MMM-OpenhabFloorplan

paphko · Sep 15, 2016, 8:23 AM

@Mitchfarino said in MMM-OpenhabFloorplan:

I’ve not really looked at openhab - what do you have in your current set up?

I use Anel and MiLight for the lights, OneWire for temperatures, and a shell script for setting reed contacts via REST API.

shashank · Sep 20, 2016, 3:28 AM

@paphko I have Vera Edge Zwave home automation installed in my house, any possibility to get the information of the lights Status on the Mirror.

paphko · Sep 20, 2016, 10:10 AM

@shashank If you get the light states in openhab, then yes. But I don’t have any experience with Zwave devices on openhab, I would suggest to research in the openhab community and ask there how to set it up: https://community.openhab.org

YourhighnessLeender · Jan 24, 2017, 2:49 PM

Hola! Anyone got the floor plan working with openHab2? I’m so close, but can’t seem to get any statuses from openHab (I think). I’m sort of a noob so I might be doing something wrong.

schummi84 · Mar 1, 2017, 5:31 AM

@YourhighnessLeender
Having the same issue here with OpenHab2 running on a seperate Pi. I am using Philipps Hue and can control the lights via OpenHab but I cannot get the states with the Magic Mirror.

Anyone have any suggestions?

paphko · Mar 1, 2017, 5:31 AM

@schummi84 did you try the adjustments explained in this issue? https://github.com/paphko/mmm-openhabfloorplan/issues/1

paphko · Mar 6, 2017, 9:01 PM

@schummi84 Please make sure your openhab installation has the REST API installed/enabled. You can check that in a browser, e.g.: http://localhost:8080/rest/items/Light_Garden_Garage
The result should be similar to this:

{
  "link": "http://localhost:8080/rest/items/Light_Garden_Garage",
  "state": "OFF",
  "type": "Switch",
  "name": "Light_Garden_Garage",
  "label": "Garage",
  "tags": [
    "Lighting"
  ],
  "groupNames": [
    "Garden",
    "Lights"
  ]
}

Does that work for you? If so, please write the URL of one of your items.

schummi84 · Mar 6, 2017, 9:01 PM

@paphko When I adjust your link with one of my items I get the following result:

{
  "link": "http://192.168.2.122:8080/rest/items/L_ZELT",
  "state": "ON",
  "type": "Switch",
  "name": "L_ZELT",
  "label": "Switch_Zelt",
  "category": "Light",
  "tags": [],
  "groupNames": []
}

Adding the Light in the config.js is still not working.

Here the config code:

	//------------- OPENHAB FLOORPLAN ----------------------------------------------------------

	 {
        module: 'mmm-openhabfloorplan',
        position: 'bottom_center', // this can be any of the regions
        config: {
            updateInterval: 60 * 60 * 1000, // refreshing all windows / lights / labels once per hour; 0 to disable periodic update
            draft: false, // if true, all lights, windows, and label names are shown; if false, get states from openhab
            openhab: {
                url: "http://localhost:8080", // must not have a trailing slash!
            },
            floorplan: {
                image: "egog2.png", // image in subfolder 'images'; change to floorplan.png to avoid git repository changes
                width: 800, // this must be the width of the image above
                height: 333, // this must be the height of the image above
            },
             light: { // this part shows default settings for lights; may optionally be overwritten
              image: "light.png", // located in subfolder 'images'
              width: 19, // image width
              height: 19, // image height
             },

   		lights: { // list all light items to be shown (must be of openhab type Switch or Dimmer)
               
		//=== ERDGESCHOSS ================
		L_ZELT: {left:200, top:05},
		
//ALTERNATIVEITEM CODE
L_ZELT_Toggle: {left:200, top:05},
		
            },
            windows: { // list all window / door contacts to be shown (must be of openhab type Switch or Contact)
                // openhab item: left, top, radius (draws quadrant), midPoint, and optionally counterwindow and color
                // Reed_Sleeping_right: { left: 12,  top: 231, radius: 30, midPoint: "top-left" },
                // openhab item: left, top, width, height (draws rectangle), and optionally color
                // Reed_Sleeping_left:  { left: 90,  top: 301, width: 37, height: 20 },
            },
            labels: { // list all strings to be shown (may probably be any openhab type, resonable for String and Number)
                // openhab item: left, top, and optionally color, font size, prefix, postfix, and number of decimals for floating numbers
                //Temperature_Entry:          { left: 162, top: 280 },
                //Temperature_Bath:           { left: 277, top: 280, postfix: "°C", decimals: 1 },
            }
        

	}
    },

Configuring the module as draft shows all configured lights correctly.

Is there anything I am missing?

schummi84 · Mar 6, 2017, 9:13 PM

As additional Information here my OpenHab configuration:

lights.things
Bridge hue:bridge:1 [ ipAddress="192.168.2.100" ] 
{
	0100	L_HUE_BEDROOM_WHITE_Toggle 	[ lightId="1" ]
	0210	L_HUE_BEDROOM_COLOR_Toggle 	[ lightId="2" ]
	0210	L_HUE_STRIP_Toggle 		[ lightId="3" ]
	0210	L_HUE_WZ-MITTE_Toggle 		[ lightId="4" ]
	0210	L_HUE_ZELT_Toggle 		[ lightId="5" ]
	0200	L_HUE_IRIS_Toggle		[ lightId="6" ]
	0210	L_HUE_SOFA_Toggle 		[ lightId="7" ]
	0210	L_HUE_ESSECKE_Toggle 		[ lightId="8" ]
	0100	L_HUE_ESSTISCH_Toggle 		[ lightId="9" ]
	0100	L_HUE_KUECHE_Toggle		[ lightId="10" ]

}

//----------------------------------------------
lights.sitemap
sitemap lights label="Main Menu"
{
	Frame {
		Switch item=	L_HUE_SOFA_Toggle
		Switch item= 	L_HUE_SOFA_Toggle 		
		Switch item=	L_HUE_STRIP_Toggle 		
		Switch item=	L_HUE_ZELT_Toggle 		
		Switch item=	L_HUE_IRIS_Toggle 		
		Switch item= 	L_HUE_ESSECKE_Toggle 	
		Switch item=	L_HUE_ESSTISCH_Toggle 	
		Switch item= 	L_HUE_WZ-MITTE_Toggle 	
		Switch item=	L_HUE_KUECHE_Toggle 	
		Switch item= 	L_HUE_BEDROOM_COLOR_Toggle 	
		Switch item= 	L_HUE_BEDROOM_WHITE_Toggle 		
	}
}

//----------------------------------------------
Lights.item

//=====SWITCHES======================================
Switch 		L_HUE_BEDROOM_WHITE_Toggle 	{ channel="hue:0100:0017881c28a8:1:brightness" }
Switch 		L_HUE_BEDROOM_COLOR_Toggle 	{ channel="hue:0210:0017881c28a8:2:color" }
Switch 		L_HUE_STRIP_Toggle 		{ channel="hue:0210:0017881c28a8:3:color" }
Switch 		L_HUE_WZ-MITTE_Toggle 		{ channel="hue:0210:0017881c28a8:4:color" }
Switch 		L_HUE_ZELT_Toggle 		{ channel="hue:0210:0017881c28a8:5:color" }
Switch 		L_HUE_IRIS_Toggle 		{ channel="hue:0200:0017881c28a8:6:color" }
Switch 		L_HUE_SOFA_Toggle 		{ channel="hue:0210:0017881c28a8:7:color" }
Switch 		L_HUE_ESSECKE_Toggle 		{ channel="hue:0210:0017881c28a8:8:color" }
Switch 		L_HUE_ESSTISCH_Toggle 		{ channel="hue:0100:0017881c28a8:9:brightness" }
Switch 		L_HUE_KUECHE_Toggle 		{ channel="hue:0100:0017881c28a8:10:brightness" }

Strangly the Config via files seems not to work as the “L_ZELT” item was configured via the PAPERUI and the files are obviously ignored:

http://192.168.2.122:8080/rest/items/L_HUE_ZELT_Toggle

{
  "error": {
    "message": "Item L_HUE_ZELT_Toggle does not exist!",
    "http-code": 404
  }
}

I found the Openhab on the raspberry in:

/etc/openhab2

Is this the correct location?

Thanks for any help!

schummi84 · Mar 8, 2017, 5:21 AM

Update:
I reinstalled a clean Jessie on the Raspi and installed Openhab according to the guide on the openhab.org homepage.

This time I did not install anything via PAPERUI besides the HUE Binding. I copied my item/things/sitemap files as described above to the openhab2 folder.

Checking the PAPERUI on localhost:8080 shows that the the bridge and lights get listet under the THINGS menue but no items appear.

When I link one of the lights with a “new item” I can see the item but with a confusing name. I can control it with openhab though.

Your hint with checking the status in the browser just gives me this:

{
http://192.168.2.122:8080/rest/items/L_HUE_STRIP_Toggle 

 "error": {
    "message": "Item L_HUE_STRIP_Toggle does not exist!",
    "http-code": 404
  }
}

Accordingly in the Magicmirror no connection is made.

Is this a basic OpenHab setup or configuration error?

Note: trying to change the name of the item manually resutls in a “conflict error”

Sorry for the long post. Any help is appreciated!

Cheers
Schummi