@paphko With you Update everything works as expected!!!

Again, thank you very much for your help and the effort you put in your module!

Best regards
Schummi

@paphko With you Update everything works as expected!!!

Again, thank you very much for your help and the effort you put in your module!

Best regards
Schummi

@paphko Thank you very much for your effort. I’ll give it a try and report on the outcome!

@paphko I tried you hint with the following result:

[{"link":"http://192.168.2.122:8080/rest/items/ExtendedColorLight_Color","state":"ON","type":"Switch","name":"ExtendedColorLight_Color","label":"Color","category":"ColorLight","tags":[],"groupNames":[]},{"link":"http://192.168.2.122:8080/rest/items/SOFA_Switch","state":"ON","type":"Switch","name":"SOFA_Switch","label":"Color","category":"ColorLight","tags":[],"groupNames":[]},{"link":"http://192.168.2.122:8080/rest/items/SOFA_Color","state":"274,87,24","type":"Color","name":"SOFA_Color","label":"Color","category":"ColorLight","tags":[],"groupNames":[]},{"link":"http://192.168.2.122:8080/rest/items/SOFA_ColorTemperature","state":"0","type":"Dimmer","name":"SOFA_ColorTemperature","label":"Color Temperature","category":"ColorLight","tags":[],"groupNames":[]}]

Basically it shows two items at the moment, both created with PaperUI. I still don’t undertsand why the file based setup/configuration is not working. I wouldn’t mind if th efloorplan integration would work but still doesn’t. I added the two items to the config.js but without success. I checked the pm2 logs to see the follwoing error:

0|mm       | TypeError: Cannot read property 'statusCode' of undefined
0|mm       |     at Request._callback (/home/pi/MagicMirror/modules/mmm-openhabfloorplan/node_helper.js:38:65)
0|mm       |     at self.callback (/home/pi/MagicMirror/node_modules/request/request.js:186:22)
0|mm       |     at emitOne (events.js:96:13)
0|mm       |     at Request.emit (events.js:188:7)
0|mm       |     at Request.onRequestError (/home/pi/MagicMirror/node_modules/request/request.js:845:8)
0|mm       |     at emitOne (events.js:96:13)
0|mm       |     at ClientRequest.emit (events.js:188:7)
0|mm       |     at Socket.socketErrorListener (_http_client.js:308:9)
0|mm       |     at emitOne (events.js:96:13)
0|mm       |     at Socket.emit (events.js:188:7)

Note: I already modified the mmm-openhabfloorplan.js according to your other thread. Unfortunatelly I cannot attach the files here - If required I can post the sourcecode.

Any idea ?

Cheers
Schummi

@paphko thanks for the hint. I will try it this afternoon and come back with the result.

Update:
I reinstalled a clean Jessie on the Raspi and installed Openhab according to the guide on the openhab.org homepage.

This time I did not install anything via PAPERUI besides the HUE Binding. I copied my item/things/sitemap files as described above to the openhab2 folder.

Checking the PAPERUI on localhost:8080 shows that the the bridge and lights get listet under the THINGS menue but no items appear.

When I link one of the lights with a “new item” I can see the item but with a confusing name. I can control it with openhab though.

Your hint with checking the status in the browser just gives me this:

{
http://192.168.2.122:8080/rest/items/L_HUE_STRIP_Toggle 

 "error": {
    "message": "Item L_HUE_STRIP_Toggle does not exist!",
    "http-code": 404
  }
}

Accordingly in the Magicmirror no connection is made.

Is this a basic OpenHab setup or configuration error?

Note: trying to change the name of the item manually resutls in a “conflict error”

Sorry for the long post. Any help is appreciated!

Cheers
Schummi

As additional Information here my OpenHab configuration:

lights.things
Bridge hue:bridge:1 [ ipAddress="192.168.2.100" ] 
{
	0100	L_HUE_BEDROOM_WHITE_Toggle 	[ lightId="1" ]
	0210	L_HUE_BEDROOM_COLOR_Toggle 	[ lightId="2" ]
	0210	L_HUE_STRIP_Toggle 		[ lightId="3" ]
	0210	L_HUE_WZ-MITTE_Toggle 		[ lightId="4" ]
	0210	L_HUE_ZELT_Toggle 		[ lightId="5" ]
	0200	L_HUE_IRIS_Toggle		[ lightId="6" ]
	0210	L_HUE_SOFA_Toggle 		[ lightId="7" ]
	0210	L_HUE_ESSECKE_Toggle 		[ lightId="8" ]
	0100	L_HUE_ESSTISCH_Toggle 		[ lightId="9" ]
	0100	L_HUE_KUECHE_Toggle		[ lightId="10" ]

}

//----------------------------------------------
lights.sitemap
sitemap lights label="Main Menu"
{
	Frame {
		Switch item=	L_HUE_SOFA_Toggle
		Switch item= 	L_HUE_SOFA_Toggle 		
		Switch item=	L_HUE_STRIP_Toggle 		
		Switch item=	L_HUE_ZELT_Toggle 		
		Switch item=	L_HUE_IRIS_Toggle 		
		Switch item= 	L_HUE_ESSECKE_Toggle 	
		Switch item=	L_HUE_ESSTISCH_Toggle 	
		Switch item= 	L_HUE_WZ-MITTE_Toggle 	
		Switch item=	L_HUE_KUECHE_Toggle 	
		Switch item= 	L_HUE_BEDROOM_COLOR_Toggle 	
		Switch item= 	L_HUE_BEDROOM_WHITE_Toggle 		
	}
}

//----------------------------------------------
Lights.item

//=====SWITCHES======================================
Switch 		L_HUE_BEDROOM_WHITE_Toggle 	{ channel="hue:0100:0017881c28a8:1:brightness" }
Switch 		L_HUE_BEDROOM_COLOR_Toggle 	{ channel="hue:0210:0017881c28a8:2:color" }
Switch 		L_HUE_STRIP_Toggle 		{ channel="hue:0210:0017881c28a8:3:color" }
Switch 		L_HUE_WZ-MITTE_Toggle 		{ channel="hue:0210:0017881c28a8:4:color" }
Switch 		L_HUE_ZELT_Toggle 		{ channel="hue:0210:0017881c28a8:5:color" }
Switch 		L_HUE_IRIS_Toggle 		{ channel="hue:0200:0017881c28a8:6:color" }
Switch 		L_HUE_SOFA_Toggle 		{ channel="hue:0210:0017881c28a8:7:color" }
Switch 		L_HUE_ESSECKE_Toggle 		{ channel="hue:0210:0017881c28a8:8:color" }
Switch 		L_HUE_ESSTISCH_Toggle 		{ channel="hue:0100:0017881c28a8:9:brightness" }
Switch 		L_HUE_KUECHE_Toggle 		{ channel="hue:0100:0017881c28a8:10:brightness" }

Strangly the Config via files seems not to work as the “L_ZELT” item was configured via the PAPERUI and the files are obviously ignored:

http://192.168.2.122:8080/rest/items/L_HUE_ZELT_Toggle

{
  "error": {
    "message": "Item L_HUE_ZELT_Toggle does not exist!",
    "http-code": 404
  }
}

I found the Openhab on the raspberry in:

/etc/openhab2

Is this the correct location?

Thanks for any help!

@paphko When I adjust your link with one of my items I get the following result:

{
  "link": "http://192.168.2.122:8080/rest/items/L_ZELT",
  "state": "ON",
  "type": "Switch",
  "name": "L_ZELT",
  "label": "Switch_Zelt",
  "category": "Light",
  "tags": [],
  "groupNames": []
}

Adding the Light in the config.js is still not working.

Here the config code:

	//------------- OPENHAB FLOORPLAN ----------------------------------------------------------

	 {
        module: 'mmm-openhabfloorplan',
        position: 'bottom_center', // this can be any of the regions
        config: {
            updateInterval: 60 * 60 * 1000, // refreshing all windows / lights / labels once per hour; 0 to disable periodic update
            draft: false, // if true, all lights, windows, and label names are shown; if false, get states from openhab
            openhab: {
                url: "http://localhost:8080", // must not have a trailing slash!
            },
            floorplan: {
                image: "egog2.png", // image in subfolder 'images'; change to floorplan.png to avoid git repository changes
                width: 800, // this must be the width of the image above
                height: 333, // this must be the height of the image above
            },
             light: { // this part shows default settings for lights; may optionally be overwritten
              image: "light.png", // located in subfolder 'images'
              width: 19, // image width
              height: 19, // image height
             },

   		lights: { // list all light items to be shown (must be of openhab type Switch or Dimmer)
               
		//=== ERDGESCHOSS ================
		L_ZELT: {left:200, top:05},
		
//ALTERNATIVEITEM CODE
L_ZELT_Toggle: {left:200, top:05},
		
            },
            windows: { // list all window / door contacts to be shown (must be of openhab type Switch or Contact)
                // openhab item: left, top, radius (draws quadrant), midPoint, and optionally counterwindow and color
                // Reed_Sleeping_right: { left: 12,  top: 231, radius: 30, midPoint: "top-left" },
                // openhab item: left, top, width, height (draws rectangle), and optionally color
                // Reed_Sleeping_left:  { left: 90,  top: 301, width: 37, height: 20 },
            },
            labels: { // list all strings to be shown (may probably be any openhab type, resonable for String and Number)
                // openhab item: left, top, and optionally color, font size, prefix, postfix, and number of decimals for floating numbers
                //Temperature_Entry:          { left: 162, top: 280 },
                //Temperature_Bath:           { left: 277, top: 280, postfix: "°C", decimals: 1 },
            }
        

	}
    },

Configuring the module as draft shows all configured lights correctly.

Is there anything I am missing?

@YourhighnessLeender
Having the same issue here with OpenHab2 running on a seperate Pi. I am using Philipps Hue and can control the lights via OpenHab but I cannot get the states with the Magic Mirror.

Anyone have any suggestions?