MMM-CalendarExt3

MMRIZE

@Splashed
Maybe one of reason was mentioned by @sdetweil,
The other reason might be fetching finish synchronization issue. When you operate many calendars to fetch, some calendars might not end fetching before drawing CX3 due to hw performance, internet speed, server’s issue, etc.
There would be 2 general solution.

wait for next refreshing cycle. The fetching of calendars may be completed until then.
Or you can use ‘waitFetch’ config value to delay the rendering view.

crisvdn

@MMRIZE Thanks for your response. That actually did this.

The config name is a bit confusing though. It implies waiting to fetch the calendars?
Anyways, thank you for this awesome module :D

gonzonia

I’ve been using MMM-CalendarExt3 for a while now and all is good. Suddenly I’ve got a single event that’s an hour off. The events for the rest of the day are fine, and the time is correct on all other methods (Google Calendar, BusyCal, iOS Calendar).

MMRIZE

@gonzonia Could you send me the ice file(or downloadable url) and your config? (eouia0819@gmail.com)

Splashed

@MMRIZE Seems like you are correct with the refreshing interval. If I simply exercise patience and give it 5-10 minutes then all of my calendars do load.

wperry530

Hello all!

New to building out my magic mirror, and I’m running into a problem. If I understand correctly, this module would allow me to click an event from my google calendar and see the details. When I run the module, I am not getting that feature.

Is it something I’m doing wrong or am I misunderstanding something? Below is my config, and I have installed the lastest version of Electron.

{
  module: "calendar",
  header: "My Calendar",
  config: {
    calendars: [
      {
        symbol: "calendar",
        url: "**super secret**", // Replace with your actual Google Calendar ICS link
		name:"wes",
		color:"red"
      }
    ],
    maximumEntries: 10, // Number of events shown
    maximumNumberOfDays: 365, // Show events up to a year in advance
    displaySymbol: true, // Display the calendar symbol
    defaultSymbol: "calendar", // Default symbol if none specified for calendar
    // Other configuration options can be added here based on your preference
  }
},
{
  module: "MMM-CalendarExt3",
  position: "middle center",
  title: "",
  config: {
    mode: "week",
    instanceId: "basicCalendar",
    maxEventLines: 5,
    firstDayOfWeek: 0,
    calendarSet: ['wes']
  }

MMRIZE

@wperry530
Not only popover feature is not abled? Or some other symptom you have?
If only popover doesn’t work, What browser and version do you use? (Electron or Chromium version I need)

wperry530

@MMRIZE

I tried a fourth uninstall / reinstall along with rebooting and it started to work. Thank you for the quick response!

1lolo94

@MMRIZE - New to MagicMirror and need some help please! I finally got my calendar and google calendar sync’d… but now I lost my weather on the top right of the screen and for some reason the weather is showing for the next 5 days on the calendar - are these related?
Sorry my picture would not upload for some reason :(

	language: "en",
	locale: "en-US",
	logLevel: ["INFO", "LOG", "WARN", "ERROR"], // Add "DEBUG" for even more logging
	timeFormat: 12,
	units: "imperial",

	modules: [
		{
			module: "alert",
		},
		{
			module: "updatenotification",
			position: "top_bar"
		},
		{
			module: "clock",
			position: "top_left"
		},
 {
                        module: "MMM-CalendarExt3",
                        position: "bottom_bar",
                        title: "",
                        config: {
                          mode: "",
                          weekIndex: 0,
                          weeksInView: 4,
                          instanceId: "basicCalendar",
                          locale: 'en-EN',
                          maxEventLines: 5,
                          firstDayOfWeek: 0,
                          refreshInterval: 120000,
                          animationSpeed: 0,
                          useSymbol: false,
                          calendarSet: ['us_holiday','family'],
                }
                },
                {
                        module: "calendar",
                        position: "",
                        config: {
                          broadcastPastEvents: true,
                          calendars: [
                                {
                                  url: "webcal://www.calendarlabs.com/ical-calendar/ics/76/US_Holidays.ics",
                                  name: "us_holiday",
                                  color: "#6699ff"
                                }
                                        ]
                                }
                },
                {
                        module: "calendar",
                        position: "",
                        maximumNumberOfDays: 60,
                        config: {
                          animationSpeed: 0,
                          fetchInterval: 100000,
                          broadcastPastEvents: true,
                          useSymbol: false,
                          calendars: [
                                {
                                  url: "PRIVATE STUFF",                                 
				  name: "family",
                                  color: "yellow",
                                        user: 'xxxxxxxxxxx@gmail.com',
                                        pass: 'x',
                                        method: 'basic'
                                }
                                        ]
                                }
                },

		{
			module: "weather",
			position: "top_center",
			config: {
				weatherProvider: "openweathermap",
				type: "current",
				location: "xxxxx",
				locationID: "5x1x7xxx2xx078", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				apiKey: "xxxxxxx",
				roundTemp: true,
			}
		},
		{
			module: "weather",
			position: "top_center",
			//header: "Weather Forecast",
			config: {
				weatherProvider: "openweathermap",
				type: "forecast",
				location: "xxxx",
				locationID: "51x72x0x78", //ID from http://bulk.openweathermap.org/sample/city.list.json.gz; unzip the gz file and find your city
				apiKey: "xxxxxx",
				fade: false,
				colored: "true",
				roundTemp: true,
			}
		},
	]
};

/*************** DO NOT EDIT THE LINE BELOW ***************/
if (type of module !== "undefined") { module.exports = config; }

CSS FILE (weather was working before adding calendar)


 body { 
 color: #000;
 }
 
 .dimmed {
  color: #000;
  }

.normal {
  color: #000;
}

.bright {
  color: #000;
}
.module.clock {
  background-color:rgba(255,255,255,0.5);
  border-radius:8px;
  padding:8px;
}
.module.weather {
  background-color:rgba(255,255,255,0.5);
  border-radius:8px;
  padding:8px;
}
.module.weather {
  background-color:rgba(255,255,255,0.5);
  border-radius:8px;
  padding:8px;
  color: #000;
}
.dimmed {
/*  color: #666; */
    color: #000;
}
.normal {
/*  color: #999;*/
    color: #000;
}
.bright {
  color: #000;
}
.header {
  color: #000;
}
.MMM-CalendarExt3 {
        margin-bottom: -5px;
        width: 100%;
        height: 575px;
        font-size: 20px;
}
.CX3 .cw {
        display:none
}

.CX3 .event.singleday {
  border-left:4px solid var(--calendarColor);
}

.CX3 .event.singleday:not(.useSymbol)::before {
  content: '';
}

sdetweil

@1lolo94 said in MMM-CalendarExt3:

Sorry my picture would not upload for some reason

pic upload is the third icon from the right above the post editor