@nickthebeer

What’s the toilet roll etc on the display for

Hi, thats the module for the bring list app: https://github.com/rseidt/MMM-bringList
;-)

@sdetweil, @Zoltan, @cowboysdude Thanks for your compliments

Hi,
and again I have finished a bathroom MagicMirror. This time it should be a mirror cabinet by special request, in Germany one says often “Alibert” to this kind of bathroom mirror. And so the MagicAlibert was born.

The principle of my MagicMirror you can see in this post.
You can also find the sources for mirror glass and accessories there.

Exterieur

Interieur

Parts, milled

Parts, Flat dowel

Parts, system 32 holes

Hinge holes

Hinges nearly closed

Hings open

Shell clamped

Shell finished

With back wall

wall mounts

Hole for cable

Body with doors

right door with cutout for screen

left door without cutout

back plane for right door

back plane for right door

doors closed

after painting

hinge

3D prints for left door - bracket glass insert - bracket cross bar

3D prints for left door - bracket glass insert - bracket cross bar

3D prints for left door - bracket glass insert - bracket cross bar

Screen built in

all technic installed

all technic installed

mounted back panel right door

Handles and bracket mounted to hold up the heavy doors

Handles and bracket mounted to hold up the heavy doors

left door open

right door open

finished - ready to moun

I have used:

• Raspberry pi 3
• Beech wood from the hardware store
• Aluminium composite panel (ACP) with cutout (https://www.plattenzuschnitt24.de/ - german: Alu Dibond Platte)
• Spy mirror (https://www.glas-star.de/spionspiegelnachmass/chrome-spy-spiegel/)
• Silicone (PCI Silcofern S) Color: black (Important! Never use transparent silicone. Otherwise you will see it and regret it!)
• Screen (HP 24w (1CA86AA) 60,45 cm (23,8 Zoll) monitor (IPS, Full HD, HDMI)
• Radar motion detector (Amazon Haljia 5 RCWL-0516)

You find a 3D model here

If you want to know more, then ask ;-)

Regards
Josef

Hi @PeterKatana,
im Bad würde ich das nicht machen. Der Woman Acceptance Faktor würde vermutlich rasant in den Keller gehen, wenn auf dem Spiegel ständig “Dapper” (wie man in Bayern sagt) sind.
Ich habe einen Spiegel mit einen Standard 7" Raspberry Monitor. Aber selbst da habe ich Touch am Ende nie benutzt. Es sind bei mir einfach InfoSchirme. Aktionen löse ich über Schalter, Taster, … aus.

@PeterKatana, alles klar, melde dich einfach. Ich werde morgen den MagicAlibert weiterbauen. Die Spiegel sollten nächste Woche kommen ;-)

Hi @SuneRadich ,
all electrical connections are clamped together in junction boxes for damp locations. The Raspberry Pi is also in such a box. Only the connections of the screen are in their original box, which in my view is not specially protected against moisture.
So far, there have been no problems and even if you remove the mirror, you won’t see anything scorched or similar damage.
Regards
Josef

Hallo @PeterKatana,
Ich kann dir den Rahmen auch zuschneiden, wenn du mir die Maße sagst. Vielleicht kommst du ja mal nach Oberschleißheim oder in die Nähe.
Grüße
Sepp

Hi @PeterKatana,
What do you mean by source?
The frame is made of beech wood. You can buy it from a wood dealer or carpenter. I have taken solid wood shelf savior made of beech from the hardware store. These are glued rod-wise and therefore torsion-resistant.
Regards
Josef

@m0bed said in Black screen after 2.13 update - tentatively resolved:

@m0bed So, I changed my config found out that this modules dont work at the moment:
MMM-Homematic-Heaters

The problem are the comments in the two translation files . Remove the comments and it will work again.

Since MMM-Homematic-Heaters seems to be no longer maintained, I have forked the module MMM-Homematic-Thermostats from it and developed it further. There the error is fixed. Maybe changing the module will help :-)

Hi,
please forgive the late reply. It slipped through.

I use these buttons: https://smile.amazon.de/gp/product/B00JSEX1A0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

These have separate connections for “nomaly closed” NC and “normaly open” NO. And there are also the connections for the button LED.

But I did not connect the LEDs. Otherwise, besides the LED of the toothbrush and the LED of the mouthwash and the LED of the razor and … another LED would burn. Then I could slowly save the ceiling lighting in the bathroom :-)