = False in config 15.01.2026 04:46:27.696 <OK> additional dew point calculation (indoor sensor, WH31, WH45) is deactivated - to enable set Export\ADD_DEWPT = True in config 15.01.2026 04:46:27.696 <OK> additional spread calculation (indoor sensor, WH31, WH45) is deactivated - to enable set Export\ADD_SPREAD = True in config 15.01.2026 04:46:27.696 <OK> additional VPD calculation (indoor sensor, WH31, WH45) is deactivated - to enable set Export\ADD_VPD = True in config 15.01.2026 04:46:27.697 <OK> additional output of the signal quality is deactivated - to enable set Export\ADD_SIGNAL = True in config 15.01.2026 04:46:27.697 <OK> FWD warning enabled, warns if a forward had 10 (specified globally or individually by FWD_WARNINT) unsuccessful attempts - to disable set FWD_WARNING = False in config 15.01.2026 04:46:27.697 <OK> IoT processing disabled - to enable set IoT\IOT_ENABLE = True in config 15.01.2026 04:46:27.697 <OK> local http-socket 192.168.1.122:8081 bound 15.01.2026 04:46:27.697 <OK> local UDP-socket 192.168.1.122:12341 bound 15.01.2026 04:46:27.697 <OK> remote UDP-sending disabled 15.01.2026 04:46:27.697 <OK> firmware update check activated with interval 86400 - to disable set UPD_CHECK = False in config 15.01.2026 04:55:06.120 <WARNING> reboot of weather station detected (1) - last runtime: 127682 current runtime: 8 15.01.2026 06:40:06.047 <RESTORED> storm warning cancelled after 118 minutes (15.01.2026 05:41:06: 1005.7 --> 1007.2 diff: 1.5hPa) 15.01.2026 08:02:40.861 <WARNING> weather station has not reported data for more than 180 seconds (3 send-intervals) 15.01.2026 08:03:40.865 <RESTORED> weather station has reported data again 15.01.2026 08:06:03.693 <WARNING> possible storm - air pressure has risen more than 1.75 hPa within one hour! (15.01.2026 06:25:06: 1006.6 --> 1008.5 diff: 1.9hPa) System Information MM V 2.33.0 Dell inspiron 16, 32GB Memory Ubuntu 24.04 Docker version 29.1.4, build 0e6fee6 Ecowitt Gateway GW3000 with WS90 weather station

@RonR ctrl-+. Should zoom in

@RonR mine matches yours, since 1974… not so much weird as exciting newness

@RonR said in MMM-BackgroundSlideShow cutting off top of pics: MMM-ImagesPhotos doesn’t have a path property it is hard coded to ‘uploads’

Yes, that fixed it . Thanks for the help.

@TAGinside said in MMM-ISS-Live error 153: @karsten13 @karsten13 made some changes to the environment of the module on github, I reloaded the module and the error is gone. Thanks for the help, sorry it took so long to acknowledge the fix.

@RonR you opened this in general, not troubleshooting, so it can’t be closed

@OrangeMirror the current docker setup will only work for multiple instances IF you use the MM_CONFIG_FILE environment variable to run instances off different config files, or the MM_PORT env variable to override the port if using the same config.js all the files will come from the ONE folder tree ~/magicmirror so this means you would have to setup multiple entries in the compose.yaml to launch multiple instances (with the different config parms) You have to change the container name too this is because all the DATA used by the container is external (on docker host filesystem) and not IN the container an example NOT using docker, but same idea here https://docs.magicmirror.builders/configuration/introduction.html#advanced-configuration-and-frequently-asked-how-to-configure-examples

@RonR there a bunch of config options not listed in the readme i think showMarquee:false [image: 1754787212070-img_2117.png]

OK, that helps make sense now. Thanks

@RonR i dont know that module. we provide support for google calendars as part of the base package. get the ical format url, public or private and put that in the url: property see the startup config.js which uses a calendarlabs url to get the url open your calendar in a web browser, select the specific source in the left nav, click the 3 dot menu to the right, settings scroll down to sharing, select the ical format url (not embed) or secret url